kernel.git/drivers/iio/light/Kconfig, branch linux-5.9.y

iio: light: fix kconfig dependency bug for VCNL4035

2020-11-24T12:39:09Z

commit 44a146a44f656fc03d368c1b9248d29a128cd053 upstream. When VCNL4035 is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_TRIGGERED_BUFFER Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - VCNL4035 [=y] && IIO [=y] && I2C [=y] The reason is that VCNL4035 selects IIO_TRIGGERED_BUFFER without depending on or selecting IIO_BUFFER while IIO_TRIGGERED_BUFFER depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: Necip Fazil Yildiran Link: https://bugzilla.kernel.org/show_bug.cgi?id=209883 Link: https://lore.kernel.org/r/20201102223523.572461-1-fazilyildiran@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: vcnl4000: Add buffer support for VCNL4010/20.

2020-05-03T13:53:57Z

The VCNL4010 and VCNL4020 chips are able to raise interrupts on data ready. Use it to provide triggered buffer support for proximity data. Those two chips also provide ambient light data. However, they are sampled at different rate than proximity data. As this is not handled by the IIO framework for now, and the sample frequencies of ambient light data are very low, do add buffer support for them. Signed-off-by: Mathieu Othacehe Signed-off-by: Jonathan Cameron

Merge tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2020-04-08T02:48:52Z

Pull mfd updates from Lee Jones: "New Drivers: - Add support for IQS620A/621/622/624/625 Azoteq IQS62X Sensors New Device Support: - Add support for ADC, IRQ, Regulator, RTC and WDT to Ricoh RN5T618 PMIC - Add support for Comet Lake to Intel LPSS New Functionality: - Add support for Charger Detection to Spreadtrum SC27xx PMICs - Add support for Interrupt Polarity to Dialog Semi DA9062/61 PMIC - Add ACPI enumeration support to Diolan DLN2 USB Adaptor Fix-ups: - Device Tree; iqs62x, rn5t618, cros_ec_dev, stm32-lptimer, rohm,bd71837, rohm,bd71847 - I2C registration; rn5t618 - Kconfig; MFD_CPCAP, AB8500_CORE, MFD_WM8994, MFD_WM97xx, MFD_STPMIC1 - Use flexible-array members; omap-usb-tll, qcom-pm8xxx - Remove unnecessary casts; omap-usb-host, omap-usb-tll - Power (suspend/resume/poweroff) enhancements; rk808 - Improve error/sanity checking; dln2 - Use snprintf(); aat2870-core Bug Fixes: - Fix PCI IDs in intel-lpss-pci" * tag 'mfd-next-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (33 commits) mfd: intel-lpss: Fix Intel Elkhart Lake LPSS I2C input clock mfd: aat2870: Use scnprintf() for avoiding potential buffer overflow mfd: dln2: Allow to be enumerated via ACPI mfd: da9062: Add support for interrupt polarity defined in device tree dt-bindings: bd718x7: Yamlify and add BD71850 mfd: dln2: Fix sanity checking for endpoints mfd: intel-lpss: Add Intel Comet Lake PCH-V PCI IDs mfd: sc27xx: Add USB charger type detection support dt-bindings: mfd: Document STM32 low power timer bindings mfd: rk808: Convert RK805 to shutdown/suspend hooks mfd: rk808: Reduce shutdown duplication mfd: rk808: Stop using syscore ops mfd: rk808: Ensure suspend/resume hooks always work mfd: rk808: Always use poweroff when requested mfd: omap: Remove useless cast for driver.name mfd: Kconfig: Fix some misspelling of the word functionality mfd: pm8xxx: Replace zero-length array with flexible-array member mfd: omap-usb-tll: Replace zero-length array with flexible-array member mfd: cpcap: Fix compile if MFD_CORE is not selected mfd: cros_ec: Check DT node for usbpd-notify add ...

iio: light: Add support for Azoteq IQS621/622 ambient light sensors

2020-03-27T08:25:56Z

This patch adds support for the Azoteq IQS621 and IQS622 ambient light sensors, both of which can report a four-bit representation of ambient light intensity. The IQS621 can additionally report illuminace directly in units of lux, while the IQS622 can report a four-bit representation of infrared light intensity. Furthermore, the IQS622 can report a unitless measurement of a target's proximity to the device. Signed-off-by: Jeff LaBundy Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones

iio: light: add Dyna-Image AL3010 driver

2020-03-08T17:28:34Z

Based on: - 3320A in-kernel driver - https://www.spinics.net/lists/linux-iio/msg25145.html - https://lore.kernel.org/patchwork/patch/684179/ I decided to keep it aside of AL3320A due to different approach and much simpler design of 3010. Tested on Nexus 7 2012 (grouper/tilapia). Tested-by: David Heidelberg Tested-by: Dmitry Osipenko Tested-by: Michał Mirosław Reviewed-by: Dmitry Osipenko Signed-off-by: David Heidelberg Signed-off-by: Jonathan Cameron

iio: light: Add a driver for Sharp GP2AP002x00F

2020-02-14T12:08:19Z

This driver handles two different Sharp sensors that have been proposed for merging to the mainline kernel over the years, and already has a limited proximity-only driver in the input subsystem. These components are completely different from the confusingly similarly named Sharp GP2AP020A00F, for which we have a driver in drivers/iio/light/gp2ap020a00f.c The two components GP2AP002A00F and GP2AP002S00F are distinctively different but similar: they share the same set of registers but differ slightly in the I2C protocol. Instead of the approach by the previous input driver, we create a combined IIO proximity and light sensor driver. The plan is to merge this driver and delete the input driver. The pieces for the driver are picked all over the place after researching and grepping through a few different vendor trees and driver submissions. We merge it under the light sensors because: - It has similarities with the Capella CM3605 light sensor and proximity driver which is there. - It is related to the GP2AP020A00F driver which is also there. This driver was tested with the Samsung GT-S7710 mobile phone which has the GP2AP002S00F proximity sensor mounted. The suspend/resume cycle will disable the interrupt from the sensor. If someone would desire to use this interrupt for wakeup, the driver will need modifications. Cc: Stephan Gerhold Cc: Minkyu Kang Cc: Paweł Chmiel Cc: Jonathan Bakker Cc: Oskar Andero Cc: Dmitry Torokhov Tested-by: Jonathan Bakker Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron

iio: light: add driver for veml6030 ambient light sensor

2019-11-10T10:39:33Z

veml6030 is an ambient light sensor from Vishay semiconductors. It has 16-bit resolution, supports both ambient light measurement and white channel which is more responsive to wider wavelength spectrum. It has flexible power saving, integration time and gain options. Communication with host is over I2C. Signed-off-by: Rishi Gupta Signed-off-by: Jonathan Cameron

iio: light: Add support for ADUX1020 sensor

2019-10-15T20:11:02Z

Add initial support for Analog Devices ADUX1020 Photometric sensor. Only proximity mode has been enabled for now. Signed-off-by: Manivannan Sadhasivam Signed-off-by: Jonathan Cameron

iio: Fix an undefied reference error in noa1305_probe

2019-10-09T18:11:29Z

I hit the following error when compile the kernel. drivers/iio/light/noa1305.o: In function `noa1305_probe': noa1305.c:(.text+0x65): undefined reference to `__devm_regmap_init_i2c' make: *** [vmlinux] Error 1 Signed-off-by: zhong jiang Cc: Signed-off-by: Jonathan Cameron

iio: light: noa1305: Add support for NOA1305

2019-08-05T16:24:18Z

This driver adds the initial support for the ON Semiconductor NOA1305 Ambient Light Sensor. Originally written by Sergei Miroshnichenko. Found here: https://github.com/EmcraftSystems/linux-upstream/commit/196d6cf897e632d2cb82d45484bd7a1bfdd5b6d9 Signed-off-by: Sergei M Signed-off-by: Martyn Welch Signed-off-by: Jonathan Cameron