kernel.git/drivers/ide/pci/generic.c, branch linux-2.6.25.y

ide-pci-generic: kill the unused ifdef/endif/MODULE code

2008-02-06T01:57:49Z

with module_param macro, the __setup code can be killed now: const __setup("all-generic-ide", ide_generic_all_on); and the module name "generic.ko" is not descriptive to its functionality, can be changed in Makefile, the "ide-pci-generic.ko" is better. the ide-pci-generic.all-generic-ide parameter also documented in Documentation/kernel-parameters.txt Signed-off-by: Denis Cheng Cc: Greg Kroah-Hartman Signed-off-by: Bartlomiej Zolnierkiewicz

ide: remove needless includes from PCI host drivers

2008-02-02T18:56:33Z

Signed-off-by: Bartlomiej Zolnierkiewicz

ide: delete filenames/versions from comments

2008-02-01T22:09:33Z

Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: add IDE_HFLAG_CLEAR_SIMPLEX host flag

2008-02-01T22:09:30Z

* Rename 'simplex_stat' variable to 'dma_stat' in ide_get_or_set_dma_base(). * Factor out code for forcing host out of "simplex" mode from ide_get_or_set_dma_base() to ide_pci_clear_simplex() helper. * Add IDE_HFLAG_CLEAR_SIMPLEX host flag and set it in alim15x3 (for M5229), amd74xx (for AMD 7409), cmd64x (for CMD643), generic (for Netcell) and serverworks (for CSB5) host drivers. * Make ide_get_or_set_dma_base() test for IDE_HFLAG_CLEAR_SIMPLEX host flag instead of checking dev->device (BTW the code was buggy because it didn't check for dev->vendor, luckily none of these PCI Device IDs was used by some other vendor for PCI IDE controller). Signed-off-by: Bartlomiej Zolnierkiewicz

drivers/ide/pci/generic: fix build for CONFIG_HOTPLUG=n

2007-10-26T18:31:15Z

It turns out that const and __{dev}initdata cannot be mixed currently and that generic IDE PCI host driver is also affected by the same issue: On Thursday 25 October 2007, Ralf Baechle wrote: > CC drivers/ide/pci/generic.o > drivers/ide/pci/generic.c:52: error: __setup_str_ide_generic_all_on causes a > +section type conflict [ Also reported by Martijn Uffing . ] This patch workarounds the problem in a bit hackish way but without removing const from generic_chipsets[] (it adds const to __setup() so __setup_str_ide_generic_all becomes const). Now all __{dev}initdata data in generic IDE PCI host driver are read-only so it builds again (driver's .init.data section gets marked as READONLY). Cc: Martijn Uffing Cc: Ralf Baechle Cc: Andrew Morton Signed-off-by: Bartlomiej Zolnierkiewicz

ide: constify struct ide_port_info

2007-10-19T22:32:34Z

Signed-off-by: Bartlomiej Zolnierkiewicz

ide: replace ide_pci_device_t by struct ide_port_info

2007-10-19T22:32:34Z

* Rename struct ide_pci_device_s to struct ide_port_info. * Remove ide_pci_device_t typedef. While at it: * Fix __ide_pci_register_driver() comment. * Fix aec62xx_init_one() comment. * Remove unused 'cds' field from ide_hwgroup_t. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: add IDE_HFLAG_FORCE_LEGACY_IRQS host flag

2007-10-19T22:32:30Z

Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to always set hwif->irq to legacy IRQ 14/15 and convert generic IDE PCI and via82cxxx host drivers to use it. While at it: * Add IDE_HFLAGS_UMC define (generic IDE PCI host driver). * Remove no longer needed init_hwif_generic() (generic IDE PCI host driver). * Set d->udma_mask instead of hwif->ultra_mask (via82cxxx host driver). Signed-off-by: Bartlomiej Zolnierkiewicz

ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)

2007-10-18T22:30:07Z

* Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t. * Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif method may still override them). * Convert IDE PCI host drivers to use ide_pci_device_t DMA masks. While at it: * Use ATA_{UDMA,MWDMA,SWDMA}* defines. * hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345. * serverworks.c: fix DMA masks being set before checking DMA base. v2: * Add missing masks to DECLARE_GENERIC_PCI_DEV() macro. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flags

2007-10-18T22:30:06Z

Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags. Convert all host drivers using ide_pci_device_t to use these flags instead of d->autodma and then remove no longer needed d->autodma. Signed-off-by: Bartlomiej Zolnierkiewicz