kernel.git/drivers/iio/industrialio-buffer.c, branch linux-5.1.y

iio: Fix scan mask selection

2019-03-09T16:55:06Z

The trialmask is expected to have all bits set to 0 after allocation. Currently kmalloc_array() is used which does not zero the memory and so random bits are set. This results in random channels being enabled when they shouldn't. Replace kmalloc_array() with kcalloc() which has the same interface but zeros the memory. Note the fix is actually required earlier than the below fixes tag, but will require a manual backport due to move from kmalloc to kmalloc_array. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Fixes commit 057ac1acdfc4 ("iio: Use kmalloc_array() in iio_scan_mask_set()"). Cc: Signed-off-by: Jonathan Cameron

Merge tag 'iio-fixes-for-4.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2018-02-20T09:03:22Z

Jonathan writes: First round of IIO fixes for the 4.16 cycle. One nasty very old crash around polling for buffers that aren't there - though that can only cause effects on drivers that support events but not buffers. * buffer / kfifo handling in the core. - Check there is a buffer and return 0 from poll directly if there isn't. Poll doesn't make sense in this circumstances, but best to close the hole. * ad5933 - Change the marked buffer mode to a software buffer as the meaning of the hardware buffer label has long since changed and this uses a front end software buffer anyway. * ad7192 - Fix the fact the external clock frequency was only set when using the internal clock which was less than helpful. * adis_lib - Initialize the trigger before requesting the interrupt. Some newer parts can power up with interrupt generation enabled so ordering now matters. * aspeed-adc - Fix an errror handling path as labels and general ordering were wrong. * srf08 - Fix a link error due to undefined devm_iio_triggered_buffer_setup. * stm32-adc - Fix error handling unwind squence in stm32h7_adc_enable.

iio: buffer: check if a buffer has been set up when poll is called

2018-02-17T16:54:58Z

If no iio buffer has been set up and poll is called return 0. Without this check there will be a null pointer dereference when calling poll on a iio driver without an iio buffer. Cc: stable@vger.kernel.org Signed-off-by: Stefan Windfeldt-Prytz Signed-off-by: Jonathan Cameron

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03Z

This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^$[^\"]*$$\$/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro Signed-off-by: Linus Torvalds

Merge tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2018-02-01T17:51:57Z

Pull staging/IIO updates from Greg KH: "Here is the big Staging and IIO driver patches for 4.16-rc1. There is the normal amount of new IIO drivers added, like all releases. The networking IPX and the ncpfs filesystem are moved into the staging tree, as they are on their way out of the kernel due to lack of use anymore. The visorbus subsystem finall has started moving out of the staging tree to the "real" part of the kernel, and the most and fsl-mc codebases are almost ready to move out, that will probably happen for 4.17-rc1 if all goes well. Other than that, there is a bunch of license header cleanups in the tree, along with the normal amount of coding style churn that we all know and love for this codebase. I also got frustrated at the Meltdown/Spectre mess and took it out on the dgnc tty driver, deleting huge chunks of it that were never even being used. Full details of everything is in the shortlog. All of these patches have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (627 commits) staging: rtlwifi: remove redundant initialization of 'cfg_cmd' staging: rtl8723bs: remove a couple of redundant initializations staging: comedi: reformat lines to 80 chars or less staging: lustre: separate a connection destroy from free struct kib_conn Staging: rtl8723bs: Use !x instead of NULL comparison Staging: rtl8723bs: Remove dead code Staging: rtl8723bs: Change names to conform to the kernel code staging: ccree: Fix missing blank line after declaration staging: rtl8188eu: remove redundant initialization of 'pwrcfgcmd' staging: rtlwifi: remove unused RTLHALMAC_ST and RTLPHYDM_ST staging: fbtft: remove unused FB_TFT_SSD1325 kconfig staging: comedi: dt2811: remove redundant initialization of 'ns' staging: wilc1000: fix alignments to match open parenthesis staging: wilc1000: removed unnecessary defined enums typedef staging: wilc1000: remove unnecessary use of parentheses staging: rtl8192u: remove redundant initialization of 'timeout' staging: sm750fb: fix CamelCase for dispSet var staging: lustre: lnet/selftest: fix compile error on UP build staging: rtl8723bs: hal_com_phycfg: Remove unneeded semicolons staging: rts5208: Fix "seg_no" calculation in reset_ms_card() ...

iio: buffer: Expose data available

2018-01-08T15:03:41Z

Add a sysfs attribute that exposes buffer data available to userspace. This attribute can be checked at runtime to determine the overall buffer fill level (across all allocated buffers). Signed-off-by: Matt Fornero Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

the rest of drivers/*: annotate ->poll() instances

2017-11-28T16:06:58Z

Signed-off-by: Al Viro

sched/headers: Prepare to move signal wakeup & sigpending methods from into

2017-03-02T07:42:32Z

Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

iio:buffer.h - split into buffer.h and buffer_impl.h

2017-01-10T19:54:55Z

buffer.h supplies everything needed for devices using buffers. buffer_impl.h supplies access to the internals as needed to write a buffer implementation. This was really motivated by the mess that turned up in the kernel-doc documentation pulled in by the new sphinx docs. It made it clear that our logical separations in headers were generally terrible. The buffer case was easy to sort out without greatly effecting drivers so here it is. Signed-off-by: Jonathan Cameron Reviewed-by: Lars-Peter Clausen

iio:buffer: Push implementation of iio_device_attach_buffer into .c file

2017-01-10T19:54:54Z

This is a precursor to the splitting of buffer.h into parts relevant to buffer implementation vs those for devices using buffers. struct buffer is about to become opaque as far as the header is concerned. Signed-off-by: Jonathan Cameron Reviewed-by: Lars-Peter Clausen