kernel.git/drivers/iio/proximity, branch linux-5.9.y

iio:proximity:mb1232: Fix timestamp alignment and prevent data leak.

2020-08-22T10:38:54Z

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses a 16 byte s16 array on the stack As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data with alignment ensured by use of an explicit c structure. This data is allocated with kzalloc so no data can leak appart from previous readings. In this case the forced alignment of the ts is necessary to ensure correct padding on x86_32 where the s64 would only be 4 byte aligned. Fixes: 16b05261537e ("mb1232.c: add distance iio sensor with i2c") Reported-by: Lars-Peter Clausen Cc: Andreas Klinger Signed-off-by: Jonathan Cameron Cc: Reviewed-by: Andy Shevchenko

Replace HTTP links with HTTPS ones: drivers/iio

2020-07-13T14:05:59Z

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Jonathan Cameron

iio: Move attach/detach of the poll func to the core

2020-06-20T16:34:44Z

All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Tested-by: Eugen Hristev #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron

iio: remove left-over parent assignments

2020-06-14T10:50:04Z

These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: remove explicit IIO device parent assignment

2020-06-14T10:49:59Z

This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: proximity: ping: pass reference to IIO device as param to ping_read()

2020-05-21T18:39:25Z

Since there will be some changes to how iio_priv_to_dev() is implemented, it could be that the helper becomes a bit slower, as it will be hidden away in the IIO core. But even without that rework, this looks like it can pass the 'indio_dev' object to ping_read() and obtain the state struct via iio_priv() which is a preferred practice than going back-n-forth (getting the state-struct, then using iio_priv_to_dev() to get the indio_dev object back). Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: proximity: Add driver support for vcnl3020 proximity sensor

2020-05-21T18:12:42Z

Proximity sensor driver based on light/vcnl4000.c code. For now supports only the single on-demand measurement. The VCNL3020 is a fully integrated proximity sensor. Fully integrated means that the infrared emitter is included in the package. It has 16-bit resolution. It includes a signal processing IC and features standard I2C communication interface. It features an interrupt function. Datasheet: http://www.vishay.com/docs/84150/vcnl3020.pdf Signed-off-by: Ivan Mikhaylov Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2020-04-23T09:06:48Z

Jonathan writes: First set of new IIO device support, features and cleanup for the 5.8 cycle Usual mix of new drivers, new support in old drivers and lots of minor cleanup. Yaml conversions also continue to trickle in (plenty more to go!) New device support * ad7476 - Add ad7091 support (ID only) * ad9467 - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC. * adi-axi-adc - New driver to support ADIs generic AXI ADC IP core, used to provide high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually paired with a device using a slow configuration interface (spi etc) Includes DT bindings and some fixes for fpga headers. * bmg160 - Add support for BMI088 (ID only) * max1241 - New driver for this ADC. * st_sensors - Add support for LIS2HH12 accelerometer * sx9310 - New driver supporting sx9310 and sx9311 proximity sensors. Yaml DT binding conversions * rockchip-saradc (including adding some missing parts) * stm32-dac * tsl2563 * vcnl4000 Features * st_lsm6dsx - Add LIS3MDL as a possible sensor hub device. * vcnl4000 - Add new concept of near level (from DT) to provide to userspace which often needs to have some calibrated concept of 'near'. Cleanups, minor fixes etc. * core - Use snprintf for functions where strings are built and there is potential for overflow. - Correct docs to indicate mlock should not be used directly by drivers. - Fix up accidental dropping of a patch to use bitmap_zalloc. - Stop allowing enabling of buffers with no channels enabled. - Drop unused 'stufftoread' from iio_buffer. - Drop scan_el_attrs form iio_buffer as unused. - Reorder sanity checks in __iio_device_register to fail earlier. - Drop all the devm_ runregister / free functions from IIO as they were never used and encourage poor design. * dma-buffer - Tidy up includes. * dma-engine-buffer - Provide dev-managed allocator. - Fix an issue with printing a size_t * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150) - Replace some unnecessary casts of error ptrs and whilst there. use the %pe printf parameter to print them in a more useful fashion. * cross subsystem - Drop casts in calls to regmap_bulk_read as they make no sense. - Use devm_platform_ioremap_resource to reduce boilerplate. - Fix typos in Analog Devices. * counters/104-quad - Add Syed Nayyar Waris as an additional maintainer. * ad7476 - Generate CONVST signal internally rather than requiring external trigger. Add sysfs read back as can now do so. - use devm_add_action_or_reset to tidy up error and remove handling. * ad7793 - Switch to read_avail from explicit attribute. Mostly done to avoid confusing people with a - sign (without surounding spaces) that was correct but checkpatch didn't like. * adis library - Add missing newlines at end of error messages. * adis16400 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * adis16460 - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR. * ad_sigma_delta - Move some channel definitions into individual drivers to avoid having to deal with complex options. * ak8974 - Silence an error on deffered probe. * bmp280 - Harden against IRQ before registration. - Convert to read_avail instead of opencoding the equivalent. - Explicitly mark GPIO as optional. - Cleanup casts. - Remove line breaks from strings. * htts221 - Replace direct access to platform_data with dev_get_platdata(). - Use device properties rather than device tree ones to allow ACPI probing. - Casting cleanups. * intel_mrfld_adc - Don't use unaligned accessor for aligned data. * isl29125 - Reorder buer pre and post hooks to allow for coming core rework. * ltc2983 - Remove comp to bool. * max1363 - Stop using mlock from the iio_dev directly in favour of a local lock with clearly defined scope. * max30100 - Use generic device properties to allow ACPI probe. * mpu6050 - Convert to i2c_new_client_device. - Add debugfs register access. * st_lsm6dsx - Provide means of configuring full scale on slave device if supported. - Drop include of st_sensors header to get one value. Its not otherwise used by this driver. * st-sensors - Replace direct access to platform_data with dev_get_platdata(). - Casting cleanups. - Avoid splitting strings. * st_uvis25 - Casting cleanups. * tsl2563 - Typo fix. * tsl2772 - scnprintf in a non obvious string building usecase. Note also 'fixes' a wrong calculation of remaining space that couldn't actually cause any trouble as there was lots of room. * xilinx-xadc - Fix Lars-Peter spelling his own name wrong :) + additional typos. * tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits) iio: magnetometer: ak8974: Silence deferred-probe error Documentation: ABI: document IIO in_proximity_nearlevel file iio: vcnl4000: Export near level property for proximity sensor dt-bindings: iio: light: vcnl4000: Add proximity-near-level dt-bindings: iio: Introduce common properties for iio sensors dt-bindings: iio: vcnl4000: convert bindings to YAML format iio: Fix misspellings of "Analog Devices" iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource iio: adc: at91-adc: Use devm_platform_ioremap_resource iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk* iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions. iio:chemical:bme680: Tidy up parameters to regmap_bulk_read iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver iio: buffer: drop devm_iio_kfifo_free() API call iio: buffer: drop devm_iio_hw_consumer_free() API call ...

Merge 5.6-rc7 into staging-next

2020-03-23T07:01:20Z

We need the staging/iio fixes in here as well Signed-off-by: Greg Kroah-Hartman

iio: Add SEMTECH SX9310/9311 sensor driver

2020-03-21T10:28:20Z

Add SEMTECH SX9310/9311 driver. The device has the following entry points: Usual frequency: - sampling_frequency - sampling_frequency_available Instant reading of current values for different sensors: - in_proximity0_raw - in_proximity1_raw - in_proximity2_raw - in_proximity3_comb_raw and associated events in events/ Signed-off-by: Gwendal Grignou Signed-off-by: Enrico Granata Signed-off-by: Daniel Campello Signed-off-by: Jonathan Cameron