kernel.git/drivers/input/mouse/elantech.c, branch linux-2.6.35.y

Input: elantech - discard the first 2 positions on some firmwares

2011-08-01T20:54:44Z

commit 7f29f17b57255b6395046805a98bc663ded63fb8 upstream. According to the Dell/Ubuntu driver, what was previously observed as "jumpy cursor" corresponds to the hardware sending incorrect data for the first two reports of a one touch finger. So let's use the same workaround as in the other driver. Also, detect another firmware version with the same behaviour, as in the other driver. Signed-off-by: Éric Piel Signed-off-by: Dmitry Torokhov Signed-off-by: Andi Kleen [bwh: Adjust for 2.6.32] [ak: adjust for 2.6.35] Signed-off-by: Greg Kroah-Hartman

Input: elantech - relax signature checks

2010-05-19T17:15:13Z

Apparently there are Elantech touchpads that report non-zero in the 2nd byte of their signature. Adjust the detection routine so that if 2nd byte is zero and 3rd byte contains value that is not a valid report rate, we still assume that signature is valid. Tested-by: Eric Piel Signed-off-by: Dmitry Torokhov

Input: elantech - enforce common prefix on messages

2010-05-19T17:15:02Z

Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2010-05-13T14:28:43Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad7877 - keep dma rx buffers in seperate cache lines Input: psmouse - reset all types of mice before reconnecting Input: elantech - use all 3 bytes when checking version Input: iforce - fix Guillemot Jet Leader 3D entry Input: iforce - add Guillemot Jet Leader Force Feedback

Input: elantech - use all 3 bytes when checking version

2010-05-13T07:43:19Z

Apparently all 3 bytes returned by ETP_FW_VERSION_QUERY are significant and should be taken into account when matching hardware version/features. Tested-by: Eric Piel Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2010-05-05T14:53:18Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - allow binding to button-only devices Input: elantech - ignore high bits in the position coordinates Input: elantech - allow forcing Elantech protocol Input: elantech - fix firmware version check Input: ati_remote - add some missing devices from lirc_atiusb Input: eeti_ts - cancel pending work when going to suspend Input: Add support of Synaptics Clickpad device Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops" Input: psmouse - ignore parity error for basic protocols

Input: elantech - ignore high bits in the position coordinates

2010-05-04T06:35:11Z

In older versions of the elantech hardware/firmware those bits always were unset, so it didn't actually matter, but newer versions seem to use those high bits for something else, screwing up the coordinates we report to the input layer for those devices. Signed-off-by: Florian Ragwitz Signed-off-by: Dmitry Torokhov

Input: elantech - allow forcing Elantech protocol

2010-05-04T06:34:33Z

Apparently hardware vendors now ship elantech touchpads with different version magic. This options allows for them to be tested easier with the current driver in order to add their magic to the whitelist later. Signed-off-by: Florian Ragwitz Signed-off-by: Dmitry Torokhov

Input: elantech - fix firmware version check

2010-05-04T06:34:13Z

The check determining whether device should use 4- or 6-byte packets was trying to compare firmware with 2.48, but was failing on majors greater than 2. The new check ensures that versions like 4.1 are checked properly. Signed-off-by: Florian Ragwitz Signed-off-by: Dmitry Torokhov

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn