kernel.git/drivers/iio/pressure, branch linux-3.17.y

Merge 3.16-rc5 into staging-next

2014-07-13T22:35:56Z

We want the fixes in -rc5 in here as well. Signed-off-by: Greg Kroah-Hartman

iio: st_sensors: add devicetree probing support

2014-07-11T20:09:49Z

The I2C devices that make up the STMicroelectronics MEMS sensors may be sneakily enabled by cleverly giving the device node the same name as a string match from the platform device ID table. However the right method is to use the compatible string. On detection, the ST sensors use the ID string to probe and instatiate the right sensor driver, so pass the kernel-internal ID string in the .data field of the OF match table, and set the I2C client name to this name when a compatible match is used. This avoids having misc Linux-specific strings floating around in the device tree. Cc: Lee Jones Cc: Denis CIOCCA Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron

iio:st sensors: remove custom sampling frequence attribute in favour of core support.

2014-07-07T08:39:57Z

This allows in kernel client drivers to access this Signed-off-by: Jonathan Cameron Cc: Denis Ciocca Reviewed-by: Hartmut Knaack

iio: hid-sensor-press: Fix return values

2014-07-05T10:01:32Z

IIO_CHAN_INFO_SAMP_FREQ and IIO_CHAN_INFO_HYSTERESIS cases ignored the actual return values (which could be -EINVAL) and instead returned IIO_VAL_INT_PLUS_MICRO always. Return the actual value obtained from the functions. Both functions return IIO_VAL_INT_PLUS_MICRO upon success. Agreed with by Srinivas. Signed-off-by: Sachin Kamat Cc: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

Merge 3.16-rc2 into staging-next

2014-06-22T16:33:51Z

We want the staging fixes here as well.

Merge tag 'iio-fixes-for-3.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2014-06-18T17:41:08Z

Jonathan writes: First set of IIO fixes for the 3.16 cycle. A mixed bag of fixes, many of which feel just to late for 3.15. * hid sensors - some devices need a feature report request in order to change power state. This isn't part of the spec, but has been observed on several devices and does no harm to others. * mpl3115 has had two errors in the buffer description fixed. The presure is signed, not unsigned and the temperature has 12 bits rather than 16. These could lead to incorrect interpretation of the data in userspace. * tsl2x7x - the high byte of the proximity thresholds should be written along with the low byte (which was). This could lead to interesting results with large thresholds. * twl4030 - a flag to specify processed values were required was not set when initializing a reading. As such values returned were in an unknown state. Fixed by simply initializing it appropriately. * IIO_SIMPLE_DUMMY_BUFFER did not select IIO_BUFFER leading to randconfig build errors. * ak8975 was applying an unwanted le16_to_cpu conversion as the i2c framework already performs one. As such for big endian systems, the bytes would be in the wrong order in the magnetic field measurements reported. * mxs-lradc - the controllable voltage dividers were not enabled / disabled for later channels than the first one during conversion. * at91_adc error handling returned -ENOMEM in a u8. Return value of at91_adc_get_trigger_value_by_name changed to int thus allowing -ENOMEM and also original values to be returned. * mcb - mcb_request_mem returns and ERR_PTR but the caller was checking for NULL to detect an error.

iio: Add t5403 barometric pressure sensor driver

2014-06-14T12:15:30Z

16-bit pressure and temperature sensor the chip can do I2C and SPI, only the I2C interface is supported by the driver at the moment datasheet: http://www.epcos.com/inf/57/ds/T5400.pdf application note: http://www.epcos.com/blob/993154/download/1/t5403-applicationnote.pdf an out-of-tree driver targetting the input subsystem is at https://github.com/unixphere/t5400, it was rejected here: http://comments.gmane.org/gmane.linux.kernel.input/28107 v2: (thanks Hartmut Knaack) * fix MODE_HIGH, equals 2 * check INT_TIME mask in write_raw() Signed-off-by: Peter Meerwald Cc: Stefan Nilsson Reviewed-by: Hartmut Knaack Signed-off-by: Jonathan Cameron

iio: Fix two mpl3115 issues in measurement conversion

2014-05-29T16:38:36Z

(i) pressure is 20-bit unsigned, not signed; the buffer description is incorrect; for raw reads, this is just cosmetic (ii) temperature is 12-bit signed, not 16-bit; this affects readout of temperatures below zero as the sign bit is incorrectly processed reported via private mail Cc: stable@vger.kernel.org Signed-off-by: Peter Meerwald Reported-by: Robert Deliën Signed-off-by: Jonathan Cameron

iio: hid-sensors: Pressure: Raw read support

2014-05-05T09:59:53Z

Added support for raw reading of channel. If the sensor is powered off, it will turn on for reading value. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

iio: hid-sensors: Add API to power on/off

2014-05-05T09:59:49Z

Added an API to allow client drivers to turn ON and OFF sensors for quick read. Added data_read as counting varaible instead of boolean, so that sensor is powered off only when last user released it. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron