kernel.git/drivers/media/dvb-frontends, branch linux-4.20.y

media: dvb-pll: don't re-validate tuner frequencies

2018-11-27T18:51:32Z

The dvb_frontend core already checks for the frequencies. No need for any additional check inside the driver. It is part of the fixes for the following bug: https://bugzilla.opensuse.org/show_bug.cgi?id=1116374 Fixes: a3f90c75b833 ("media: dvb: convert tuner_info frequencies to Hz") Reported-by: Stakanov Schufter Reported-by: Takashi Iwai Cc: stable@vger.kernel.org # For 4.19 Signed-off-by: Mauro Carvalho Chehab

media: dvb-pll: fix tuner frequency ranges

2018-11-27T18:50:58Z

Tuners should report frequencies in Hz. That works fine on most drivers, but, in the case of dvb-pll, some settings are for satellite tuners, while others are for terrestrial/cable ones. The code was trying to solve it at probing time, but that doesn't work, as, when _attach is called, the delivery system may be wrong. Fix it by ensuring that all frequencies are in Hz at the per-tuner max/min values. While here, add a debug message, as this would help to debug any issues there. It partially fixes the following bug: https://bugzilla.opensuse.org/show_bug.cgi?id=1116374 Fixes: a3f90c75b833 ("media: dvb: convert tuner_info frequencies to Hz") Reported-by: Stakanov Schufter Reported-by: Takashi Iwai Cc: stable@vger.kernel.org # For 4.19 Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-10-31T17:53:29Z

Pull new experimental media request API from Mauro Carvalho Chehab: "A new media request API This API is needed to support device drivers that can dynamically change their parameters for each new frame. The latest versions of Google camera and codec HAL depends on such feature. At this stage, it supports only stateless codecs. It has been discussed for a long time (at least over the last 3-4 years), and we finally reached to something that seem to work. This series contain both the API and core changes required to support it and a new m2m decoder driver (cedrus). As the current API is still experimental, the only real driver using it (cedrus) was added at staging[1]. We intend to keep it there for a while, in order to test the API. Only when we're sure that this API works for other cases (like encoders), we'll move this driver out of staging and set the API into a stone. [1] We added support for the vivid virtual driver (used only for testing) to it too, as it makes easier to test the API for the ones that don't have the cedrus hardware" * tag 'media/v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (53 commits) media: dt-bindings: Document the Rockchip VPU bindings media: platform: Add Cedrus VPU decoder driver media: dt-bindings: media: Document bindings for the Cedrus VPU driver media: v4l: Add definition for the Sunxi tiled NV12 format media: v4l: Add definitions for MPEG-2 slice format and metadata media: videobuf2-core: Rework and rename helper for request buffer count media: v4l2-ctrls.c: initialize an error return code with zero media: v4l2-compat-ioctl32.c: add missing documentation for a field media: media-request: update documentation media: media-request: EPERM -> EACCES/EBUSY media: v4l2-ctrls: improve media_request_(un)lock_for_update media: v4l2-ctrls: use media_request_(un)lock_for_access media: media-request: add media_request_(un)lock_for_access media: vb2: set reqbufs/create_bufs capabilities media: videodev2.h: add new capabilities for buffer types media: buffer.rst: only set V4L2_BUF_FLAG_REQUEST_FD for QBUF media: v4l2-ctrls: return -EACCES if request wasn't completed media: media-request: return -EINVAL for invalid request_fds media: vivid: add request support media: vivid: add mc ...

media: au8522: declare its own pads

2018-09-17T17:16:19Z

As we don't need anymore to share pad numbers with similar drivers, use its own pad definition instead of a global model. Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: v4l2: taint pads with the signal types for consumer devices

2018-09-17T17:16:19Z

Consumer devices are provided with a wide different range of types supported by the same driver, allowing different configutations. In order to make easier to setup media controller links, "taint" pads with the signal type it carries. While here, get rid of DEMOD_PAD_VBI_OUT, as the signal it carries is actually the same as the normal video output. The difference happens at the video/VBI interface: - for VBI, only the hidden lines are streamed; - for video, the stream is usually cropped to hide the vbi lines. Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: v4l2: remove VBI output pad

2018-09-17T17:16:19Z

The signal there is the same as the video output (well, except for sliced VBI, but let's simplify the model and ignore it, at least for now - as it is routed together with raw VBI). Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: drxj: fix spelling mistake in fall-through annotations

2018-09-12T15:21:52Z

Replace "falltrough" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva Signed-off-by: Mauro Carvalho Chehab

media: dvb-frontends: add LNBH29 LNB supply driver

2018-09-12T13:24:41Z

Add support for STMicroelectronics LNBH29 LNB supply driver. Signed-off-by: Katsuhiro Suzuki Signed-off-by: Mauro Carvalho Chehab

media: mxl5xx: add a fall-trough annotation

2018-09-12T12:24:54Z

As pointed by Daniel Scheller , sparse warns that a segment may fall through. We're deprecating this warning in favor of gcc 8 equivalent warning. In this specific case, the code for DVB-S applies for DVB-S2. In a matter of fact, several things there (like rolloff factor logic) assume that the transponder is DVB-S2. So, add the corresponding fall-trough markup, for gcc to properly ignore it. Reported-by: Daniel Scheller Signed-off-by: Mauro Carvalho Chehab

media: dvb-frontends/cxd2099: add SPDX license identifier

2018-09-12T11:24:08Z

As both the MODULE_LICENSE and the boilerplates are now in sync and clear that the driver is licensed under the terms of the GPLv2-only, add a matching SPDX license identifier tag. Cc: Ralph Metzler Cc: Manfred Voelkel Signed-off-by: Daniel Scheller Signed-off-by: Mauro Carvalho Chehab