kernel.git/drivers/iio/adc/Makefile, branch linux-3.17.y

staging:iio:ad7291: Move out of staging

2014-07-08T20:17:30Z

The ad7291 driver is in a reasonable shape. It does not use non-standard API/ABI and there are no major style issues with the driver. So this patch moves it out of staging. There is one small warning from checkpatch which is also fixed in this patch. The patch also sorts the #include directives in alphabetical order. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron

iio: add support of the max1027

2014-06-28T08:54:14Z

This driver add partial support of the maxim 1027/1029/1031. Differential mode is not supported. It was tested on armadeus apf27 board. Signed-off-by: Philippe Reynes Reviewed-by: Hartmut Knaack Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-3.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2014-04-26T15:12:25Z

Jonathan writes: First round of IIO new driver, functionality and cleanups for the 3.16 cycle. New device support * AS3935 Lightning Sensor * MCP3426/7/8 support added to the existing MCP3422 ADC driver * AK8963 support in the AK8975 driver * MPU6500 support in the MPU6050 driver (the functionality that is different is mostly not supported yet in either part). Staging Graduations * AD799x ADC New functionality * ACPI enumeration for the ak8975 driver Cleanup / tweaks * Use snprintf as a matter of good practice in a few additional places. * Document *_mean_raw attributes. These have been there a while, but were undocumented. * Add an in kernel interface to get the mean values. * Bug in the length of the event info mask that by coincidence wasn't yet actually causing any problems. * itg3000 drop an unreachable return statement. * spear_adc cleanups (heading for a staging graduation but a few more issues showed up in the review of these patches). * Exynos ADC dependencies changed so it is only built when Exynos is present or COMPILE_TEST and OF are set. * tsl2583 cleanups. * Some cut and paste typos in the comments of various drivers still in staging. * Couple of minor improvements to the ST sensor drivers.

Merge tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2014-04-07T17:24:18Z

Pull MFD updates from Lee Jones: "Changes to existing drivers: - Use of managed resources - omap, twl4030, ti_am335x_tscadc - Advanced error handling - omap - Rework clk management - omap - Device Tree (re-)work - tc3589x, pm8921, da9055, sec - IRC management overhaul and !BROKEN - pm8921 - Convert to regmap - ssbi, pm8921 - Use simple power-management ops - ucb1x00 - Include file clean-up - adp5520, cs5535, janz, lpc_ich, - lpc_sch, max14577, mcp-sa11x0, pcf50633-adc, rc5t583, rdc321x-southbridge, retu, smsc-ece1099, ti-ssp, ti_am335x_tscadc, tps65912, vexpress-config, wm8350, ywm8350 - Various bug fixes across the subsystem - NULL/invalid pointer dereference prevention - Resource leak mitigation, - Variable used initialised - Staticise various containers - Enforce return value checks New drivers/supported devices: - Add support for s2mps14 and s2mpa01 to sec - Add support for da9063 (v5) to da9063 - Add support for atom-c2000 to gpio-ich - Add support for come-{mbt10,cbt6,chl6} to kempld - Add support for da9053 to da9052 - Add support for itco-wdt (v3) and baytrail to lpc_ich - Add new drivers for tps65218, rtsx_usb, bcm590xx (Re-)moved drivers: - twl4030 ==> drivers/iio - ti-ssp ==> /dev/null" * tag 'mfd-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (103 commits) mfd: wm5110: Correct default for HEADPHONE_DETECT_1 mfd: arizona: Correct small errors in the DT binding documentation mfd: arizona: Mark DSP clocking register as volatile mfd: devicetree: bindings: Add pm8xxx RTC description mfd: kempld-core: Fix potential hang-up during boot mfd: sec-core: Fix uninitialized 'regmap_rtc' on S2MPA01 mfd: tps65910: Fix regmap_irq_chip_data leak on mfd_add_devices fail mfd: tps65910: Fix possible invalid pointer dereference on regmap_add_irq_chip fail mfd: sec-core: Fix I2C dummy device resource leak on probe failure mfd: sec-core: Add of_compatible strings for clock MFD cells mfd: Remove obsolete ti-ssp driver Documentation: mfd: s2mps11: Describe S5M8767 and S2MPS14 clocks mfd: bcm590xx: Fix type argument for module device table mfd: lpc_ich: Add support for Intel Bay Trail SoC mfd: lpc_ich: Add support for NM10 GPIO mfd: lpc_ich: Change Avoton to iTCO v3 watchdog: iTCO_wdt: Add support for v3 silicon mfd: lpc_ich: Add support for iTCO v3 mfd: lpc_ich: Remove lpc_ich_cfg struct use mfd: lpc_ich: Only configure watchdog or GPIO when present ...

Merge tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2014-04-01T23:45:00Z

Pull staging driver updates from Greg KH: "Here's the huge drivers/staging/ update for 3.15-rc1. Loads of cleanup fixes, a few drivers removed, and some new ones added. All have been in linux-next for a while" * tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits) staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig staging: comedi: poc: remove obsolete driver staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE staging: octeon-usb: prevent memory corruption staging: usbip: fix line over 80 characters staging: usbip: fix quoted string split across lines Staging: unisys: Remove RETINT macro Staging: unisys: Remove FAIL macro Staging: unisys: Remove RETVOID macro Staging: unisys: Remove RETPTR macro Staging: unisys: Remove RETBOOL macro Staging: unisys: Remove FAIL_WPOSTCODE_1 macro Staging: unisys: Cleanup macros to get rid of goto statements Staging: unisys: include: Remove unused macros from timskmod.h staging: dgap: fix the rest of the checkpatch warnings in dgap.c Staging: bcm: Remove unnecessary parentheses staging: wlags49_h2: Delete unnecessary braces staging: wlags49_h2: Do not use assignment in if condition staging: wlags49_h2: Enclose macro in a do-while loop ...

mfd: twl4030-madc: Move driver to drivers/iio/adc

2014-03-18T08:16:20Z

This is a driver for an A/D converter, which belongs into drivers/iio/adc. Signed-off-by: Sebastian Reichel Acked-by: Jonathan Cameron Signed-off-by: Lee Jones

staging:iio: Move ad799x driver out of staging

2014-03-16T18:00:34Z

The driver is now at a reasonable quality level. Move it out of staging. Signed-off-by: Lars-Peter Clausen Acked-by: Hartmut Knaack Signed-off-by: Jonathan Cameron

iio:adc: Add Xilinx XADC driver

2014-03-01T21:04:29Z

The Xilinx XADC is a ADC that can be found in the series 7 FPGAs from Xilinx. The XADC has a DRP interface for communication. Currently two different frontends for the DRP interface exist. One that is only available on the ZYNQ family as a hardmacro in the SoC portion of the ZYNQ. The other one is available on all series 7 platforms and is a softmacro with a AXI interface. This driver supports both interfaces and internally has a small abstraction layer that hides the specifics of these interfaces from the main driver logic. The ADC has a couple of internal channels which are used for voltage and temperature monitoring of the FPGA as well as one primary and up to 16 channels auxiliary channels for measuring external voltages. The external auxiliary channels can either be directly connected each to one physical pin on the FPGA or they can make use of an external multiplexer which is responsible for multiplexing the external signals onto one pair of physical pins. The voltage and temperature monitoring channels also have an event capability which allows to generate a interrupt when their value falls below or raises above a set threshold. Buffered sampling mode is supported by the driver, but only for AXI-XADC since the ZYNQ XADC interface does not have capabilities for supporting buffer mode (no end-of-conversion interrupt). If buffered mode is supported the driver will register two triggers. One "xadc-samplerate" trigger which will generate samples with the configured samplerate. And one "xadc-convst" trigger which will generate one sample each time the CONVST (conversion start) signal is asserted. Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron

iio: adc: Add MEN 16z188 ADC driver

2014-02-28T23:47:57Z

Add support for MEN 16z188 ADC IP Core on MCB FPGAs. Signed-off-by: Johannes Thumshirn Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio:adc:imx: add Freescale Vybrid vf610 adc driver

2014-02-15T10:29:11Z

Add Freescale Vybrid vf610 adc driver. The driver only support ADC software trigger. VF610 ADC device documentation is available at below reference manual (chapter 37): http://cache.freescale.com/files/32bit/doc/ref_manual/VYBRIDRM.pdf? fpsp=1&WT_TYPE=Reference%20Manuals&WT_VENDOR=FREESCALE&WT_FILE_FORMAT =pdf&WT_ASSET=Documentation CC: Shawn Guo CC: Jonathan Cameron CC: Mark Rutland CC: Otavio Salvador CC: Peter Meerwald CC: Lars-Peter Clausen Signed-off-by: Fugang Duan Signed-off-by: Jonathan Cameron