kernel.git/drivers/media/dvb/b2c2/flexcop.c, branch linux-3.2.y

V4L/DVB (11287): Code cleanup (passes checkpatch now) of the b2c2-flexcop-drivers 1/2

2009-03-30T15:43:47Z

This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two. The code is now passing the checkpatch-script. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (11285): Remove unecessary udelay

2009-03-30T15:43:47Z

When resetting the PID-filter block a safety msleep(1) was injected. Now that the function is called from interrupt context, it was replaced with a udelay. It seems that this delay is not necessary at all, let's remove it for now and test a while. Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards

2009-02-27T01:29:18Z

With (some) Technisat cards you cannot run multiple DVB applications in parallel and switch the channel at the same time. There seems to be a problem on the interfaces or even inside the flexcop-device that can't handle interruption on the streaming interface. This patch adds a watchdog to check whether data is supposed to come in (streaming PIDs are requested) and if no data is seen within 400ms (default) it resets the streaming/pid-filtering hardware. This patch is urgently needed to support the rev 2.8 of the hardware and solves problem occassionally seen on older hardware. Signed-off-by: Uwe Bugla Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

net: convert more to %pM

2008-10-28T00:47:26Z

A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller

V4L/DVB (7538): Adds selectable adapter numbers as per module option

2008-04-24T17:08:00Z

The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau Acked-by: Hermann Pitton Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (7469): Preparation for supporting new devices, cleanup and saneness

2008-04-24T17:07:56Z

To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness: - created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses - initialize i2c before doing the eeprom read - changed the way to attach the different frontends, easier to read now - enabled support for i2c-devices having no register address (1-byte access) Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (6573): unexport flexcop_reset_block_300

2008-01-25T21:02:04Z

This patch removes the unused EXPORT_SYMBOL(flexcop_reset_block_300). Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (4014): Remove the spagetti code gotos that aren't useful

2006-06-25T05:00:23Z

Some code had pointless gotos that just didn't make any sense. They didn't make the code smaller, or faster, or easier to understand. Signed-off-by: Trent Piepho Signed-off-by: Andrew de Quincey Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3762): Add sysfs device links to dvb devices

2006-06-25T04:57:55Z

Currently in /sys/class/dvb/dvbX.demuxY/ we have: dev uevent With the patch, we have (for a PCI DVB device): dev device -> ../../../devices/pci0000:00/0000:00:1e.0/0000:03:0d.0 uevent So userspace tools can (finally) work out which physical device a DVB adapter refers to. Previously you had to kinda look through dmesg and hope that it hadn't been dumped out of the buffer. This makes debugging a lot easier if the system has been up for a long time! This is done by adding an extra 'struct device *' parameter to dvb_register_adapter(). It will work with any kind of standard linux 'device'. Additionally, if someone has an embedded system which does things differently, they can simply supply 'NULL' and the behaviour will be as before - the link will simply not appear. Ack'd-by: Manu Abraham Acked-by: Michael Krufky Signed-off-by: Andrew de Quincey Signed-off-by: Mauro Carvalho Chehab

V4L/DVB (3344a): Conversions from kmalloc+memset to k(z|c)alloc

2006-01-11T21:40:56Z

Conversions from kmalloc+memset to k(z|c)alloc. Signed-off-by: Panagiotis Issaris Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab