<feed xmlns='http://www.w3.org/2005/Atom'>
<title>kernel.git/drivers/iio/light/Makefile, branch linux-4.8.y</title>
<subtitle>Hosts the 0x221E linux distro kernel.
</subtitle>
<id>https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.8.y</id>
<link rel='self' href='https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.8.y'/>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/'/>
<updated>2016-04-24T09:06:55Z</updated>
<entry>
<title>max44000: Initial support</title>
<updated>2016-04-24T09:06:55Z</updated>
<author>
<name>Crestez Dan Leonard</name>
</author>
<published>2016-04-18T14:31:53Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=b9567e6664643eb99367fb88d14fdba863b1688a'/>
<id>urn:sha1:b9567e6664643eb99367fb88d14fdba863b1688a</id>
<content type='text'>
This just adds support for reporting illuminance with default settings.

Important default registers are written on probe because the device
otherwise lacks a reset function.

Signed-off-by: Crestez Dan Leonard &lt;leonard.crestez@intel.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: Add Vishay VEML6070 UV A light sensor driver</title>
<updated>2016-04-19T18:58:16Z</updated>
<author>
<name>Peter Meerwald-Stadler</name>
</author>
<published>2016-03-20T15:20:24Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=dfd2ab8dda719b98203f5b3e940961019d373541'/>
<id>urn:sha1:dfd2ab8dda719b98203f5b3e940961019d373541</id>
<content type='text'>
ultraviolet (UV) light sensor with I2C interface with a peak
sensitivity at 355 nm

strangely, chip uses two addresses 0x38 and 0x39 for LSB and
MSB data, resp.

datasheet: http://www.vishay.com/docs/84277/veml6070.pdf

Signed-off-by: Peter Meerwald-Stadler &lt;pmeerw@pmeerw.net&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: light: new driver for the ROHM BH1780</title>
<updated>2016-04-16T19:51:50Z</updated>
<author>
<name>Linus Walleij</name>
</author>
<published>2016-04-11T12:12:04Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=1f0477f18306c018a954e4f333690a9d0f7efc76'/>
<id>urn:sha1:1f0477f18306c018a954e4f333690a9d0f7efc76</id>
<content type='text'>
This is a reimplementation of the old misc device driver for the
ROHM BH1780 ambient light sensor (drivers/misc/bh1780gli.c).

Differences from the old driver:
- Uses the IIO framework
- Uses runtime PM to idle the hardware after 5 seconds
- No weird custom power management from userspace
- No homebrewn values in sysfs

This uses the same (undocumented) device tree compatible-string
as the old driver ("rohm,bh1780gli").

Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Cc: Daniel Mack &lt;daniel@caiaq.de&gt;
Cc: Peter Meerwald-Stadler &lt;pmeerw@pmeerw.net&gt;
Signed-off-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;
Reviewed-by: Ulf Hansson &lt;ulf.hansson@linaro.org&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: light: Add support for UPISEMI uS5182d als and proximity sensor</title>
<updated>2015-09-23T19:23:27Z</updated>
<author>
<name>Adriana Reus</name>
</author>
<published>2015-09-16T08:14:11Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=c14f8abe5304ba46b898cd381a0857fd61f87200'/>
<id>urn:sha1:c14f8abe5304ba46b898cd381a0857fd61f87200</id>
<content type='text'>
Add support for UPISEMI us5182d als and proximity sensor.
Supports raw readings.
Data sheet for this device can be found here:
http://www.upi-semi.com/temp/uS5182D-DS-P0103-temp.pdf

Signed-off-by: Adriana Reus &lt;adriana.reus@intel.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: light: add APDS9960 ALS + promixity driver</title>
<updated>2015-08-31T15:23:09Z</updated>
<author>
<name>Matt Ranostay</name>
</author>
<published>2015-08-17T17:30:16Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=aff268cd532e99ced3c8f48d01118912eb002bbf'/>
<id>urn:sha1:aff268cd532e99ced3c8f48d01118912eb002bbf</id>
<content type='text'>
APDS9960 is a combination of ALS, proximity, and gesture sensors.

This patch adds support for these functions along with gain control,
integration time, and event thresholds.

Signed-off-by: Matt Ranostay &lt;mranostay@gmail.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: light: Add support for TXC PA12 als and proximity sensor</title>
<updated>2015-07-20T17:41:21Z</updated>
<author>
<name>Adriana Reus</name>
</author>
<published>2015-07-07T11:07:13Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=8ab6abfca09c1800dccb753775f6ce8ee82f50dd'/>
<id>urn:sha1:8ab6abfca09c1800dccb753775f6ce8ee82f50dd</id>
<content type='text'>
Add support for TXC PA12203001 als and proximity sensor.
Support for raw illuminance and proximity readings.

Signed-off-by: Adriana Reus &lt;adriana.reus@intel.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: light: add support for TI's opt3001 light sensor</title>
<updated>2015-07-20T17:41:21Z</updated>
<author>
<name>Andreas Dannenberg</name>
</author>
<published>2015-07-02T22:27:58Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=94a9b7b1809f56cfaa080e70ec49b6979563a237'/>
<id>urn:sha1:94a9b7b1809f56cfaa080e70ec49b6979563a237</id>
<content type='text'>
TI's opt3001 light sensor is a simple and yet powerful
little device. The device provides 99% IR rejection,
automatic full-scale, very low power consumption and
measurements from 0.01 to 83k lux.

This patch adds support for that device using the IIO
framework.

See http://www.ti.com/product/opt3001 for more information.

Signed-off-by: Felipe Balbi &lt;balbi@ti.com&gt;
Signed-off-by: Andreas Dannenberg &lt;dannenberg@ti.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: light: Add support for ROHM RPR0521 sensor</title>
<updated>2015-06-21T14:14:54Z</updated>
<author>
<name>Daniel Baluta</name>
</author>
<published>2015-06-17T09:42:51Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=efa86e9fa82eaeee76903f131bc326af48a7cbcf'/>
<id>urn:sha1:efa86e9fa82eaeee76903f131bc326af48a7cbcf</id>
<content type='text'>
This patch adds support for ROHM RPR0521 ambient light and proximity
sensor. It offers raw readings for intensity and proximity.

Signed-off-by: Daniel Baluta &lt;daniel.baluta@intel.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: acpi: Add support for ACPI0008 Ambient Light Sensor</title>
<updated>2015-05-10T19:31:48Z</updated>
<author>
<name>Gabriele Mazzotta</name>
</author>
<published>2015-05-02T12:30:57Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=feca56ff400b7b166c86af9ff5c131d1d33cf615'/>
<id>urn:sha1:feca56ff400b7b166c86af9ff5c131d1d33cf615</id>
<content type='text'>
This driver adds the initial support for the ACPI Ambient Light Sensor
as defined in Section 9.2 of the ACPI specification (Revision 5.0) [1].

Sensors complying with the standard are exposed as ACPI devices with
ACPI0008 as hardware ID and provide standard methods by which the OS
can query properties of the ambient light environment the system is
currently operating in.

This driver currently allows only to get the current ambient light
illuminance reading through the _ALI method, but is ready to be
extended extended to handle _ALC, _ALT and _ALP as well.

[1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf

Signed-off-by: Martin Liska &lt;marxin.liska@gmail.com&gt;
Signed-off-by: Marek Vasut &lt;marex@denx.de&gt;
Signed-off-by: Gabriele Mazzotta &lt;gabriele.mzt@gmail.com&gt;
Cc: Zhang Rui &lt;rui.zhang@intel.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
<entry>
<title>iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors</title>
<updated>2015-05-10T19:31:46Z</updated>
<author>
<name>Tomasz Duszynski</name>
</author>
<published>2015-05-03T18:37:21Z</published>
<link rel='alternate' type='text/html' href='https://git.0xinfinity.dev/distro/kernel.git/commit/?id=3a11fbb037a1ecd3e1070ee484f1ea887133f21b'/>
<id>urn:sha1:3a11fbb037a1ecd3e1070ee484f1ea887133f21b</id>
<content type='text'>
Add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light
sensors.

Signed-off-by: Tomasz Duszynski &lt;tduszyns@gmail.com&gt;
Signed-off-by: Jonathan Cameron &lt;jic23@kernel.org&gt;
</content>
</entry>
</feed>
