kernel.git/drivers/md/dm.h, branch linux-4.0.y

dm table: train hybrid target type detection to select blk-mq if appropriate

2015-02-09T18:06:47Z

Otherwise replacing the multipath target with the error target fails: device-mapper: ioctl: can't change device type after initial table load. The error target was mistakenly considered to be target type DM_TYPE_REQUEST_BASED rather than DM_TYPE_MQ_REQUEST_BASED even if the target it was to replace was of type DM_TYPE_MQ_REQUEST_BASED. Signed-off-by: Mike Snitzer

dm: allocate requests in target when stacking on blk-mq devices

2015-02-09T18:06:47Z

For blk-mq request-based DM the responsibility of allocating a cloned request is transfered from DM core to the target type. Doing so enables the cloned request to be allocated from the appropriate blk-mq request_queue's pool (only the DM target, e.g. multipath, can know which block device to send a given cloned request to). Care was taken to preserve compatibility with old-style block request completion that requires request-based DM _not_ acquire the clone request's queue lock in the completion path. As such, there are now 2 different request-based DM target_type interfaces: 1) the original .map_rq() interface will continue to be used for non-blk-mq devices -- the preallocated clone request is passed in from DM core. 2) a new .clone_and_map_rq() and .release_clone_rq() will be used for blk-mq devices -- blk_get_request() and blk_put_request() are used respectively from these hooks. dm_table_set_type() was updated to detect if the request-based target is being stacked on blk-mq devices, if so DM_TYPE_MQ_REQUEST_BASED is set. DM core disallows switching the DM table's type after it is set. This means that there is no mixing of non-blk-mq and blk-mq devices within the same request-based DM table. [This patch was started by Keith and later heavily modified by Mike] Tested-by: Bart Van Assche Signed-off-by: Keith Busch Signed-off-by: Mike Snitzer

dm: enhance internal suspend and resume interface

2014-11-19T17:31:17Z

Rename dm_internal_{suspend,resume} to dm_internal_{suspend,resume}_fast -- dm-stats will continue using these methods to avoid all the extra suspend/resume logic that is not needed in order to quickly flush IO. Introduce dm_internal_suspend_noflush() variant that actually calls the mapped_device's target callbacks -- otherwise target-specific hooks are avoided (e.g. dm-thin's thin_presuspend and thin_postsuspend). Common code between dm_internal_{suspend_noflush,resume} and dm_{suspend,resume} was factored out as __dm_{suspend,resume}. Update dm_internal_{suspend_noflush,resume} to always take and release the mapped_device's suspend_lock. Also update dm_{suspend,resume} to be aware of potential for DM_INTERNAL_SUSPEND_FLAG to be set and respond accordingly by interruptibly waiting for the DM_INTERNAL_SUSPEND_FLAG to be cleared. Add lockdep annotation to dm_suspend() and dm_resume(). The existing DM_SUSPEND_FLAG remains unchanged. DM_INTERNAL_SUSPEND_FLAG is set by dm_internal_suspend_noflush() and cleared by dm_internal_resume(). Both DM_SUSPEND_FLAG and DM_INTERNAL_SUSPEND_FLAG may be set if a device was already suspended when dm_internal_suspend_noflush() was called -- this can be thought of as a "nested suspend". A "nested suspend" can occur with legacy userspace dm-thin code that might suspend all active thin volumes before suspending the pool for resize. But otherwise, in the normal dm-thin-pool suspend case moving forward: the thin-pool will have DM_SUSPEND_FLAG set and all active thins from that thin-pool will have DM_INTERNAL_SUSPEND_FLAG set. Also add DM_INTERNAL_SUSPEND_FLAG to status report. This new DM_INTERNAL_SUSPEND_FLAG state is being reported to assist with debugging (e.g. 'dmsetup info' will report an internally suspended device accordingly). Signed-off-by: Mike Snitzer Acked-by: Joe Thornber

dm: add presuspend_undo hook to target_type

2014-11-19T16:24:59Z

The DM thin-pool target now must undo the changes performed during pool_presuspend() so introduce presuspend_undo hook in target_type. Signed-off-by: Mike Snitzer Acked-by: Joe Thornber

dm: allow active and inactive tables to share dm_devs

2014-10-06T00:03:35Z

Until this change, when loading a new DM table, DM core would re-open all of the devices in the DM table. Now, DM core will avoid redundant device opens (and closes when destroying the old table) if the old table already has a device open using the same mode. This is achieved by managing reference counts on the table_devices that DM core now stores in the mapped_device structure (rather than in the dm_table structure). So a mapped_device's active and inactive dm_tables' dm_dev lists now just point to the dm_devs stored in the mapped_device's table_devices list. This improvement in DM core's device reference counting has the side-effect of fixing a long-standing limitation of the multipath target: a DM multipath table couldn't include any paths that were unusable (failed). For example: if all paths have failed and you add a new, working, path to the table; you can't use it since the table load would fail due to it still containing failed paths. Now a re-load of a multipath table can include failed devices and when those devices become active again they can be used instantly. The device list code in dm.c isn't a straight copy/paste from the code in dm-table.c, but it's very close (aside from some variable renames). One subtle difference is that find_table_device for the tables_devices list will only match devices with the same name and mode. This is because we don't want to upgrade a device's mode in the active table when an inactive table is loaded. Access to the mapped_device structure's tables_devices list requires a mutex (tables_devices_lock), so that tables cannot be created and destroyed concurrently. Signed-off-by: Benjamin Marzinski Signed-off-by: Mike Snitzer

dm table: make dm_table_supports_discards static

2014-08-01T16:30:34Z

The function dm_table_supports_discards is only called from dm-table.c:dm_table_set_restrictions(). So move it above dm_table_set_restrictions and make it static. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm table: add dm_table_run_md_queue_async

2014-03-27T20:56:24Z

Introduce dm_table_run_md_queue_async() to run the request_queue of the mapped_device associated with a request-based DM table. Also add dm_md_get_queue() wrapper to extract the request_queue from a mapped_device. Signed-off-by: Mike Snitzer Signed-off-by: Hannes Reinecke Reviewed-by: Jun'ichi Nomura

dm: make dm_table_alloc_md_mempools static

2014-03-27T20:56:23Z

Make the function dm_table_alloc_md_mempools static because it is not called from another file. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer

dm sysfs: fix a module unload race

2014-01-15T04:23:04Z

This reverts commit be35f48610 ("dm: wait until embedded kobject is released before destroying a device") and provides an improved fix. The kobject release code that calls the completion must be placed in a non-module file, otherwise there is a module unload race (if the process calling dm_kobject_release is preempted and the DM module unloaded after the completion is triggered, but before dm_kobject_release returns). To fix this race, this patch moves the completion code to dm-builtin.c which is always compiled directly into the kernel if BLK_DEV_DM is selected. The patch introduces a new dm_kobject_holder structure, its purpose is to keep the completion and kobject in one place, so that it can be accessed from non-module code without the need to export the layout of struct mapped_device to that code. Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org

dm: wait until embedded kobject is released before destroying a device

2014-01-08T02:01:43Z

There may be other parts of the kernel holding a reference on the dm kobject. We must wait until all references are dropped before deallocating the mapped_device structure. The dm_kobject_release method signals that all references are dropped via completion. But dm_kobject_release doesn't free the kobject (which is embedded in the mapped_device structure). This is the sequence of operations: * when destroying a DM device, call kobject_put from dm_sysfs_exit * wait until all users stop using the kobject, when it happens the release method is called * the release method signals the completion and should return without delay * the dm device removal code that waits on the completion continues * the dm device removal code drops the dm_mod reference the device had * the dm device removal code frees the mapped_device structure that contains the kobject Using kobject this way should avoid the module unload race that was mentioned at the beginning of this thread: https://lkml.org/lkml/2014/1/4/83 Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org