kernel.git/drivers/media/dvb/b2c2, branch linux-2.6.31.y

V4L/DVB (12291): b2c2: fix frontends compiled into kernel

2009-07-24T17:03:31Z

A recent patch didn't take into account that frontends can be compiled into the kernel. Or that frontends compiled as modules can't be used by the b2c2 driver if it is not a module itself. Some frontends require multiple drivers, e.g. a demod driver and a tuner driver. The code for the frontend support was getting added if the demod driver was available. Change this to also require any needed tuner or SEC drivers as well. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11894): flexcop-pci: dmesg visible names broken

2009-06-16T22:14:43Z

Changeset 1589a993f074124c3edfff03656e910bb472eeaa broke user visible names of flexcop-pci devices, as it did reorder the enum of card types, but did not adjust the array containing the card names. Reorder the names, and uses [FC_AIR_DVBT] = "Air2PC/AirStar 2 DVB-T" assignment style for more clarity. It also adds the revision Number to the name for SkyStar rev. 2.3 and rev 2.6 as I think it is useful to see in log output. Signed-off-by: Matthias Schwarzott Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11964): b2c2: Fix problems with frontend attachment

2009-06-16T22:07:40Z

The frontend attachment code didn't handle cases where the frontend partially failed to attach. For instance, when the demod was attached successfully but the tuner driver wasn't compiled or fails to init for some reason. In these cases we try to clean up the partial attachment and fail instead of proceeding with a broken frontend. If frontend registration fails, clean up with dvb_frontend_detach() rather than just calling the frontend's main release method. The former does some additional stuff, like release an attached tuner and take care of putting symbols when dynamic binding is used. In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that gets set before skystar2_rev23_attach() is called. Signed-off-by: Trent Piepho Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11829): Rewrote frontend-attach mechanism to gain noise-less deactivation of submodules

2009-06-16T21:21:09Z

This patch is reorganizing the frontend-attach mechanism in order to gain noise-less (superflous prints) deactivation of submodules. Credits go to Uwe Bugla for helping to clean and test the code. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11828): Reducing print-level of I2C error prints

2009-06-16T21:21:09Z

Reducing the print-levle of I2C error prints cleans some unwanted but unavoidable errors from default syslog-level. Signed-off-by: Matthias Schwarzott Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11288): Code cleanup (passes checkpatch now) of the b2c2-flexcop-drivers 2/2

2009-03-30T15:43:47Z

This is the second part of the code cleanup changing the usb and pci-driver cores. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11287): Code cleanup (passes checkpatch now) of the b2c2-flexcop-drivers 1/2

2009-03-30T15:43:47Z

This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two. The code is now passing the checkpatch-script. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11285): Remove unecessary udelay

2009-03-30T15:43:47Z

When resetting the PID-filter block a safety msleep(1) was injected. Now that the function is called from interrupt context, it was replaced with a udelay. It seems that this delay is not necessary at all, let's remove it for now and test a while. Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11284): Fix i2c code of flexcop-driver for rare revisions

2009-03-30T15:43:47Z

This patch adds a workaround in the i2c-code of the flexcop-driver to fix support for SkyStar2 rev 2.7. There are not many devices out there, that's why this bug was not revealed earlier. Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISE

2009-03-30T15:43:31Z

There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab