kernel.git/drivers/iio/adc, branch linux-4.15.y

iio: adc: meson-saradc: unlock on error in meson_sar_adc_lock()

2018-03-28T16:22:53Z

commit 3c3e4b3a708a9d6451052e348981f37d2b3e92b0 upstream. The meson_sar_adc_lock() function is not supposed to hold the "indio_dev->mlock" on the error path. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: Dan Carpenter Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: ina2xx: Shift bus voltage register to mask flag bits

2018-03-19T08:09:54Z

[ Upstream commit 2e64438487697f3f099946edc8acd4ceea6b1ab2 ] Lower bits of the INA219/220 bus voltage register are conversion status flags, properly shift the value. When reading via IIO buffer, the value is passed on unaltered, shifting is the responsibility of the user. Signed-off-by: Stefan Brüns Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: adc: stm32: fix stm32h7_adc_enable error handling

2018-02-28T09:21:34Z

commit a3b5655ebdb501a98a45c0d3265dca9f2fe0218a upstream. Error handling in stm32h7_adc_enable routine doesn't unwind enable sequence correctly. ADEN can only be cleared by hardware (e.g. by writing one to ADDIS). It's also better to clear ADRDY just after it's been set by hardware. Fixes: 95e339b6e85d ("iio: adc: stm32: add support for STM32H7") Signed-off-by: Fabrice Gasnier Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc/accel: Fix up module licenses

2018-02-07T19:14:08Z

commit 9a0ebbc93547d88f422905c34dcceebe928f3e9e upstream. The module license checker complains about these two so just fix it up. They are both GPLv2, both written by me or using code I extracted while refactoring from the GPLv2 drivers. Cc: Randy Dunlap Reported-by: Randy Dunlap Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: stm32: fix scan of multiple channels with DMA

2018-02-03T16:58:42Z

commit 04e491ca9df60ffe8637d00d68e5ab8bc73b30d5 upstream. By default, watermark is set to '1'. Watermark is used to fine tune cyclic dma buffer period. In case watermark is left untouched (e.g. 1) and several channels are being scanned, buffer period is wrongly set (e.g. to 1 sample). As a consequence, data is never pushed to upper layer. Fix buffer period size, by taking scan channels number into account. Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support") Signed-off-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13

2017-12-02T11:15:14Z

The Meson GXBB and newer SoCs have a few more registers than the older Meson8 and Meson8b SoCs. Use a separate regmap config to limit the older SoCs to the DELTA_10 register. Fixes: 6c76ed31cd05 ("iio: adc: meson-saradc: add Meson8b SoC compatibility") Signed-off-by: Martin Blumenstingl Cc: Signed-off-by: Jonathan Cameron

iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs

2017-12-02T11:15:14Z

Meson8 and Meson8b do not have the MESON_SAR_ADC_REG11 register. The bandgap setting for these SoCs is configured in the MESON_SAR_ADC_DELTA_10 register instead. Make the driver aware of this difference and use the correct bandgap register depending on the SoC. This has worked fine on Meson8 and Meson8b because the bootloader is already initializing the bandgap setting. Fixes: 6c76ed31cd05 ("iio: adc: meson-saradc: add Meson8b SoC compatibility") Signed-off-by: Martin Blumenstingl Cc: Signed-off-by: Jonathan Cameron

iio: adc: meson-saradc: fix the bit_idx of the adc_en clock

2017-12-02T11:15:13Z

Meson8 and Meson8b SoCs use the the SAR ADC gate clock provided by the MESON_SAR_ADC_REG3 register within the SAR ADC register area. According to the datasheet (and the existing MESON_SAR_ADC_REG3_CLK_EN definition) the gate is on bit 30. The fls() function returns the last set bit, which is "bit index + 1" (fls(MESON_SAR_ADC_REG3_CLK_EN) returns 31). Fix this by switching to __ffs() which returns the first set bit, which is bit 30 in our case. This off by one error results in the ADC not being usable on devices where the bootloader did not enable the clock. Fixes: 3adbf3427330 ("iio: adc: add a driver for the SAR ADC found in Amlogic Meson SoCs") Signed-off-by: Martin Blumenstingl Cc: Signed-off-by: Jonathan Cameron

iio: adc: cpcap: fix incorrect validation

2017-12-02T11:15:13Z

Function platform_get_irq_byname() returns a negative error code on failure, and a zero or positive number on success. However, in function cpcap_adc_probe(), positive IRQ numbers are also taken as error cases. Use "if (ddata->irq < 0)" instead of "if (!ddata->irq)" to validate the return value of platform_get_irq_byname(). Signed-off-by: Pan Bian Fixes: 25ec249632d50 ("iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC") Reviewed-by: Sebastian Reichel Acked-by: Tony Lindgren Cc: Signed-off-by: Jonathan Cameron

Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2017-11-14T04:53:28Z

Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...