kernel.git/drivers/iio/pressure, branch linux-6.8.y

iio: pressure: Fixes SPI support for BMP3xx devices

2024-05-17T10:15:02Z

commit 5ca29ea4e4073b3caba750efe155b1bd4c597ca9 upstream. Bosch does not use unique BMPxxx_CHIP_ID for the different versions of the device which leads to misidentification of devices if their ID is used. Use a new value in the chip_info structure instead of the BMPxxx_CHIP_ID, in order to choose the correct regmap_bus to be used. Fixes: a9dd9ba32311 ("iio: pressure: Fixes BMP38x and BMP390 SPI support") Signed-off-by: Vasileios Amoiridis Link: https://lore.kernel.org/r/20240316110743.1998400-3-vassilisamir@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: pressure: Fixes BME280 SPI driver data

2024-05-17T10:15:02Z

commit 546a4f4b5f4d930ea57f5510e109acf08eca5e87 upstream. Use bme280_chip_info structure instead of bmp280_chip_info in SPI support for the BME280 sensor. Fixes: 0b0b772637cd ("iio: pressure: bmp280: Use chip_info pointers for each chip as driver data") Signed-off-by: Vasileios Amoiridis Link: https://lore.kernel.org/r/20240316110743.1998400-2-vassilisamir@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: pressure: mprls0025pa fix off-by-one enum

2024-03-26T22:17:28Z

[ Upstream commit 9e65506ca9c7ff716c8441a33417820ad61d3a16 ] Fix off-by-one error in transfer-function property. The honeywell,transfer-function property takes values between 1-3 so make sure the proper enum gets used. Fixes: 713337d9143ed ("iio: pressure: Honeywell mprls0025pa pressure sensor") Co-developed-by: Andreas Klinger Signed-off-by: Andreas Klinger Signed-off-by: Petre Rodan Link: https://lore.kernel.org/r/20231229092445.30180-5-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: dlhl60d: Initialize empty DLH bytes

2024-02-25T12:11:31Z

3 bytes were being read but 4 were being written. Explicitly initialize the unused bytes to 0 and refactor the loop to use direct array indexing, which appears to silence a Clang false positive warning[1]. Indent improvement included for readability of the fixed code. Link: https://github.com/ClangBuiltLinux/linux/issues/2000 [1] Fixes: ac78c6aa4a5d ("iio: pressure: Add driver for DLH pressure sensors") Signed-off-by: Kees Cook Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240223172936.it.875-kees@kernel.org Cc: Signed-off-by: Jonathan Cameron

iio: pressure: Fixes BMP38x and BMP390 SPI support

2024-02-24T17:57:07Z

According to the datasheet of BMP38x and BMP390 devices, for an SPI read operation the first byte that is returned needs to be dropped, and the rest of the bytes are the actual data returned from the sensor. Reviewed-by: Andy Shevchenko Fixes: 8d329309184d ("iio: pressure: bmp280: Add support for BMP380 sensor family") Signed-off-by: Vasileios Amoiridis Acked-by: Angel Iglesias Link: https://lore.kernel.org/r/20240219191359.18367-1-vassilisamir@gmail.com Cc: Signed-off-by: Jonathan Cameron

iio: pressure: bmp280: Add missing bmp085 to SPI id table

2024-01-22T18:59:06Z

"bmp085" is missing in bmp280_spi_id[] table, which leads to the next warning in dmesg: SPI driver bmp280 has no spi_device_id for bosch,bmp085 Add "bmp085" to bmp280_spi_id[] by mimicking its existing description in bmp280_of_spi_match[] table to fix the above warning. Signed-off-by: Sam Protsenko Fixes: b26b4e91700f ("iio: pressure: bmp280: add SPI interface driver") Reviewed-by: Andy Shevchenko Reviewed-by: Linus Walleij Cc: Signed-off-by: Jonathan Cameron

iio: pressure: driver for Honeywell HSC/SSC series

2023-12-11T19:16:35Z

Adds driver for digital Honeywell TruStability HSC and SSC series pressure and temperature sensors. Communication is one way. The sensor only requires 4 bytes worth of clock pulses on both i2c and spi in order to push the data out. The i2c address is hardcoded and depends on the part number. There is no additional GPIO control. code is now based on iio/togreg Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf [HSC] Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf [SSC] Signed-off-by: Petre Rodan Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231207164634.11998-2-petre.rodan@subdimension.ro Signed-off-by: Jonathan Cameron

iio: pressure: bmp280: Add support for BMP390

2023-11-16T19:10:27Z

Add BMP390 device ID to the supported IDs on bmp380 sensor family Signed-off-by: Angel Iglesias Link: https://lore.kernel.org/r/d6a9e9ca4670c7401545d0d086cd3059e29044c8.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron

iio: pressure: bmp280: Allow multiple chips id per family of devices

2023-11-16T19:10:27Z

Improve device detection in certain chip families known to have various chip IDs. When no ID matches, give a warning but follow along what device said on the firmware side and try to configure it. Signed-off-by: Angel Iglesias Link: https://lore.kernel.org/r/eade22d11e9de4405ea19fdaa5a8249143ae94df.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron

iio: pressure: bmp280: Rearrange vars in reverse xmas tree order

2023-11-16T19:10:27Z

Small cleanup reordering local variable declarations following reverse christmas tree convention. Signed-off-by: Angel Iglesias Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/bb63a996eb9c4555bf83471770f0169d2627e79c.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron