kernel.git/drivers/iio/dac, branch linux-4.13.y

Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-05-29T13:53:42Z

Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.13 cycle Two entirely new drivers in here plus the usual range of cleanups and features. New device support * ad5064 - add ltc2631, ltc2633 and ltc2635 support. * bma180 - trivial support for bma250e (new id) * hid-sensor-rotation - add relative orientation and geometric orientation support. * isl29028 - add isl29030 support (its effectively the same part from a driver point of view) * maxim_thermocouple - add max31856 id. * meson-saradc - add meson8b SoC adc support. * ti-adc084s021 - new driver and bindings. * ti-adc108s102 - new driver and bindings. Staging graduations * isl29028 Features * bma180 - ACPI enumeration for BMA250E which is used in various x86 tablets. * hi8453 - add raw access rather than only events. * hid-sensor-hub - Implement batch mode in which we can set a threshold on the amount of time between data coming from the fifos. This is the first device to do this rather than use a watershed on the number of samples. * hts221 - power management support * lsm6dsx - add system power management support. * rpr0521 - sampling frequency read / write * stm32-trigger - add support for TRG02 triggers. * tsl2583 - runtime power management support. Cleanups * core - inkern: fix a double unlock in iio_read_available_channel_raw when raw value doesn't appear to be raw (error path). - fixup accidental sizeof pointer in iio_device_add_mask_type. * docs - fix an accidental duplicated line in sysfs-bus-iio-meas-spec. * tools - use local include/uapi headers to ensure always up to date. - increase length of allowed trigger names. * ad9834 - symbolic to octal permissions. * ade7753 - symbolic to octal permissions. - fix indentation * ade7754 - symbolic to octal permissions. * ade7758 - symbolic to octal permissions. - ade7854 - symbolic to octal permissions. * as3935 - move out of storm check to given consistent results for raw and processed values. * bmp280 - fix bme280 naming in Kconfig help. * hi8435 - avoid garbage on event after enable. - add missing in_voltage_sensing_mode_available to list possible enum options. - handle the reset gpio with the obvious polarity rather than relying on DT to provide it correctly. * hid-sensors - fix a wrong error path scrubbing of return values. * hid-sensors-accel - drop static on a local variable * hid-sensors-rotation - Add missing scale and offset property parsing support. * ina2xx - Fix a bad use of GENMASK and some typos and whitespace issues. * isl29018 - only declare the ACPI table when ACPI is enabled. * isl29028 - fix proximity sleep times. * lsm6dsx - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of dealing with the various PM config variables. * meson-saradc - mark meson_sar_adc_data static and const. * rcar-gyroadc - derive the interface clock speed from the fck clock on the basis they are the same actual clock. - drop the now unused if clock from the bindings. * rpr0521 - disable sensor when marked as such rather than always enabling it. - poweroff if probe fails and we can talk to device. - make sure device powered off when it doesn't need to be on. - use sizeof rather than hardcoded size on value read. - whitespace fixup. - reorder channel numbers ready for buffered support which didn't quite make this pull request. * st-accel - fix platform data initialization to allow remove and reprobe. * st-pressure - fix platform data initialization to allow remove and reprobe. * tsl2x7x - S_IRUGO, S_IWUSR to octal values - rename driver for consistency with more recent drivers - drop FSF mailing address - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and relevant function renames. * zpa2326 - report an error for consistency with other error paths.

iio:ad5064: Add support for ltc2633 and similar devices

2017-05-14T15:16:57Z

The Linear Technology LTC2631, LTC2633 and LTC2635 are very similar to the AD5064 device, in particular the LTC2627. This patch adds support for those devices. Only the LTC2633 has been tested, which is the 2-channel variant. The LTC2631 is the 1-channel, and the LTC2635 the 4-channel version. The actual DAC resolution depends on the exact chip type and can be 12, 10 or 8 bits, using the upper bits so this has no effect on the register map. The internal reference is set to 2.5V on "L" versions, and it's 4.096V for "H" versions. Datasheets: LTC2631: http://www.linear.com/docs/26553 LTC2633: http://www.linear.com/docs/39529 LTC2635: http://www.linear.com/docs/28754 Signed-off-by: Mike Looijmans Reviewed-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron

Merge tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

2017-05-11T02:13:03Z

Pull hw lockdown support from David Howells: "Annotation of module parameters that configure hardware resources including ioports, iomem addresses, irq lines and dma channels. This allows a future patch to prohibit the use of such module parameters to prevent that hardware from being abused to gain access to the running kernel image as part of locking the kernel down under UEFI secure boot conditions. Annotations are made by changing: module_param(n, t, p) module_param_named(n, v, t, p) module_param_array(n, t, m, p) to: module_param_hw(n, t, hwtype, p) module_param_hw_named(n, v, t, hwtype, p) module_param_hw_array(n, t, hwtype, m, p) where the module parameter refers to a hardware setting hwtype specifies the type of the resource being configured. This can be one of: ioport Module parameter configures an I/O port iomem Module parameter configures an I/O mem address ioport_or_iomem Module parameter could be either (runtime set) irq Module parameter configures an I/O port dma Module parameter configures a DMA channel dma_addr Module parameter configures a DMA buffer address other Module parameter configures some other value Note that the hwtype is compile checked, but not currently stored (the lockdown code probably won't require it). It is, however, there for future use. A bonus is that the hwtype can also be used for grepping. The intention is for the kernel to ignore or reject attempts to set annotated module parameters if lockdown is enabled. This applies to options passed on the boot command line, passed to insmod/modprobe or direct twiddling in /sys/module/ parameter files. The module initialisation then needs to handle the parameter not being set, by (1) giving an error, (2) probing for a value or (3) using a reasonable default. What I can't do is just reject a module out of hand because it may take a hardware setting in the module parameters. Some important modules, some ipmi stuff for instance, both probe for hardware and allow hardware to be manually specified; if the driver is aborts with any error, you don't get any ipmi hardware. Further, trying to do this entirely in the module initialisation code doesn't protect against sysfs twiddling. [!] Note that in and of itself, this series of patches should have no effect on the the size of the kernel or code execution - that is left to a patch in the next series to effect. It does mark annotated kernel parameters with a KERNEL_PARAM_FL_HWPARAM flag in an already existing field" * tag 'hwparam-20170420' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (38 commits) Annotate hardware config module parameters in sound/pci/ Annotate hardware config module parameters in sound/oss/ Annotate hardware config module parameters in sound/isa/ Annotate hardware config module parameters in sound/drivers/ Annotate hardware config module parameters in fs/pstore/ Annotate hardware config module parameters in drivers/watchdog/ Annotate hardware config module parameters in drivers/video/ Annotate hardware config module parameters in drivers/tty/ Annotate hardware config module parameters in drivers/staging/vme/ Annotate hardware config module parameters in drivers/staging/speakup/ Annotate hardware config module parameters in drivers/staging/media/ Annotate hardware config module parameters in drivers/scsi/ Annotate hardware config module parameters in drivers/pcmcia/ Annotate hardware config module parameters in drivers/pci/hotplug/ Annotate hardware config module parameters in drivers/parport/ Annotate hardware config module parameters in drivers/net/wireless/ Annotate hardware config module parameters in drivers/net/wan/ Annotate hardware config module parameters in drivers/net/irda/ Annotate hardware config module parameters in drivers/net/hamradio/ Annotate hardware config module parameters in drivers/net/ethernet/ ...

Annotate hardware config module parameters in drivers/iio/

2017-04-20T11:02:32Z

When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/iio/. Suggested-by: Alan Cox Signed-off-by: David Howells Acked-by: William Breathitt Gray Acked-by: Jonathan Cameron cc: linux-iio@vger.kernel.org

Merge tag 'iio-fixes-for-4.11e' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2017-04-18T17:38:38Z

Jonathan writes: Fifth set of IIO fixes for the 4.11 cycle. As these are rather late in the cycle, they may sneak over into 4.12. There is a fix for a regression caused by another fix (hid sensors hardware seems to vary a lot in how various corner cases are handled). * ad7303 - fix channel description. Numeric values were being passed as characters presumably leading to garbage from the userspace interface. * as3935 - the write data macro was wrong so fix it. * bmp280 - incorrect handling of negative values as being unsigned broke humidity calculation. * hid-sensor - Restore the poll and hysteresis values after resume as some hardware doesn't do it. * stm32-trigger - buglet in reading the sampling frequency

iio: dac: add support for stm32 DAC

2017-04-14T15:36:16Z

Add support for STMicroelectronics STM32 DAC. It's a 12-bit, voltage output digital-to-analog converter. It has two output channels, each with its own converter. It supports 8 bits or 12bits left/right aligned data format. Only 12bits right-aligned is used here. It has built-in noise or triangle waveform generator, and supports external triggers for conversions. Each channel can be used independently, with separate trigger, then separate IIO devices are used to handle this. Core driver is intended to share common resources such as clock, reset, reference voltage and registers. Signed-off-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron

iio: dac: ad7303: fix channel description

2017-04-14T13:44:29Z

realbits, storagebits and shift should be numbers, not ASCII characters. Signed-off-by: Pavel Roskin Reviewed-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron

iio: dac: ad5504: Remove unnecessary cast on void pointer

2017-04-02T08:48:50Z

The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by: simran singhal Signed-off-by: Jonathan Cameron

iio: dac: ad5504: constify attribute_group structures

2017-03-29T21:08:51Z

Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; File size before: text data bss dec hex filename 3046 360 0 3406 d4e drivers/iio/dac/ad5504.o File size after: text data bss dec hex filename 3110 296 0 3406 d4e drivers/iio/dac/ad5504.o Signed-off-by: simran singhal Signed-off-by: Jonathan Cameron

iio: dac: Add support for ltc2632 DACs

2017-03-21T18:43:56Z

Add support for Linear Technology LTC2632 (SPI) family of· dual 12- 10-, and 8-bits output DACs. Signed-off-by: Maxime Roussin-Belanger Signed-off-by: Jean-Francois Dagenais Signed-off-by: Jonathan Cameron