kernel.git/drivers/iio/adc, branch linux-5.19.y

iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume

2022-10-24T07:57:47Z

[ Upstream commit 808175e21d9b7f866eda742e8970f27b78afe5db ] In case triggered buffers are enabled while system is suspended they will not work anymore after resume. For this call at91_adc_buffer_postdisable() on suspend and at91_adc_buffer_prepare() on resume. On tests it has been seen that at91_adc_buffer_postdisable() call is not necessary but it has been kept because it also does the book keeping for DMA. On resume path there is no need to call at91_adc_configure_touch() as it is embedded in at91_adc_buffer_prepare(). Fixes: 073c662017f2f ("iio: adc: at91-sama5d2_adc: add support for DMA") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220803102855.2191070-5-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq

2022-10-24T07:57:46Z

[ Upstream commit 9780a23ed5a0a0a63683e078f576719a98d4fb70 ] .read_raw()/.write_raw() could be called asynchronously from user space or other in kernel drivers. Without locking on st->lock these could be called asynchronously while there is a conversion in progress. Read will be harmless but changing registers while conversion is in progress may lead to inconsistent results. Thus, to avoid this lock st->lock. Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver") Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220803102855.2191070-4-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: at91-sama5d2_adc: check return status for pressure and touch

2022-10-24T07:57:46Z

[ Upstream commit d84ace944a3b24529798dbae1340dea098473155 ] Check return status of at91_adc_read_position() and at91_adc_read_pressure() in at91_adc_read_info_raw(). Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220803102855.2191070-3-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX

2022-10-24T07:57:46Z

[ Upstream commit bb73d5d9164c57c4bb916739a98e5cd8e0a5ed8c ] All ADC HW versions handled by this driver (SAMA5D2, SAM9X60, SAMA7G5) have MR.TRACKTIM on 4 bits. Fix AT91_SAMA5D2_MR_TRACKTIM_MAX to reflect this. Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20220803102855.2191070-2-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: ad7923: fix channel readings for some variants

2022-10-24T07:56:41Z

commit f4f43f01cff2f29779343ade755191afd2581c77 upstream. Some of the supported devices have 4 or 2 LSB trailing bits that should not be taken into account. Hence we need to shift these bits out which fits perfectly on the scan type shift property. This change fixes both raw and buffered reads. Fixes: f2f7a449707e ("iio:adc:ad7923: Add support for the ad7904/ad7914/ad7924") Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928") Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20220912081223.173584-2-nuno.sa@analog.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ltc2497: Fix reading conversion results

2022-10-24T07:56:41Z

commit 7f4f1096d5921f5d90547596f9ce80e0b924f887 upstream. After the result of the previous conversion is read the chip automatically starts a new conversion and doesn't accept new i2c transfers until this conversion is completed which makes the function return failure. So add an early return iff the programming of the new address isn't needed. Note this will not fix the problem in general, but all cases that are currently used. Once this changes we get the failure back, but this can be addressed when the need arises. Fixes: 69548b7c2c4f ("iio: adc: ltc2497: split protocol independent part in a separate module ") Reported-by: Meng Li Signed-off-by: Uwe Kleine-König Tested-by: Denys Zagorui Cc: Link: https://lore.kernel.org/r/20220815091647.1523532-1-dzagorui@cisco.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp3911: use correct formula for AD conversion

2022-09-08T09:24:01Z

commit 9e2238e3ae40d371a1130226e0e740aa1601efa6 upstream. The ADC conversion is actually not rail-to-rail but with a factor 1.5. Make use of this factor when calculating actual voltage. Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911") Signed-off-by: Marcus Folkesson Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220722130726.7627-4-marcus.folkesson@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp3911: correct "microchip,device-addr" property

2022-09-08T09:24:01Z

commit cfbd76d5c9c449739bb74288d982bccf9ff822f4 upstream. Go for the right property name that is documented in the bindings. Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911") Signed-off-by: Marcus Folkesson Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220722130726.7627-3-marcus.folkesson@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ad7292: Prevent regulator double disable

2022-09-08T09:24:01Z

commit 22b4277641c6823ec03d5b1cd82628e5e53e75b7 upstream. The ad7292 tries to add an devm_action for disabling a regulator at device detach using devm_add_action_or_reset(). The devm_add_action_or_reset() does call the release function should adding action fail. The driver inspects the value returned by devm_add_action_or_reset() and manually calls regulator_disable() if adding the action has failed. This leads to double disable and messes the enable count for regulator. Do not manually call disable if devm_add_action_or_reset() fails. Fixes: 506d2e317a0a ("iio: adc: Add driver support for AD7292") Signed-off-by: Matti Vaittinen Tested-by: Marcelo Schmitt Link: https://lore.kernel.org/r/Yv9O+9sxU7gAv3vM@fedora Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp3911: make use of the sign bit

2022-09-08T09:23:57Z

[ Upstream commit 8f89e33bf040bbef66386c426198622180233178 ] The device supports negative values as well. Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911") Signed-off-by: Marcus Folkesson Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220722130726.7627-2-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin