kernel.git/drivers/iio/pressure, branch linux-5.9.y

Merge 5.8-rc6 into staging-next

2020-07-20T07:37:31Z

We need the staging fixes in here, and it resolves a merge issue with an iio driver. Signed-off-by: Greg Kroah-Hartman

Replace HTTP links with HTTPS ones: drivers/iio

2020-07-13T14:05:59Z

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Jonathan Cameron

iio:pressure:ms5611 Fix buffer element alignment

2020-07-05T13:22:48Z

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here there is no data leak possibility so use an explicit structure on the stack to ensure alignment and nice readable fashion. The forced alignment of ts isn't strictly necessary in this driver as the padding will be correct anyway (there isn't any). However it is probably less fragile to have it there and it acts as documentation of the requirement. Fixes: 713bbb4efb9dc ("iio: pressure: ms5611: Add triggered buffer support") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Acked-by: Tomasz Duszynski Cc:

iio: Move attach/detach of the poll func to the core

2020-06-20T16:34:44Z

All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Tested-by: Eugen Hristev #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron

iio: pressure: zpa2326: handle pm_runtime_get_sync failure

2020-06-14T14:25:04Z

Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support") Cc: Signed-off-by: Jonathan Cameron

iio: Remove superfluous of_node assignments

2020-06-14T13:20:08Z

If a driver does not assign an of_node to a IIO device to IIO core will automatically assign the of_node of the parent device. This automatic assignment is done in the iio_device_register() function. There is a fair amount of drivers that currently manually assign the of_node of the IIO device. All but 4 of them can make use of the automatic assignment though. The exceptions are: * mxs-lradc-adc: Which uses the of_node of the parent of the parent. * stm32-dfsdm-adc, stm32-adc and stm32-dac: Which reference the of_node assigned to the IIO device before iio_device_register() is called. All other drivers are updated to use automatic assignment. This reduces the amount of boilerplate code involved in setting up the IIO device. The patch has mostly been auto-generated with the following semantic patch // @exists@ expression indio_dev; expression parent; @@ indio_dev = $devm_iio_device_alloc\|iio_device_alloc$(&parent, ...) ... -indio_dev->dev.of_node = parent.of_node; @exists@ expression indio_dev; expression parent; @@ indio_dev = $devm_iio_device_alloc\|iio_device_alloc$(parent, ...) ... -indio_dev->dev.of_node = parent->of_node; // Signed-off-by: Lars-Peter Clausen Reviewed-by: Andy Shevchenko Signed-off-by: Jonathan Cameron

iio: remove left-over parent assignments

2020-06-14T10:50:04Z

These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: remove explicit IIO device parent assignment

2020-06-14T10:49:59Z

This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: cros_ec: Reapply range at resume

2020-06-14T10:49:41Z

EC does not currently preserve range across sensor reinit. If sensor is powered down at suspend, it will default to the EC default range at resume, not the range set by the host. Save range if modified, and apply at resume. Signed-off-by: Gwendal Grignou Signed-off-by: Jonathan Cameron

iio: bmp280: fix compensation of humidity

2020-05-11T19:19:19Z

Limit the output of humidity compensation to the range between 0 and 100 percent. Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity. Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3. Although this clamp is documented, it was never in the driver of the kernel. It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures. Signed-off-by: Andreas Klinger Signed-off-by: Jonathan Cameron