kernel.git/drivers/i2c/i2c-core-base.c, branch linux-5.11.y

i2c: turn recovery error on init to debug

2021-04-14T06:47:14Z

commit e409a6a3e0690efdef9b8a96197bc61ff117cfaf upstream. In some configurations, recovery is optional. So, don't throw an error when it is not used because e.g. pinctrl settings for recovery are not provided. Reword the message and make it debug output. Reported-by: Klaus Kudielka Tested-by: Klaus Kudielka Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

i2c: remove check that can never be true

2020-12-11T14:43:49Z

A driver remove callback is only called if the device was bound before. So it's sure that both dev and dev->driver are valid and dev is an i2c device. If the check fails something louder than "return 0" might be appropriate because the problem is grave (something like memory corruption), otherwise the check is useless. Signed-off-by: Uwe Kleine-König Signed-off-by: Wolfram Sang

i2c: Warn when device removing fails

2020-12-11T14:42:19Z

The driver core ignores the return value of struct bus_type::remove. So warn if there is an error that went unnoticed before and return 0 unconditionally in i2c_device_remove(). This prepares changing struct bus_type::remove to return void. Signed-off-by: Uwe Kleine-König [wsa: added a comment and removed unneeded initializtion] Signed-off-by: Wolfram Sang

i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()

2020-09-17T21:16:59Z

Some ACPI i2c-devices _STA method (which is used to detect if the device is present) use autodetection code which probes which device is present over i2c. This requires the I2C ACPI OpRegion handler to be registered before we enumerate i2c-clients under the i2c-adapter. This fixes the i2c touchpad on the Lenovo ThinkBook 14-IIL and ThinkBook 15 IIL not getting an i2c-client instantiated and thus not working. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1842039 Signed-off-by: Hans de Goede Reviewed-by: Mika Westerberg Signed-off-by: Wolfram Sang

i2c: core: Don't fail PRP0001 enumeration when no ID table exist

2020-08-25T07:21:55Z

When commit c64ffff7a9d1 ("i2c: core: Allow empty id_table in ACPI case as well") fixed the enumeration of I²C devices on ACPI enabled platforms when driver has no ID table, it missed the PRP0001 support. i2c_device_match() and i2c_acpi_match_device() differently match driver against given device. Use acpi_driver_match_device(), that is used in the former, in i2c_device_probe() and don't fail PRP0001 enumeration when no ID table exist. Fixes: c64ffff7a9d1 ("i2c: core: Allow empty id_table in ACPI case as well") BugLink: https://stackoverflow.com/q/63519678/2511795 Signed-off-by: Andy Shevchenko Reviewed-by: Mika Westerberg Signed-off-by: Wolfram Sang

i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs

2020-08-05T09:52:27Z

Even if I2C bus GPIO recovery is optional, devm_gpiod_get() can return -EPROBE_DEFER, so we should at least treat that. This ends up with i2c_register_adapter() to be able to return -EPROBE_DEFER. Signed-off-by: Codrin Ciubotariu Signed-off-by: Wolfram Sang

i2c: core: add generic I2C GPIO recovery

2020-08-05T09:52:27Z

Multiple I2C bus drivers use similar bindings to obtain information needed for I2C recovery. For example, for platforms using device-tree, the properties look something like this: &i2c { ... pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c_default>; pinctrl-1 = <&pinctrl_i2c_gpio>; sda-gpios = <&pio 0 GPIO_ACTIVE_HIGH>; scl-gpios = <&pio 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; ... } For this reason, we can add this common initialization in the core. This way, other I2C bus drivers will be able to support GPIO recovery just by providing a pointer to platform's pinctrl and calling i2c_recover_bus() when SDA is stuck low. Signed-off-by: Codrin Ciubotariu [wsa: inverted one logic for better readability, minor update to kdoc] Signed-off-by: Wolfram Sang

i2c: core: do not use logical device when creating irq domain

2020-07-27T20:31:16Z

Let's rather use its physical parent device to give proper namings and connections in debugfs. Signed-off-by: Wolfram Sang Reviewed-by: Benjamin Tissoires Signed-off-by: Wolfram Sang

i2c: revert "i2c: core: Allow drivers to disable i2c-core irq mapping"

2020-07-24T19:48:27Z

This manually reverts commit d1d84bb95364ed604015c2b788caaf3dbca0262f. The only user has gone two years ago with commit 589edb56b424 ("ACPI / scan: Create platform device for INT33FE ACPI nodes") and no new user has showed up. Remove and hope we will never need it again. Signed-off-by: Wolfram Sang Acked-by: Hans de Goede Signed-off-by: Wolfram Sang

i2c: remove deprecated i2c_new_device API

2020-06-19T07:20:28Z

All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang