kernel.git/drivers/iio/proximity, branch linux-6.15.y

Merge tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2025-03-14T06:15:12Z

Jonathan writes: IIO: New device support, features and cleanup for the 6.15 cycle. The usual mixture of new drivers, support in existing drivers for new devices, a range of features and general subsystem cleanup. Two merges of immutable branches in here: * SPI offload support. Culmination of a long effort to bring the ability to offload triggered sequences of SPI operations to specific hardware, allow high datarate acquisition over an SPI bus (if you have the right hardware / FPGA firmware) * GPIO set-array-helper - enables code simplification. New device support ================== adi,ad3552r-hs: - Add support for AD3541r and AD3542r via newly supported FPGA HDL. adi,ad4030 - New driver supporting the AD4030, AD4630 AD4630-16, AD4640-24, AD4632-16, AD4632-24 1 and 2 channel high precision SPI ADCs. adi,ad4851 - New driver and backend support for the AD4851, AD4852, AD4853, AD4854, AD4855, AD4846, AD4857, AD4858 and AD4858I high speed multichannel simultaneous sampling ADCs. adi,ad7191 - New driver for this 24-bit ADC for precision bridge applications, adi,ad7380 - Add support for the adaq4381-4 which is a 14-bit version of the already supported adaq4380-1 adi,adis16550 - New driver using the ADIS library (which needed extensions) for this IMU. brcm,apds9160 - New driver for this proximity and ambient light sensor. dynaimage,al3000a - New driver for this illuminance sensor. mcube,mc3230 - Add support for the mc3510c accelerometer with a different scale to existing supported parts (some rework preceded this) nxp,imx93 - Add compatibles for imx94 and imx95 which are fully compatible with imx93. rockchip,saradc - Add support for the RK3528 ADC - Add support for the RK3562 ADC silab,si7210 - New driver to support this I2C Hall effect magnetic position sensor. ti,ads7138 - New driver supporting the ADS7128 and AD7138 I2C ADCs. Staging driver drop =================== adi,adis16240 - Drop this impact sensor. Interesting part but complex hence never left staging due to ABI challenges. No longer readily available so drop driver. New features ============ Documentation - A really nice overview document introduce ADC terminology and how it maps to IIO. core - New description for FAULT events, used in the ad7173. - filter_type ABI used in ad4130. buffer-dmaengine - Split DMA channel request from buffer allocation (for SPI offload) - Add a new _with_handle setup variant. (for SPI offload) adi,adf4371 - Add control of reference clock type and support for frequency doubling where appropriate. adi,ad4695 - Support SPI offload. - Support oversampling control. adi,ad5791 - Support SPI offload. adi,ad7124 - Add channel calibration support. adi,ad7380: - Alert support (threshold interrupts) - SPI offload support. adi,ad7606 - Support writing registers when using backend enabling software control of modes. adi,ad7944 - Support SPI offload. adi,ad9832 - Use devm_regulator_get_enable() to simplify code. adi,ad9834 - Use devm_regulator_get_enable() to simplify code. adi,adxl345 - Improve IRQ handling code. - Add debug access to registers. bosch,bmi270 - Add temperature channel support. - Add data ready trigger. google,cross_ec - Add trace events. mcube,mc3230 - Add mount matrix support - Add an OF match table. Cleanup and minor bug fixes =========================== Tree wide: - Stop using iio_device_claim_direct_scoped() and introduce sparse friendly iio_device_claim/release_direct() The conditional scoped cleanup has proved hard to deal with, requiring workarounds for various compiler issues and in is rather non-intuitive so abandon that experiment. One of the attractions of that approach was that it made it much harder to have unbalanced claim/release bugs so instead introduce a conditional-lock style boolean returning new pair of functions. These are inline in the header and have __acquire and __release calls allowing sparse to detect lack of balance. There are occasional false positives but so far those have reflected complex code paths that benefited from cleanup anyway. The first set of driver conversions are in this pull request, more to follow next cycle. Various related cleanup in drivers. Removal of the _scoped code is completed and the definition removed. - Use of str_enable_disable() and similar helpers. - Don't set regmap cache to REGCACHE_NONE as that's the default anyway. - Change some caches from RBTREE to MAPLE reflecting best practice. - Use the new gpiod_multi_set_value_cansleep() - Make sure to grab direct mode for some calibrations paths. - Avoid using memcmp on structures when checking for matching channel configs. Instead just match field by field. dt-bindings: - Fix up indentation inconsistencies. gts-helper: - Simplify building of available scale table. adi,ad-sigma-delta - Make sure to disable channel after calibration done. - Add error handling in configuring channel during calibration. adi,ad2s1201 - use a bitmap_write() rather than directly accessing underlying storage. adi,ad3552r-hs - Fix a wrong error message. - Make sure to use instruction mode for configuration. adi,ad4695 - Add a conversion to ensure exit from conversion mode. - Use custom regmap to handle required sclk rate change. - Fix an out of bounds array access - Simplify oversampling ratio handling. adi,ad4851 - Fix a sign bug. adi,ad5791 - Fix wrong exported number of storage bits. adi,ad7124 - Disable all channels at probe to avoid strange initial configurations. adi,ad7173 - Rework to allow static const struct ad_sigma_delta without need to make a copy. adi,ad7623 - Drop a BSD license tag that the authors consider unnecessary. adi,ad7768-1 - Fix channels sign description exposed to user space. - Set MOSI idle state to avoid accidental device reset. - Avoid some overkill locking. adi,axi-dac - Check if device interface is busy when enabling data stream. - Add control of bus mode. bosch,bmi270 - Move a struct definition to a c file as only used there. vishay,veml6030 - Enable regmap cache to reduce bus traffic. - Fix ABI bug around scale reporting. vishay,vem6075 - Check array bounds to harden against broken hardware. Various other minor tweaks and fixes not called out. * * tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (223 commits) doc: iio: ad7380: describe offload support iio: ad7380: add support for SPI offload iio: light: Add check for array bounds in veml6075_read_int_time_ms iio: adc: ti-ads7924 Drop unnecessary function parameters staging: iio: ad9834: Use devm_regulator_get_enable() staging: iio: ad9832: Use devm_regulator_get_enable() iio: gyro: bmg160_spi: add of_match_table dt-bindings: iio: adc: Add i.MX94 and i.MX95 support iio: adc: ad7768-1: remove unnecessary locking Documentation: ABI: add wideband filter type to sysfs-bus-iio iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset iio: adc: ad7768-1: Fix conversion result sign iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config() iio: adc: ad7124: Implement system calibration iio: adc: ad7124: Implement internal calibration at probe time iio: adc: ad_sigma_delta: Add error checking for ad_sigma_delta_set_channel() iio: adc: ad4130: Adapt internal names to match official filter_type ABI iio: adc: ad7173: Fix comparison of channel configs iio: adc: ad7124: Fix comparison of channel configs iio: adc: ad4130: Fix comparison of channel setups ...

iio: proximity: sx9360: Stop using iio_device_claim_direct_scoped()

2025-02-17T12:57:31Z

This complex cleanup.h use case of conditional guards has proved to be more trouble that it is worth in terms of false positive compiler warnings and hard to read code. Move directly to the new claim/release_direct() that allow sparse to check for unbalanced context Reviewed-by: Gwendal Grignou Reviewed-by: David Lechner Link: https://patch.msgid.link/20250209180624.701140-8-jic23@kernel.org Signed-off-by: Jonathan Cameron

iio: proximity: sx9324: Stop using iio_device_claim_direct_scoped()

2025-02-17T12:57:31Z

iio: proximity: sx9310: Stop using iio_device_claim_direct_scoped()

2025-02-17T12:57:31Z

This complex cleanup.h use case of conditional guards has proved to be more trouble that it is worth in terms of false positive compiler warnings and hard to read code. Move directly to the new claim/release_direct() that allow sparse to check for unbalanced context. Reviewed-by: Gwendal Grignou Reviewed-by: David Lechner Link: https://patch.msgid.link/20250209180624.701140-6-jic23@kernel.org Signed-off-by: Jonathan Cameron

iio: proximity: Fix use-after-free in hx9023s_send_cfg()

2025-02-03T19:30:11Z

Reorder the assignment of fw_size to happen before release_firmware() to avoid accessing the firmware structure after it's been freed. Fixes: e9ed97be4fcc ("iio: proximity: hx9023s: Added firmware file parsing functionality") Closes: https://scan7.scan.coverity.com/#/project-view/52337/11354?selectedIssue=1602791 Signed-off-by: Dheeraj Reddy Jonnalagadda Reviewed-by: David Lechner Link: https://patch.msgid.link/20250107123510.44978-1-dheeraj.linuxdev@gmail.com Signed-off-by: Jonathan Cameron

iio: Use str_enable_disable-like helpers

2025-02-03T19:15:37Z

Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20250114192716.912476-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron

iio: proximity: Use aligned_s64 instead of open coding alignment.

2024-12-28T14:28:15Z

Use this new type to both slightly simplify the code and avoid confusing static analysis tools. Mostly this series is about consistency to avoid this code pattern getting copied into more drivers. Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20241215182912.481706-6-jic23@kernel.org Signed-off-by: Jonathan Cameron

iio: proximity: hx9023s: Added firmware file parsing functionality

2024-12-28T14:28:14Z

Configuration information is now prioritized from the firmware file. If the firmware file is missing or fails to parse, the driver falls back to using the default configuration list for writing the settings. Signed-off-by: Yasin Lee Link: https://patch.msgid.link/20241216-hx9023s-firmware-20241209-v2-1-ce1b0a1121d0@gmail.com Signed-off-by: Jonathan Cameron

iio: proximity: aw96103: Constify struct iio_info

2024-12-07T17:54:21Z

'struct iio_info' is not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security, especially when the structure holds some function pointers. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 17366 1454 16 18836 4994 drivers/iio/proximity/aw96103.o After: ===== text data bss dec hex filename 17526 1294 16 18836 4994 drivers/iio/proximity/aw96103.o Signed-off-by: Christophe JAILLET Link: https://patch.msgid.link/da4918af46fef03903ab0e9fdcb4f23e014f3821.1733522812.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron

module: Convert symbol namespace to string literal

2024-12-02T19:34:44Z

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

kernel.git/drivers/iio/proximity, branch linux-6.15.y

Merge tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

iio: proximity: sx9360: Stop using iio_device_claim_direct_scoped()

iio: proximity: sx9324: Stop using iio_device_claim_direct_scoped()

iio: proximity: sx9310: Stop using iio_device_claim_direct_scoped()

iio: proximity: Fix use-after-free in hx9023s_send_cfg()

iio: Use str_enable_disable-like helpers

iio: proximity: Use aligned_s64 instead of open coding alignment.

iio: proximity: hx9023s: Added firmware file parsing functionality

iio: proximity: aw96103: Constify struct iio_info​

module: Convert symbol namespace to string literal

iio: proximity: aw96103: Constify struct iio_info