kernel.git/drivers/iio/adc, branch linux-6.9.y

iio: adc: ad7266: Fix variable checking bug

2024-07-05T07:38:07Z

commit a2b86132955268b2a1703082fbc2d4832fc001b8 upstream. The ret variable was not checked after iio_device_release_direct_mode(), which could possibly cause errors Fixes: c70df20e3159 ("iio: adc: ad7266: claim direct mode during sensor read") Signed-off-by: Fernando Yang Link: https://lore.kernel.org/r/20240603180757.8560-1-hagisf@usp.br Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: xilinx-ams: Don't include ams_ctrl_channels in scan_mask

2024-07-05T07:38:06Z

[ Upstream commit 89b898c627a49b978a4c323ea6856eacfc21f6ba ] ams_enable_channel_sequence constructs a "scan_mask" for all the PS and PL channels. This works out fine, since scan_index for these channels is less than 64. However, it also includes the ams_ctrl_channels, where scan_index is greater than 64, triggering undefined behavior. Since we don't need these channels anyway, just exclude them. Fixes: d5c70627a794 ("iio: adc: Add Xilinx AMS driver") Signed-off-by: Sean Anderson Link: https://lore.kernel.org/r/20240311162800.11074-1-sean.anderson@linux.dev Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: axi-adc: make sure AXI clock is enabled

2024-06-21T12:40:35Z

commit 80721776c5af6f6dce7d84ba8df063957aa425a2 upstream. We can only access the IP core registers if the bus clock is enabled. As such we need to get and enable it and not rely on anyone else to do it. Note this clock is a very fundamental one that is typically enabled pretty early during boot. Independently of that, we should really rely on it to be enabled. Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core") Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240426-ad9467-new-features-v2-4-6361fc3ba1cc@analog.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: ad9467: fix scan type sign

2024-06-21T12:40:27Z

commit 8a01ef749b0a632f0e1f4ead0f08b3310d99fcb1 upstream. According to the IIO documentation, the sign in the scan type should be lower case. The ad9467 driver was incorrectly using upper case. Fix by changing to lower case. Fixes: 4606d0f4b05f ("iio: adc: ad9467: add support for AD9434 high-speed ADC") Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: David Lechner Link: https://lore.kernel.org/r/20240503-ad9467-fix-scan-type-sign-v1-1-c7a1a066ebb9@baylibre.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: PAC1934: fix accessing out of bounds array index

2024-06-12T09:39:16Z

[ Upstream commit 51fafb3cd7fcf4f4682693b4d2883e2a5bfffe33 ] Fix accessing out of bounds array index for average current and voltage measurements. The device itself has only 4 channels, but in sysfs there are "fake" channels for the average voltages and currents too. Fixes: 0fb528c8255b ("iio: adc: adding support for PAC193x") Reported-by: Conor Dooley Signed-off-by: Marius Cristea Closes: https://lore.kernel.org/linux-iio/20240405-embellish-bonnet-ab5f10560d93@wendy/ Tested-by: Conor Dooley Link: https://lore.kernel.org/r/20240425114232.81390-1-marius.cristea@microchip.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: adi-axi-adc: only error out in major version mismatch

2024-06-12T09:39:12Z

[ Upstream commit cf1c833f89e7c8635a28c3db15c68ead150ea712 ] The IP core only has breaking changes when there major version changes. Hence, only match the major number. This is also in line with the other core ADI has upstream. The current check for erroring out 'expected_version > current_version"' is then wrong as we could just increase the core major with breaking changes and that would go unnoticed. Fixes: ef04070692a2 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core") Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20240419-ad9467-new-features-v1-2-3e7628ff6d5e@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: stm32: Fixing err code to not indicate success

2024-06-12T09:39:11Z

[ Upstream commit 3735ca0b072656c3aa2cedc617a5e639b583a472 ] This path would result in returning 0 / success on an error path. Cc: Olivier Moysan Fixes: 95bc818404b2 ("iio: adc: stm32-adc: add support of generic channels binding") Reviewed-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20240330185305.1319844-4-jic23@kernel.org Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2024-03-21T20:21:31Z

Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ...

Merge tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2024-03-13T18:07:37Z

Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ...

iio: adc: qcom-pm8xxx-xoadc: drop unused kerneldoc struct pm8xxx_chan_info member

2024-02-28T19:26:38Z

Drop description of non-existing 'struct pm8xxx_chan_info' member: qcom-pm8xxx-xoadc.c:386: warning: Excess struct member 'scale_fn_type' description in 'pm8xxx_chan_info' Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20240225202744.60500-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron