kernel.git/drivers/iio/industrialio-buffer.c, branch linux-5.19.y

iio: Replace strtobool() with kstrtobool()

2022-04-28T18:22:54Z

strtobool() is deprecated and just a wrapper around kstrtobool().Replace it with kstrtobool() so the deprecated function can be removed eventually. Suggested-by: Andy Shevchenko Signed-off-by: Lars-Peter Clausen Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220409105812.2113895-1-lars@metafoo.de Signed-off-by: Jonathan Cameron

iio: core: Move the currentmode entry to the opaque structure

2022-04-10T15:23:01Z

This entry should, under no situation, be modified by device drivers. Now that we have limited its read access to device drivers really needing it and did so through a dedicated helper, we can easily move this variable to the opaque structure in order to prevent any further modification from non-authorized code (out of the core, basically). Signed-off-by: Miquel Raynal Reviewed-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20220207143840.707510-12-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron

iio: core: Print error and fail iio_device_register() in case sample bits do not fit storage bits

2022-04-04T08:11:25Z

Add runtime check to verify whether storagebits are at least as big as shifted realbits. This should help spot broken drivers which may set realbits + shift above storagebits. Signed-off-by: Marek Vasut Cc: Daniel Baluta Reviewed-by: Nuno Sá Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220328195307.154422-1-marex@denx.de Signed-off-by: Jonathan Cameron

iio: buffer: remove usage of list iterator variable for list_for_each_entry_continue_reverse()

2022-04-04T08:11:25Z

In preparation to limit the scope of the list iterator variable to the list traversal loop, use a dedicated pointer to iterate through the list [1]. Since that variable should not be used past the loop iteration, a separate variable is used to 'remember the current location within the loop'. To either continue iterating from that position or start a new iteration (if the previous iteration was complete) list_prepare_entry() is used. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1] Signed-off-by: Jakob Koschel Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20220331230632.957634-1-jakobkoschel@gmail.com Signed-off-by: Jonathan Cameron

iio: core: fix a few code style issues

2022-04-04T08:11:23Z

* Fix indent in else statement * Remove unnecessary 'else' after 'break' * Remove space in '* attr' Signed-off-by: Alexander Vorwerk Link: https://lore.kernel.org/r/20220312180343.8935-1-alexander.vorwerk@stud.uni-goettingen.de Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2022-03-18T11:41:32Z

Jonathan writes: First set of new device support, fixes, cleanups and features for IIO in 5.18 This cycle we had quite a few series that applied similar changes to lots of drivers. To keep this description manageable I have called those out in their own section rather than per driver. Particularly pleased to see the long running AFE precision series going in this cycle. Series includes some late breaking fixes. New device support * adi,ada4250 amplifier - New driver and dt bindings for this programmable gain amplifier. * adi,admv1014 microwave down-converter - New driver, dt bindings and some device specific ABI that may be generalized as more drivers for devices similar to this are added. * adi,admv4420 K Band down-converter. - New driver and dt bindings. * adi,adxl367 accelerometer driver. - New driver, dt-bindings + some new IIO ABI definitions to support reference magnitude events where an estimate of the acceleration due to gravity has been removed. - A few fixes as follow up patches. * adi,ltc2688 DAC with toggle and dither modes. - New driver and bindings. Includes some new driver specific (for now) ABI for handling toggle mode and the addition of a dither waveform to the DAC output. * AFE (analog front end) add support for additional types of analog device in front of an ADC. - RTD temperature sensors with dt bindings. - Temperature transducers wit dt bindings. - Related cleanup and features listed in other sections below. * maxim,ds3502 potentiometer. - Add support to ds1803 driver which required significant rework. * mediatek,mt2701-auxadc driver - Add mediatek,mt8186-auxadc - id table and chip specific info only. * semtech,sx9324, semtech,ax9360 - Substantial refactoring of sx9310 to extract core logic for reuse into a separate module - New driver using this supporting sx9324 proximity sensors. - New driver using this supporting sx9360 proximity sensors. * silan,sc7a20 - Compatible with the st,lis2dh (or nearly anyway) so add ID and chip specific info to enable support. Also silan vendor ID added for dt-bindings. Staging graduation * adi,ad7280a monitoring ADC for stacked lithium-ion batteries in electric cars and similar. - Substantial rework of driver required to bring inline with current IIO best practice. An unusual device in IIO so some interesting features we may see more of in future. Multiple driver/core cleanup - Use sysfs_emit() in simple locations where there is no path to change to various core created attributes. - Trivial white space fixes around inconsistency between space after { and before } in id tables. - Introduce new handling for fractional types to avoid repeated similar implementations. Use this in 3 drivers. Note this is also targeted at future use in the AFE driver and was motivated by discussions around the precision related work on that driver. - of related header cleanups - drop of*.h and add mod_devicetable.h as appropriate. - Move a number of symbol exports into IIO_* namespaces. Two categories, 1) Library used by multiple drivers e.g. st_sensors 2) Core driver module exporting functions used by bus specific modules. A few related cleanups in this set. - Switch from CONFIG_PM_* guards to new DEFINE_SIMPLE_DEV_PM_OPS() and similar to simplify drivers and take advantage of these new macros allowing the compiler to do the job or removing unused code without the need for __maybe_unused markings. Conversion of other drivers to these new macros ongoing. Features * adi,adf4350 - Switch from of specific to generic device properties enabling use with other firmware types. * adi,adx345 - Switch from of specific to generic device properties. - Add ACPI ID ADS0345 - Related driver cleanup. * adi,hmc425a - Switch from of specific to generic device properties. * afe analog rescaler driver - Wider range of types supported for scale. - Support offset. - Kunit tests. * atlas,ezo-sensor - Convert from of to device properties. * fsl,mma8452 - Support mount matrix. * infineon,dps310: - Add ACPI ID IFX3100. * invensense,mpu6050 - Convert to generic device properties. * maxim,ds1803 - Add out_raw_available before supporting more devices. - Convert from of specific to device properties. * samsung,ssp_sensors - Convert from of specific to device properties. * st,stm32-timer trigger - Convert from of specific to device properties. * ti,hdc101x - Add ACPI ID TXNW1010. * ti,tsc2046: - Add read_raw support to enable use of iio_hwmon and similar. Fixes / cleanup. * mailmap - Update for Cai Huoqing * MAINTAINERS - Fix Analog Devices related links. - Add entry for ADRF6780 - Add entry for ADMV1013 - Add entry for AD7293 - Add entry for ADMV8818 - Update files listed for adis-lib * iio core: - Fix wrong comment about current_mode being something a driver should ever access. - Use struct_size() rather than open coding in industrialio-hw-consumer * adi,axl355 - Use units.h definitions instead of local versions. * adi,adis-lib - Simplify *updated_bits() macro - Whitespace cleanup. * afe - Note many of these fixes only apply to particular configurations so the problems have probably not been seen in the wild, but will be visible with new usecases enabled this cycle. - Fix application of consumer scale for IIO_VAL_INT. - Apply a scale of 1 when no scale is provided. - Make best effort to establish a valid offset value for fractional cases. - Use s64 for scale calculations where parameters may be signed. - Tidy up include order. - Improve accuracy for small fractional sales - Reduce risk of integer overflow. * ams,as3935 - Use devm_delayed_work_autocancel() to replace open coded equivalent. * aspeed,adc - Fix wrong use of divider flag. * atmel,sama5d2-adc - Relax atmel,trigger-edge-type to optional. - Drop Ludovic Desroches from listed maintainers of the dt-binding inline with previous MAINTAINERS entry update. * fsl,mma8452 - Fix probing when i2c_device_id used. - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. Note the original path in here worked more by luck than design. * invensense,mpu6050 - Drop ACPI_PTR() protection to avoid an unused warning. - Use fact ACPI_COMPANION() returns null when ACPI_HANDLE() does to simplify handling. * motorola,cpcap-adc - Drop unused assignment. * qcom,spmi-adc - Fix wrong example of 'reg' in binding document. * renesas,rzg2l-adc - Trivial typo fix. * semtech,sx9360 - Fix wrong register handling for event generation. * st_sensors - Allow manual disabling of I2C or SPI module if not needed for a particular board. Default is still to enable the bus specific module if appropriate bus is supported. * st,lsm6dsx - dev_get_drvdata() on the iio_dev->dev, no longer returns iio_dev. Use dev_to_iio_dev() instead. * ti,palmas-gpadc - Split the interrupt fields in the dt-binding example * ti,tsc2046 - Rework state machine to improve readability after recent debugging of an issue fixed elsewhere. - Add a sanity check to avoid very large memory allocations if a crazy delay is specified. * ti,twl6030 - Add error handling if devm_request_threaded_irq() fails. * xilinx,ams - Use devm_delayed_work_autocancel() instead of open coding equivalent. - Fix missing required clock entry in dt-binding. - Fix miss counting of channels resulting in ps channels not being enabled. - Fix incorrect values written to sequencer registers. - Fix sequence for single channel reading. * tag 'iio-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (245 commits) iio: adc: xilinx-ams: Fix single channel switching sequence iio: adc: xilinx-ams: Fixed wrong sequencer register settings iio: adc: xilinx-ams: Fixed missing PS channels dt-bindings: iio: adc: zynqmp_ams: Add clock entry iio: accel: mma8452: use the correct logic to get mma8452_data iio: adc: aspeed: Add divider flag to fix incorrect voltage reading. iio: imu: st_lsm6dsx: use dev_to_iio_dev() to get iio_dev struct dt-bindings: iio: Add ltc2688 documentation iio: ABI: add ABI file for the LTC2688 DAC iio: dac: add support for ltc2688 dt-bindings: iio: afe: add bindings for temperature transducers dt-bindings: iio: afe: add bindings for temperature-sense-rtd iio: afe: rescale: add temperature transducers iio: afe: rescale: add RTD temperature sensor support iio: test: add basic tests for the iio-rescale driver iio: afe: rescale: reduce risk of integer overflow iio: afe: rescale: fix accuracy for small fractional scales iio: afe: rescale: add offset support iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support iio: afe: rescale: expose scale processing function ...

iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL

2022-02-11T11:13:22Z

If we fail to copy the just created file descriptor to userland, we try to clean up by putting back 'fd' and freeing 'ib'. The code uses put_unused_fd() for the former which is wrong, as the file descriptor was already published by fd_install() which gets called internally by anon_inode_getfd(). This makes the error handling code leaving a half cleaned up file descriptor table around and a partially destructed 'file' object, allowing userland to play use-after-free tricks on us, by abusing the still usable fd and making the code operate on a dangling 'file->private_data' pointer. Instead of leaving the kernel in a partially corrupted state, don't attempt to explicitly clean up and leave this to the process exit path that'll release any still valid fds, including the one created by the previous call to anon_inode_getfd(). Simply return -EFAULT to indicate the error. Fixes: f73f7f4da581 ("iio: buffer: add ioctl() to support opening extra buffers for IIO device") Cc: stable@kernel.org Cc: Jonathan Cameron Cc: Alexandru Ardelean Cc: Lars-Peter Clausen Cc: Nuno Sa Reported-by: Dan Carpenter Signed-off-by: Mathias Krause Reviewed-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: core: Use sysfs_emit()

2022-01-23T18:03:36Z

sysfs_emit() is preferred over raw s*printf() for sysfs attributes since it knows about the sysfs buffer specifics and has some built-in checks for size and alignment. This patch converts the places in the IIO core that follow the pattern of return s*printf(...) to return sysfs_emit(...) This covers the new places that have been introduced where sprintf() is used for formatting sysfs output since the last time this was done in commit 83ca56b663cf ("iio: core: Use sysfs_emit() (trivial bits)"). Signed-off-by: Lars-Peter Clausen Link: https://lore.kernel.org/r/20211216185217.1054495-2-lars@metafoo.de Signed-off-by: Jonathan Cameron

iio: buffer: Use dedicated variable in iio_buffers_alloc_sysfs_and_mask()

2021-11-20T14:17:22Z

Use dedicated variable for index in the loop in the iio_buffers_alloc_sysfs_and_mask(). This will make code cleaner and less error prone as proved by previous changes done in this function. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20211013094923.2473-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2021-10-24T11:09:37Z

Jonathan writes: 2nd set of IIO new driver, cleanups and features for the 5.16 cycle New device support * adrf6780 microwave upconverter. - New driver for this interesting device including bindings. Features * lite-on ltr501 - Add dt-bindings including vendor ID and of_device_id table. - Add regulator support. * sensiron,scd4x - Add reporting of channel scale. Cleanups including fixes for things in this cycle * Tree wide: Another set of dev_err_probe() introductions to reduce noise in logs when deferred probing is needed and provide more debug info. Devices included this time: - amlogic,meson_saradc - capella,cm3605 - fsl,imx7d - maxim,max1118 - maxim,max1241 - nxp,lpc18xx - qcom,pm8xxxx-xoadc - rockchip,saradc - sharp,gp2ap002 - sterricson,ab8500 - ti,ads7950 * core - iio:buffer - Fix a path where a ret value is not intialized. * channel-mux - Add support to mux core subsystem for a settling delay and use it in the iio-channel-mux driver. - Fix a few dt binding warnings. * nxp,lpc18xx - Convert to devm_ functions for all of probe and drop remove() * st,lsm6dsx - Suppress a warning due to lack of handling of an enum *_MAX entry that is just there to get the size. * st,stm32-adc - Add generic channel binding, deprecating the old approach. - Add nvmem support to get calibration data for the vrefint channel and use it to perform such calibration. - Add a binding for sample-time to the generic channel description as it can be per channel. * ti,adc128s052 - Use devm_ managed functions and drop remove() * vti,sca3000 - Use sign_extend32() rather than opencoding. * xilinx,xadc - Drop irq field from state structure as now just used in probe. * tag 'iio-for-5.16b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (36 commits) dt-bindings: iio: frequency: add adrf6780 doc iio: frequency: adrf6780: add support for ADRF6780 iio: chemical: scd4x: Add a scale for the co2 concentration reading dt-bindings: iio: io-channel-mux: allow duplicate channel, labels dt-bindings: iio: io-channel-mux: add optional #io-channel-cells iio: adc: adc128s052: Simplify adc128_probe() iio: multiplexer: iio-mux: Support settle-time-us property dt-bindings: iio: io-channel-mux: Add property for settle time mux: add support for delay after muxing iio: adc: stm32-adc: use generic binding for sample-time iio: adc: stm32-adc: add vrefint calibration support iio: adc: stm32-adc: add support of internal channels iio: adc: stm32-adc: add support of generic channels binding iio: adc: stm32-adc: split channel init into several routines dt-bindings: iio: stm32-adc: add nvmem support for vrefint internal channel dt-bindings: iio: stm32-adc: add generic channel binding iio: accel: sca3000: Use sign_extend32() instead of opencoding sign extension. iio: xilinx-xadc: Remove `irq` field from state struct iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr() iio: light: gp2ap002: Make use of the helper function dev_err_probe() ...