kernel.git/drivers/iio/adc/Makefile, branch linux-4.12.y

Merge tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2017-05-06T01:16:23Z

Pull staging/IIO updates from Greg KH: "Here is the big staging tree update for 4.12-rc1. It's a big one, adding about 350k new lines of crap^Wcode, mostly all in a big dump of media drivers from Intel. But there's other new drivers in here as well, yet-another-wifi driver, new IIO drivers, and a new crypto accelerator. We also deleted a bunch of stuff, mostly in patch cleanups, but also the Android ION code has shrunk a lot, and the Android low memory killer driver was finally deleted, much to the celebration of the -mm developers. All of these have been in linux-next with a few build issues that will show up when you merge to your tree" Merge conflicts in the new rtl8723bs driver (due to the wifi changes this merge window) handled as per linux-next, courtesy of Stephen Rothwell. * tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits) staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd staging: ks7010: remove line continuations in quoted strings staging: vt6656: use tabs instead of spaces staging: android: ion: Fix unnecessary initialization of static variable staging: media: atomisp: fix range checking on clk_num staging: media: atomisp: fix misspelled word in comment staging: media: atomisp: kmap() can't fail staging: atomisp: remove #ifdef for runtime PM functions staging: atomisp: satm include directory is gone atomisp: remove some more unused files atomisp: remove hmm_load/store/clear indirections atomisp: kill off mmgr_free atomisp: clean up the hmm init/cleanup indirections atomisp: handle allocation calls before init in the hmm layer staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver staging: fsl-dpaa2/eth: Add TODO file staging: fsl-dpaa2/eth: Add trace points staging: fsl-dpaa2/eth: Add driver specific stats staging: fsl-dpaa2/eth: Add ethtool support staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver ...

iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs

2017-04-27T08:25:07Z

The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the battery voltage, battery charge and discharge currents, AC-in and VBUS voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature. This adds support for most of AXP20X and AXP22X ADCs. Signed-off-by: Quentin Schulz Acked-by: Maxime Ripard Acked-by: Chen-Yu Tsai Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones

iio: adc: add max1117/max1118/max1119 ADC driver

2017-04-14T14:09:06Z

This adds max1117/max1118/max1119 8-bit, dual-channel ADC driver. This new driver uses the zero length spi_transfers with the cs_change flag set and/or the non-zero delay_usecs. 1. The zero length transfer with the spi_transfer.cs_change set is required in order to select CH1. The chip select line must be brought high and low again without transfer. 2. The zero length transfer with the spi_transfer.delay_usecs > 0 is required for waiting the conversion to be complete. The conversion begins with the falling edge of the chip select. During the conversion process, SCLK is ignored. These two usages are unusual. But the spi controller drivers that use a default implementation of transfer_one_message() are likely to work. (I've tested this adc driver with spi-omap2-mcspi and spi-xilinx) On the other hand, some spi controller drivers that have their own transfer_one_message() may not work. But at least for the zero length transfer with delay_usecs > 0, I'm proposing a new testcase for the spi-loopback-test that can test whether the delay_usecs setting has taken effect. Acked-by: Rob Herring Signed-off-by: Akinobu Mita Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald-Stadler Cc: Rob Herring Cc: Mark Rutland Cc: Mark Brown Signed-off-by: Jonathan Cameron

iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC

2017-04-08T16:42:26Z

The Qualcomm PM8xxx PMICs contain a simpler ADC than its successors (already in the kernel as qcom-spmi-vadc.c): the HK/XO ADC (Housekeeping/Chrystal oscillator ADC). As far as I can understand this is equal to the PMICs using SSBI transport and encompass PM8018, PM8038, PM8058, and PM8921, so this is shortly named PM8xxx. This ADC monitors a bunch of on-board voltages and the die temperature of the PMIC itself, but it can also be routed to convert a few external MPPs (multi-purpose pins). On the APQ8060 DragonBoard this feature is used to let this ADC convert an analog ALS (Ambient Light Sensor) voltage signal from a Capella CM3605 ALS into a LUX value. Developed and tested with APQ8060 DragonBoard based on Ivan's driver and Rama Krishna's patches. The SPMI VADC driver is quite different, but share enough minor functionality that I have split out to the common file in a previous patch. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: Ivan T. Ivanov Cc: Andy Gross Cc: Bjorn Andersson Cc: Stephen Boyd Cc: Srinivas Kandagatla Cc: Rama Krishna Phani A Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron

iio: adc: break out common code from SPMI VADC

2017-04-08T16:40:49Z

The SPMI VADC and the earlier XOADC share a subset of common code, so to be able to use the same code in both drivers, we break out a separate file with the common code, prefix exported functions that are no longer static with qcom_* and bake an object qcom-spmi-vadc.o that contains both files: qcom-vadc-common.o and qcom-spmi-vadc-core.o. As we need to follow the procedure for making a kernel module or compiled in object from several files, but still want to produce the same module name, rename the qcom-spmi-vadc.c file to qcom-spmi-vadc-core.c so we can bake the two objects into qcom-spmi-vadc.o Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: Ivan T. Ivanov Cc: Andy Gross Cc: Bjorn Andersson Cc: Stephen Boyd Cc: Srinivas Kandagatla Cc: Rama Krishna Phani A Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron

iio: adc: Add Maxim max9611 ADC driver

2017-04-08T16:26:06Z

Add iio driver for Maxim max9611 and max9612 current-sense amplifiers with 12-bits ADC interface. Datasheet publicly available at: https://datasheets.maximintegrated.com/en/ds/MAX9611-MAX9612.pdf Signed-off-by: Jacopo Mondi Signed-off-by: Jonathan Cameron

iio:adc: Driver for Linear Technology LTC2497 ADC

2017-04-02T09:56:59Z

This patch adds support for the Analog Devices / Linear Technology LTC2497 ADCs. The LTC2497 is a 16-channel (eight differential), 16-bit, high precision, delta-sigma ADC with an automatic, differential, input current cancellation front end and a 2-wire, I2C interface. Signed-off-by: Michael Hennerich Signed-off-by: Jonathan Cameron

iio: Aspeed ADC

2017-04-01T10:53:20Z

Aspeed BMC SoCs include a 16 channel, 10-bit ADC. Low and high threshold interrupts are supported by the hardware but are not currently implemented. Signed-off-by: Rick Altherr Tested-by: Xo Wang Reviewed-by: Joel Stanley Signed-off-by: Jonathan Cameron

iio: adc: cpcap: Add minimal support for CPCAP PMIC ADC

2017-03-30T18:25:23Z

On Motorola phones like droid 4 there is a custom CPCAP PMIC. This PMIC has ADCs that are used for battery charging and USB PHY VBUS and ID pin detection. Unfortunately the only documentation for this ADC seems to be the Motorola mapphone Linux kernel tree. I have tested that reading raw and scaled values works, but I have not used the timed sampling that the ADC seems to support. Let's add a minimal support for it so we can eventually provide IIO channels for the related battery charging and USB PHY drivers. Cc: devicetree@vger.kernel.org Cc: Marcel Partap Cc: Michael Scott Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Acked-by: Rob Herring Signed-off-by: Jonathan Cameron

iio: adc: mxs-lradc: Remove driver

2017-03-23T12:29:01Z

Since the driver has been split into MFD there is no reason for it to stay, so remove it. Signed-off-by: Ksenija Stanojevic Acked-by: Jonathan Cameron Reviewed-by: Marek Vasut Signed-off-by: Lee Jones