kernel.git/drivers/iio/humidity, branch linux-6.9.y

iio: humidity: hdc3020: fix hysteresis representation

2024-07-05T07:38:07Z

commit 9547d6a4c65e975e40e203900322342ef7379c52 upstream. According to the ABI docs hysteresis values are represented as offsets to threshold values. Current implementation represents hysteresis values as absolute values which is wrong. Nevertheless the device stores them as absolute values and the datasheet refers to them as clear thresholds. Fix the reading and writing of hysteresis values by including thresholds into calculations. Hysteresis values that result in threshold clear values that are out of limits will be truncated. To check that the threshold clear values are correct, registers are read out using i2ctransfer and the corresponding temperature and relative humidity thresholds are calculated using the formulas in the datasheet. Fixes: 3ad0e7e5f0cb ("iio: humidity: hdc3020: add threshold events support") Signed-off-by: Dimitri Fedrau Reviewed-by: Javier Carrasco Link: https://lore.kernel.org/r/20240605192136.38146-1-dima.fedrau@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2024-02-25T13:11:41Z

Jonathan writes: IIO: 1st set of new device support, features and cleanup for 6.9 IIO Backend support =================== New approach from Nuno Sa to the problem of reuse of drivers with IIO devices that are actually the combination of a highspeed chip and an FPGA core handling the data capture and flows. It will hopefully also apply to some other split designs. The ad9467 and axi-adi drivers are converted over to this framework. New device support ================== adi,admfm2000 - New driver for this dual microwave down converter. ams,as73211 - Add support for as7331 UV sensor. richtek,rtq6056 - Add support for related parts RTQ6053 and RTQ6059 st,lsm6dsx - Add ASM330LHHXG1 accelerometer and gyro support (mainly IDs) ti,ads1298 - New driver for this medical ADC. Features ======== tests - Unit tests for the gain-time-scale helper library. bosch,bmi088 - I2C support. bosh,bmi160 - Add 10EC5280 ACPI ID. Used in a number of devices that won't get fixed. The ID is actually a PCI ID belonging to realtech. No response was received to earlier attempts to notify them of this. The manufacturers of some devices have replied to say they will not fix this incorrect ID. Add the ID and hope it isn't a problem. bosch,bmi323 - Add BOSC0200 ACPI ID. Note this is a duplicate of one in the bmc150 driver (it appears these parts share a windows driver). Both drivers perform an ID check that is safe on the other part before successfully probing. hid-sensors-als - Add color temperature and chromaticity support. Note this is a replacement for the series reverted in 6.8 that correctly handles all the potential channel combinations. honeywell,hsc030pa - Triggered buffer support (after driver cleanup). honeywell,mprls00025pa - Improved error handling. - New DT binding to allow use of part number triplet as provided in data sheet to specify equivalent of most of the binding more efficiently. - SPI support. memsic,mxc4005 - ACPI ID MDA6655 as seen in the Chuwi Minibook X 2023 ti,hdc3020 - Add threshold event support (after some driver cleanup) veml,vcnl4000 - Switch to high resolution proximity measurement. Cleanup ======= Various minor typo fixes and better use of defines etc. Treewide - Stop using ACPI_PTR(). The savings in space are small and not worth the complexity of __maybe_unused of ifdef guards. To avoid use in new IIO drivers based on copy and paste, clean it out. - cleanup.h based handling of iio_device_claim_direct_mode()/ iio_device_release_direct_mode() using scope_cond_guard(). In many drivers this is combined with other automated cleanup to give maximum simplifications. An initial set of drivers are converted over to this infrastructure. Tools - Use rewinddir() instead of seekdir() to return to start of file. core - Make iio_bus_type constant. adi,ad16475 - Use irq_get_trigger_type() instead of opencoding. adi,ad16480 - Use irq_get_trigger_type() instead of opencoding. adi,ad-sigma-delta - Avoid overwriting IRQ flags if provided by firmware. ams,as73211 - Use IIO_VAL_FRACTIONAL for scales to simplify the code and potentially improve accuracy. gts-library - Use a div64_u64() instead of a loop to do a division. honeywell,mprls00025pa - Clean up dt-binding doc. - Drop defaults when DT binding not providing values. Very unlikely these were useful given they were wrong for vast majority of supported devices. - Whitespace cleanup miramems,da280 - Use i2c_get_match_data() to replace hand rolled ACPI matching code. semtech,sx9324 - Avoid unnecessary copying of property strings. st,lsm6dsx - Improve docs, particularly wrt to making addition of new device support less noisy. st,lsm9ds0 - Use dev_err_probe() in all probe() error handling. - Improved header includes. - Tidy up termination of ID tables. ti,ads1014 - Correct upper bound on PGA (wrong value had no actual impact) ti,afe4403/4404 - devm_ useage to simplify error handling in probe() and allow() remove to be dropped. voltage-divider - Add dt-binding for io-channel-cells to allow such a device to be both an IIO consumer and IIO producer at the same time. * tag 'iio-for-6.9a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (106 commits) iio: imu: bmi323: Add ACPI Match Table iio: accel: bmc150: Document duplicate ACPI entries with bmi323 driver iio: adc: ti-ads1298: Add driver dt-bindings: iio: adc: ti-ads1298: Add bindings iio: pressure: hsc030pa add triggered buffer iio: pressure: hsc030pa add mandatory delay iio: pressure: hsc030pa: update datasheet URLs iio: pressure: hsc030pa: include cleanup iio: pressure: hsc030pa: use signed type to hold div_64() result dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props iio: st_sensors: lsm9ds0: Use common style for terminator in ID tables iio: st_sensors: lsm9ds0: Don't use "proxy" headers iio: st_sensors: lsm9ds0: Use dev_err_probe() everywhere iio: adc: adi-axi-adc: move to backend framework iio: adc: ad9467: convert to backend framework iio: add the IIO backend framework iio: buffer-dmaengine: export buffer alloc and free functions of: property: add device link support for io-backends dt-bindings: adc: axi-adc: update bindings for backend framework dt-bindings: adc: ad9467: add new io-backend property ...

iio: humidity: hdc3020: add threshold events support

2024-02-17T16:16:12Z

Add threshold events support for temperature and relative humidity. To enable them the higher and lower threshold registers must be programmed and the higher threshold must be greater then or equal to the lower threshold. Otherwise the event is disabled. Invalid hysteresis values are ignored by the device. There is no further configuration possible. Tested by setting thresholds/hysteresis and turning the heater on/off. Used iio_event_monitor in tools/iio to catch events while constantly displaying temperature and humidity values. Signed-off-by: Dimitri Fedrau Tested-by: Javier Carrasco Link: https://lore.kernel.org/r/20240214085350.19382-4-dima.fedrau@gmail.com Signed-off-by: Jonathan Cameron

iio: humidity: hdc3020: switch to 16bit register defines

2024-02-17T16:16:12Z

Switch to 16bit register defines and drop the const u8 register pairs. By doing so we change the parameter of functions for reading and writing to the device. Additionally create helper functions that are aware of the new register format and apply them wherever possible. Signed-off-by: Dimitri Fedrau Link: https://lore.kernel.org/r/20240214085350.19382-2-dima.fedrau@gmail.com Signed-off-by: Jonathan Cameron

iio: humidity: hdc3020: fix temperature offset

2024-01-27T14:40:07Z

The temperature offset should be negative according to the datasheet. Adding a minus to the existing offset results in correct temperature calculations. Fixes: c9180b8e39be ("iio: humidity: Add driver for ti HDC302x humidity sensors") Reviewed-by: Nuno Sa Signed-off-by: Dimitri Fedrau Link: https://lore.kernel.org/r/20240126135226.3977904-1-dima.fedrau@gmail.com Signed-off-by: Jonathan Cameron

iio: humidity: hts221: Drop ACPI_PTR() usage

2024-01-23T22:06:55Z

Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20231231183514.566609-11-jic23@kernel.org Signed-off-by: Jonathan Cameron

iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry

2024-01-22T18:59:07Z

Something when wrong when applying the original patch and only the c file made it in. Here the rest of the changes are applied. Fixes: c9180b8e39be ("iio: humidity: Add driver for ti HDC302x humidity sensors") Reported-by: Lars-Peter Clausen Cc: Javier Carrasco Cc: Li peiyu <579lpy@gmail.com> Signed-off-by: Jonathan Cameron Reviewed-by: Lars-Peter Clausen

iio: humidity: Add driver for ti HDC302x humidity sensors

2023-12-11T19:38:36Z

Add support for HDC302x integrated capacitive based relative humidity (RH) and temperature sensor. This driver supports reading values, reading the maximum and minimum of values and controlling the integrated heater of the sensor. Co-developed-by: Javier Carrasco Signed-off-by: Javier Carrasco Signed-off-by: Li peiyu <579lpy@gmail.com> Link: https://lore.kernel.org/r/20231211122940.9791-1-579lpy@gmail.com Signed-off-by: Jonathan Cameron

iio: si7005: Add device tree support

2023-10-14T16:12:21Z

This device supports ACPI detection but lacks of the device tree counterpart. Add device tree support. Signed-off-by: Javier Carrasco Link: https://lore.kernel.org/r/20231012-topic-si7005_devicetree-v1-1-6c8a6fa7b3ec@gmail.com Signed-off-by: Jonathan Cameron

iio: humidity: hid-sensor-humidity: Convert to platform remove callback returning void

2023-09-23T14:06:55Z

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230919174931.1417681-36-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron