kernel.git/drivers/media/dvb/frontends, branch linux-2.6.14.y

[PATCH] dvb: fix NULL pointer dereference when loading the budget-av module

2005-09-28T14:46:40Z

Ralph Metzler wrote: > AFAIR, there is a bug in tda10021.c in tda10021_readreg() which > references state->frontend.dvb->num > This is fatal if the frontend is not at the probed address and thus > not yet registered (no dvb entry set yet -> NULL pointer ...). The attached patch should get rid of the oops. Signed-off-by: Jon Burgess Cc: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: budget-ci: add support for TT DVB-C CI card

2005-09-09T20:57:45Z

Add support for TT DVB-C CI card. Signed-off-by: Andrew de Quincey Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: usb: digitv: support for nxt6000 demod

2005-09-09T20:57:41Z

Add support for the NXT6000-based digitv-box. Add .get_tune_settings callback for the NXT6000 to have a min_tune_delay of 500ms. Signed-off-by: Svante Olofsson Signed-off-by: Patrick Boettcher Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: frontend: or51132: remove bogus optimization attempt

2005-09-09T20:57:40Z

This fix has also been applied to lgdt330x. There is an optimization that keeps track of the frequency tuned by the digital decoder. The digital driver does not set the frequency if it has not changed since it was tuned. The analog tuner driver knows nothing about the frequency saved by the digital driver. When the frequency is set using the video4linux code with tvtime, the hardware get changed but the digital driver's state does not get updated. Switch back to the same digital channel and the driver finds no change in frequency so the tuner is not reset to the digital frequency. The work around is to remove the check and always set the tuner to the specified frequency. Signed-off-by: Mac Michaels Signed-off-by: Michael Krufky Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: frontend: stv0297: QAM128 tuning improvement

2005-09-09T20:57:39Z

while investigating the QAM_128-issue with the stv0297-driver for the Cablestar (which is not the same as the one in dvb-kernel CVS, yet), I fixed it, not by increasing the timeout, but by disabling the corner-detection for QAM_128 and higher. This patch has been tested on dvb-kernel cvs, and has been reported to work by multiple users. Some cards still need timeout increase on top of this patch. This will be addressed later. Signed-off-by: Patrick Boettcher Signed-off-by: Michael Krufky Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: frontend: cx24110: clean up timeout handling.

2005-09-09T20:57:39Z

Clean up timeout handling. Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: frontend: cx24110: another DiSEqC fix

2005-09-09T20:57:39Z

Fix DiSEqC problems. Signed-off-by: Adam Szalkowski Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: frontend: cx24110: DiSEqC fix

2005-09-09T20:57:39Z

Fix DiSEqC switching (one bug fix suggested by Peter Hettkamp, and one experimentally determined msleep(30) suggested by Adam Szalkowski). Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: frontend: ves1820: improve tuning

2005-09-09T20:57:38Z

Reset acgconf register after tuning to improve locking, as suggested by Marco Schluessler. Minor cleanups in ves1820_init(). Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[PATCH] dvb: frontend: tda1004x: fix SNR reading

2005-09-09T20:57:38Z

Fix SNR reading Signed-off-by: Andrew de Quincey Signed-off-by: Johannes Stezenbach Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds