kernel.git/drivers/media/dvb/b2c2, branch linux-3.2.y

[media] drivers/media: do not use EXTRA_CFLAGS

2011-09-03T21:50:59Z

Usage of these flags has been deprecated for nearly 4 years by: commit f77bf01425b11947eeb3b5b54685212c302741b8 Author: Sam Ravnborg Date: Mon Oct 15 22:25:06 2007 +0200 kbuild: introduce ccflags-y, asflags-y and ldflags-y Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command line use. By default, gmake(1) do not override command line setting, so this is likely to result in build failure or unexpected behavior. Replace their usage by Kbuild's `{as,cc,ld}flags-y'. Cc: Sam Ravnborg Cc: Mauro Carvalho Chehab Cc: linux-media@vger.kernel.org Signed-off-by: Arnaud Lacombe Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab

net: remove interrupt.h inclusion from netdevice.h

2011-06-07T05:55:11Z

* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller

[media] use pci_dev->revision

2011-05-20T10:26:16Z

pci_setup_device() has saved the PCI revision in the pci_dev struct since Linux 2.6.23. Use it. Cc: Auke Kok Signed-off-by: Bjørn Mork Signed-off-by: Mauro Carvalho Chehab

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

2011-04-27T22:17:52Z

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (42 commits) [media] media: vb2: correct queue initialization order [media] media: vb2: fix incorrect v4l2_buffer->flags handling [media] s5p-fimc: Add support for the buffer timestamps and sequence [media] s5p-fimc: Fix bytesperline and plane payload setup [media] s5p-fimc: Do not allow changing format after REQBUFS [media] s5p-fimc: Fix FIMC3 pixel limits on Exynos4 [media] tda18271: update tda18271c2_rf_cal as per NXP's rev.04 datasheet [media] tda18271: update tda18271_rf_band as per NXP's rev.04 datasheet [media] tda18271: fix bad calculation of main post divider byte [media] tda18271: prog_cal and prog_tab variables should be s32, not u8 [media] tda18271: fix calculation bug in tda18271_rf_tracking_filters_init [media] omap3isp: queue: Don't corrupt buf->npages when get_user_pages() fails [media] v4l: Don't register media entities for subdev device nodes [media] omap3isp: Don't increment node entity use count when poweron fails [media] omap3isp: lane shifter support [media] omap3isp: ccdc: support Y10/12, 8-bit bayer fmts [media] media: add missing 8-bit bayer formats and Y12 [media] v4l: add V4L2_PIX_FMT_Y12 format cx23885: Fix stv0367 Kconfig dependency [media] omap3isp: Use isp xclk defines ... Fix up trivial conflict (spelink errurs) in drivers/media/video/omap3isp/isp.c

[media] FLEXCOP-PCI: fix __xlate_proc_name-warning for flexcop-pci

2011-04-04T18:58:19Z

This patch fixes the warning about bad names for sys-fs and other kernel-things. The flexcop-pci driver was using '/'-characters in it, which is not good. This has been fixed in several attempts by several people, but obviously never made it into the kernel. Signed-off-by: Patrick Boettcher Cc: Steffen Barszus Cc: Boris Cuber Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

[media] i2c: Stop using I2C_CLASS_TV_DIGITAL

2010-10-21T09:54:26Z

Detection class I2C_CLASS_TV_DIGITAL is set by many adapters but no I2C device driver is setting it anymore, which means it can be dropped. I2C devices on digital TV adapters are instantiated explicitly these days, which is much better. Signed-off-by: Jean Delvare Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12294): b2c2: Use dvb-pll for Cablestar2

2009-09-12T15:17:52Z

The dvb-pll code should do the same thing that alps_tdee4_stv0297_tuner_set_params() was doing. Except the dvb-pll code will check for tuner presence when attaching, while the old code didn't. This tuner appears to not be behind the stv0297's I2C gate but is instead on a different I2C adapter provided by the flexcop chip. The old code would turn the I2C gate off each time the tuner was used. I've changed it to turn the gate off when the tuner is attached and then disable the gate control function. This should result in the gate staying off, which should be even better. [hverkuil@xs4all.nl: fix compile error] Signed-off-by: Trent Piepho Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12293): b2c2: Use dvb-pll for Skystar2 rev 2.3 and rev 2.6

2009-09-12T15:17:52Z

The code in skystar23_samsung_tbdu18132_tuner_set_params() and samsung_tbmu24112_tuner_set_params() is equivalent to what the dvb-pll code does. There could be an issue because the dvb-pll code will probe to check for the tuner, while the previous code didn't do any checks. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (12292): b2c2: Use dvb-pll for AirStar DVB-T's tuner

2009-09-12T15:17:51Z

The code in samsung_tdtc9251dh0_calc_regs() is equivalent to what dvb-pll's code does. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab