kernel.git/drivers/iio/pressure, branch linux-5.7.y

iio:pressure:ms5611 Fix buffer element alignment

2020-07-22T07:34:03Z

commit 8db4afe163bbdd93dca6fcefbb831ef12ecc6b4d upstream. One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. Here there is no data leak possibility so use an explicit structure on the stack to ensure alignment and nice readable fashion. The forced alignment of ts isn't strictly necessary in this driver as the padding will be correct anyway (there isn't any). However it is probably less fragile to have it there and it acts as documentation of the requirement. Fixes: 713bbb4efb9dc ("iio: pressure: ms5611: Add triggered buffer support") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Acked-by: Tomasz Duszynski Cc: Signed-off-by: Greg Kroah-Hartman

iio: pressure: zpa2326: handle pm_runtime_get_sync failure

2020-07-22T07:34:03Z

commit d88de040e1df38414fc1e4380be9d0e997ab4d58 upstream. Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count. Call pm_runtime_put if pm_runtime_get_sync fails. Signed-off-by: Navid Emamdoost Fixes: 03b262f2bbf4 ("iio:pressure: initial zpa2326 barometer support") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: bmp280: fix compensation of humidity

2020-06-24T15:48:21Z

[ Upstream commit dee2dabc0e4115b80945fe2c91603e634f4b4686 ] Limit the output of humidity compensation to the range between 0 and 100 percent. Depending on the calibration parameters of the individual sensor it happens, that a humidity above 100 percent or below 0 percent is calculated, which don't make sense in terms of relative humidity. Add a clamp to the compensation formula as described in the datasheet of the sensor in chapter 4.2.3. Although this clamp is documented, it was never in the driver of the kernel. It depends on the circumstances (calibration parameters, temperature, humidity) if one can see a value above 100 percent without the clamp. The writer of this patch was working with this type of sensor without noting this error. So it seems to be a rare event when this bug occures. Signed-off-by: Andreas Klinger Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: pressure: bmp280: Tolerate IRQ before registering

2020-06-24T15:48:17Z

[ Upstream commit 97b31a6f5fb95b1ec6575b78a7240baddba34384 ] With DEBUG_SHIRQ enabled we have a kernel crash [ 116.482696] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 116.606571] Call Trace: [ 116.609023] [ 116.611047] complete+0x34/0x50 [ 116.614206] bmp085_eoc_irq+0x9/0x10 [bmp280] because DEBUG_SHIRQ mechanism fires an IRQ before registration and drivers ought to be able to handle an interrupt happening before request_irq() returns. Fixes: aae953949651 ("iio: pressure: bmp280: add support for BMP085 EOC interrupt") Signed-off-by: Andy Shevchenko Acked-by: Linus Walleij Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

Merge tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2020-04-09T04:25:49Z

Pull chrome platform updates from Benson Leung: cros-usbpd-notify and cros_ec_typec: - Add a new notification driver that handles and dispatches USB PD related events to other drivers. - Add a Type C connector class driver for cros_ec CrOS EC: - Introduce a new cros_ec_cmd_xfer_status helper Sensors/iio: - A series from Gwendal that adds Cros EC sensor hub FIFO support Wilco EC: - Fix a build warning. - Platform data shouldn't include kernel.h Misc: - i2c api conversion complete, with i2c_new_client_device instead of i2c_new_device in chromeos_laptop. - Replace zero-length array with flexible-array member in cros_ec_chardev and wilco_ec - Update new structure for SPI transfer delays in cros_ec_spi * tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits) platform/chrome: cros_ec_spi: Wait for USECS, not NSECS iio: cros_ec: Use Hertz as unit for sampling frequency iio: cros_ec: Report hwfifo_watermark_max iio: cros_ec: Expose hwfifo_timeout iio: cros_ec: Remove pm function iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO iio: expose iio_device_set_clock iio: cros_ec: Move function description to .c file platform/chrome: cros_ec_sensorhub: Add median filter platform/chrome: cros_ec_sensorhub: Add code to spread timestmap platform/chrome: cros_ec_sensorhub: Add FIFO support platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub platform/chrome: chromeos_laptop: make I2C API conversion complete platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member platform/chrome: cros_ec_typec: Update port info from EC platform/chrome: Add Type C connector class driver platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat platform/chrome: cros_usbpd_notify: Add driver data struct ...

iio: cros_ec: Expose hwfifo_timeout

2020-03-28T21:04:33Z

Expose EC minimal interrupt period through buffer/hwfifo_timeout: - Maximal timeout is limited to 65s. - When timeout for all sensors is set to 0, EC will not send events, even if the sensor sampling rate is greater than 0. Rename frequency to sampling_frequency to match IIO ABI. Signed-off-by: Gwendal Grignou Reviewed-by: Jonathan Cameron Signed-off-by: Enric Balletbo i Serra

iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO

2020-03-28T21:04:32Z

When EC supports FIFO, each IIO device registers a callback, to put samples in the buffer when they arrives from the FIFO. When no FIFO, the user space app needs to call trigger_new, or better register a high precision timer. Signed-off-by: Gwendal Grignou Reviewed-by: Jonathan Cameron Signed-off-by: Enric Balletbo i Serra

counter: 104-quad-8: Support Filter Clock Prescaler

2020-03-08T17:28:52Z

The ACCES 104-QUAD-8 series does active filtering on the quadrature input signals via the PC/104 bus clock (OSC 14.318 MHz). This patch exposes the filter clock prescaler available on each channel. Signed-off-by: William Breathitt Gray Signed-off-by: Jonathan Cameron

iio: pressure: icp10100: add driver for InvenSense ICP-101xx

2020-03-08T17:28:52Z

InvenSense ICP-101xx sensors are a family of barometric pressure and temperature sensor. These devices are I2C only and use a specific protocol of commands/responses. Data transfer is secured by using crc8. Driver provides processed pressure and raw temperature data. Signed-off-by: Jean-Baptiste Maneyrol Signed-off-by: Jonathan Cameron

Merge tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2020-02-04T07:17:41Z

Pull chrome platform updates from Benson Leung: "CrOS EC: - Refactoring of some of cros_ec's headers: include/linux/mfd/cros_ec.h now removed, new cros_ec.h added to drivers/platform/chrome which contains shared operations of cros_ec transport drivers. - Response tracing in cros_ec_proto Wilco EC: - Fix unregistration order. - Fix keyboard backlight probing on systems without keyboard backlight - Minor cleanup (newlines in printks, COMPILE_TEST) Misc: - chromeos_laptop converted to use i2c_new_scanned_device instead of i2c_new_probed_device" * tag 'tag-chrome-platform-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec: Match implementation with headers platform/chrome: cros_ec: Drop unaligned.h include platform/chrome: wilco_ec: Allow wilco to be compiled in COMPILE_TEST platform/chrome: wilco_ec: Add newlines to printks platform/chrome: wilco_ec: Fix unregistration order cros_ec: treewide: Remove 'include/linux/mfd/cros_ec.h' platform/chrome: cros_ec_ishtp: Make init_lock static platform/chrome: chromeos_laptop: Convert to i2c_new_scanned_device platform/chrome: cros_ec_lpc: Use platform_get_irq_optional() for optional IRQs platform/chrome: cros_ec_proto: Add response tracing platform/chrome: cros_ec_trace: Match trace commands with EC commands