kernel.git/drivers/iio/imu, branch linux-4.15.y

iio: imu: st_lsm6dsx: introduce conf_lock mutex

2018-03-28T16:23:04Z

commit 335eaedce461c9092e133ce0c6247f5a0b0baf69 upstream. Add conf_lock mutex to prevent concurrent FIFO configuration update Fixes: 290a6ce11d93 (iio: imu: add support to lsm6dsx driver) Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: imu: st_lsm6dsx: fix endianness in st_lsm6dsx_read_oneshot()

2018-03-28T16:23:04Z

commit 7b9ebe428266fb7e0a6d769bb3ff3fcb6044b15e upstream. Apply le16_to_cpu() to data read from the sensor in order to take into account architecture endianness Fixes: 290a6ce11d93 (iio: imu: add support to lsm6dsx driver) Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adis_lib: Initialize trigger before requesting interrupt

2018-02-28T09:21:34Z

commit f027e0b3a774e10302207e91d304bbf99e3a8b36 upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [] lr : [] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [] (iio_trigger_notify_done) from [] (__handle_irq_event_percpu+0x88/0x118) [] (__handle_irq_event_percpu) from [] (handle_irq_event_percpu+0x1c/0x58) [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [] (handle_irq_event) from [] (handle_level_irq+0xa4/0x130) [] (handle_level_irq) from [] (generic_handle_irq+0x24/0x34) [] (generic_handle_irq) from [] (zynq_gpio_irqhandler+0xb8/0x13c) [] (zynq_gpio_irqhandler) from [] (generic_handle_irq+0x24/0x34) [] (generic_handle_irq) from [] (__handle_domain_irq+0x5c/0xb4) [] (__handle_domain_irq) from [] (gic_handle_irq+0x48/0x8c) [] (gic_handle_irq) from [] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz Signed-off-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2017-11-14T04:53:28Z

Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

iio: imu: st_lsm6dsx: add FIFO ops data structure

2017-10-09T19:51:01Z

Introduce FIFO ops data structure to contain FIFO related parameters in order to properly support more devices in st_lsm6dsx driver Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron

iio: imu: st_lsm6dsx: move decimator info in st_lsm6dsx_sensor_settings

2017-10-09T19:51:01Z

Move FIFO decimator info in st_lsm6dsx_sensor_settings list since decimator registers are exported in register map just in lsm6ds3/lsm6ds3h/lsm6dsl/lsm6dsm sensors and not in other compliant devices Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron

iio: imu: st_lsm6dsx: split fifo mode and fifo odr configuration

2017-10-09T19:50:57Z

Separate fifo mode and max fifo sample rate configuration. That change will be necessary to reuse st_lsm6dsx_set_fifo_mode() routine and to support more devices in st_lsm6dsx driver Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron

iio: imu: st_lsm6dsx: convert max_fifo_size in FIFO sample size

2017-10-09T19:50:52Z

Express max fifo depth in ST_LSM6DSX_SAMPLE_SIZE instead of in bytes. That change will be necessary to properly support more devices in st_lsm6dsx driver Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-4.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-09-25T10:56:37Z

Jonathan writes: Round one of new device support, features and cleanup for IIO in the 4.15 cycle. Note there is a misc driver drop in here given we have support in IIO and the feeling is no one will care. A large part of this series is a boiler plate removal series avoiding the need to explicitly provide THIS_MODULE in various locations. It's very dull but touches all drivers. New device support * ad5446 - add ids to support compatible parts DAC081S101, DAC101S101, DAC121S101. - add the dac7512 id and drop the misc driver as feeling is no one is using it (was introduced for a board that is long obsolete) * mt6577 - add bindings for mt2712 which is fully compatible with other supported parts. * st_pressure - add support for LPS33HW and LPS35HW with bindings (ids mostly). New features * ccs811 - Add support for the data ready trigger. * mma8452 - remove artifical restriction on supporting multiple event types at the same time. * tcs3472 - support out of threshold events Core and tree wide cleanup * Use macro magic to remove the need to provide THIS_MODULE as part of struct iio_info or struct iio_trigger_ops. This is similar to work done in a number of other subsystems (e.g. i2c, spi). All drivers are fixed and then the fields in these structures are removed. This will cause build failures for out of tree drivers and any new drivers that cross with this work going into the kernel. Note mostly done with a coccinelle patch, included in the series on the mailing list but not merged as the fields no longer exist in the structures so the any hold outs will cause a build failure. Cleanups * ads1015 - avoid writing config register when it doesn't change. - add 10% to conversion wait time as it seems it is sometimes a little small. * ade7753 - replace use of core mlock with a local lock. This is part of a long term effort to make the use of mlock opaque and single purpose. * ade7759 - expand the use of buf_lock to cover previous mlock cases. This is a slightly nicer solution to the same issue as in ade7753. * cros_ec - drop an unused variable * inv_mpu6050 - add a missing break in a switch for consistency - not actual bug, - make some local arrays static to save on object code size. * max5481 - drop manual setting of the spi module owner as handled by the spi core. * max5487 - drop manual setting of the spi module owner as handled by the spi core. * max9611 - drop explicit setting of the i2c module owner as handled by the i2c core. * mcp320x - speed up reads on single channel devices, - drop unused of_device_id data elements, - document the struct mcp320x, - improve binding docs to reflect restrictions on spi setup and to make it explicit that the reference regulator is needed. * mma8452 - symbolic to octal permissions, - unsigned to unsigned int. * st_lsm6dsx - avoid setting odr values multiple times, - drop config of LIR as it is only ever set to the existing defaults, - drop rounding configuration as it only ever matches the defaults. * ti-ads8688 - drop manual setting of the spi module owner as handled by the spi core. * tsl2x7x - constify the i2c_device_id, - cleanup limit checks to avoid static checker warnings (and generally have nicer code).