kernel.git/drivers/iio/light/Kconfig, branch linux-3.17.y

iio: Add driver for AMS/TAOS tcs3414 digital color sensor

2014-07-07T08:34:36Z

16-bit digital color sensor with red, green, blue and clear channel datasheet: http://ams.com/eng/content/download/250258/975997/TCS3414_Datasheet_EN_v1.pdf Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron

iio: Add Intersil isl29125 digital color light sensor driver

2014-07-07T08:06:50Z

datasheet: http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29125.pdf Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron

iio: hid-sensors: Added Proximity Sensor Driver

2014-02-22T13:07:01Z

Added usage id processing for Proximity (Human Presence). This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni Signed-off-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

iio: Add Lite-On ltr501 ambient light / proximity sensor driver

2014-01-12T18:15:40Z

combined ambient light (two channels) and proximity sensor with I2C interface; the ALS channels are visible+IR and IR datasheet is here http://optoelectronics.liteon.com/upload/download/DS86-2012-0006/P_100_LTR-501ALS-01_PrelimDS_ver1.1.pdf v3: * fix use of sizeof in _read_als() v2: (thanks to Lars-Peter Clausen) * cannot use devm_iio_device_register() due to cleanup order in _remove() * mutex around data wait/read * turn info message in _probe() into check for part number * change copyright year to 2014 Signed-off-by: Peter Meerwald Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron

iio: add Capella CM32181 ambient light sensor driver.

2014-01-01T12:03:32Z

Add Capella Microsystem CM32181 Ambient Light Sensor IIO driver. This driver will convert raw data to lux value under open-air condition. Change the calibscale based on the cover material. Signed-off-by: Kevin Tsai Signed-off-by: Jonathan Cameron

Fix build failure for gp2ap020a00f.c

2013-12-02T21:11:30Z

drivers/built-in.o: In function `gp2ap020a00f_thresh_event_handler': powercap_sys.c:(.text+0x15f90c): undefined reference to `irq_work_queue' make[1]: *** [vmlinux] Error 1 make[1]: Target `uImage' not remade because of errors. make: *** [sub-make] Error 2 make: Target `uImage' not remade because of errors. You need the IRQ work support, but GP2AP020A00F is not selecting this symbol. Signed-off-by: Russell King Signed-off-by: Jonathan Cameron

iio: Fix tcs3472 Kconfig dependencies

2013-11-09T12:15:57Z

Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron

iio: cm36651: Add CM36651 proximity/light sensor

2013-10-17T22:40:19Z

This patch adds a new driver for Capella CM36651 proximity and RGB sensor. Signed-off-by: Beomho Seo Signed-off-by: Jonathan Cameron

iio: gp2ap020a00f: Add a driver for the device

2013-09-15T10:07:49Z

Add a new driver for the ambient light/proximity sensor device. The driver exposes three channels: light_clear light_ir and proximity. It also supports triggered buffer, high and low ambient light threshold event and proximity detection events. Signed-off-by: Jacek Anaszewski Signed-off-by: Kyungmin Park Signed-off-by: Jonathan Cameron

iio: Add tcs3472 color light sensor driver

2013-09-14T20:44:29Z

chip has four 16-bit channels for red, green, blue, clear color intensity; driver supports the TCS3x7x family of devices and was tested with a TCS34725 chip; further information here: http://www.ams.com/eng/Products/Light-Sensors/Color-Sensor/TCS34725 v2 (thanks to Jonathan Cameron): * drop dynamic buffer allocation, buffer is in tcs3472_data * limit sysfs output to PAGE_SIZE * check val2 == 0 when writing CALIBSCALE Signed-off-by: Peter Meerwald Cc: Jon Brenner Signed-off-by: Jonathan Cameron