kernel.git/drivers/hwmon, branch linux-6.12.y

hwmon: (max6639) fix inverted polarity

2026-03-13T16:20:44Z

[ Upstream commit 170a4b21f49b3dcff3115b4c90758f0a0d77375a ] According to MAX6639 documentation: D1: PWM Output Polarity. PWM output is low at 100% duty cycle when this bit is set to zero. PWM output is high at 100% duty cycle when this bit is set to 1. Up to commit 0f33272b60ed ("hwmon: (max6639) : Update hwmon init using info structure"), the polarity was set to high (0x2) when no platform data was set. After the patch, the polarity register wasn't set anymore if no platform data was specified. Nowadays, since commit 7506ebcd662b ("hwmon: (max6639) : Configure based on DT property"), it is always set to low which doesn't match with the comment above and change the behavior compared to versions prior 0f33272b60ed. Fixes: 0f33272b60ed ("hwmon: (max6639) : Update hwmon init using info structure") Signed-off-by: Olivier Sobrie Link: https://lore.kernel.org/r/20260304212039.570274-1-olivier@sobrie.be Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (max6639) : Configure based on DT property

2026-03-13T16:20:44Z

[ Upstream commit 7506ebcd662b868780774d191a7c024c18c557a8 ] Remove platform data & initialize with defaults configuration & overwrite based on DT properties. Signed-off-by: Naresh Solanki Message-ID: <20241007090426.811736-1-naresh.solanki@9elements.com> [groeck: Dropped some unnecessary empty lines] Signed-off-by: Guenter Roeck Stable-dep-of: 170a4b21f49b ("hwmon: (max6639) fix inverted polarity") Signed-off-by: Sasha Levin

hwmon: (it87) Check the it87_lock() return value

2026-03-13T16:20:38Z

[ Upstream commit 07ed4f05bbfd2bc014974dcc4297fd3aa1cb88c0 ] Return early in it87_resume() if it87_lock() fails instead of ignoring the return value of that function. This patch suppresses a Clang thread-safety warning. Cc: Frank Crawford Cc: Guenter Roeck Cc: Jean Delvare Cc: linux-hwmon@vger.kernel.org Fixes: 376e1a937b30 ("hwmon: (it87) Add calls to smbus_enable/smbus_disable as required") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20260223220102.2158611-15-bart.vanassche@linux.dev [groeck: Declare 'ret' at the beginning of it87_resume()] Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (aht10) Fix initialization commands for AHT20

2026-03-13T16:20:37Z

[ Upstream commit b7497b5a99f54ab8dcda5b14a308385b2fb03d8d ] According to the AHT20 datasheet (updated to V1.0 after the 2023.09 version), the initialization command for AHT20 is 0b10111110 (0xBE). The previous sequence (0xE1) used in earlier versions is no longer compatible with newer AHT20 sensors. Update the initialization command to ensure the sensor is properly initialized. While at it, use binary notation for DHT20_CMD_INIT to match the notation used in the datasheet. Fixes: d2abcb5cc885 ("hwmon: (aht10) Add support for compatible aht20") Signed-off-by: Hao Yu Link: https://lore.kernel.org/r/20260222170332.1616-3-haoyufine@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (aht10) Add support for dht20

2026-03-13T16:20:37Z

[ Upstream commit 3eaf1b631506e8de2cb37c278d5bc042521e82c1 ] Add support for dht20 temperature and humidity sensor from Aosong. Modify aht10 driver to handle different init command for dht20 sensor by adding init_cmd entry in the driver data. dht20 sensor is compatible with aht10 hwmon driver with this change. Tested on TI am62x SK board with dht20 sensor connected at i2c-2 port. Signed-off-by: Akhilesh Patil Link: https://lore.kernel.org/r/2025112-94320-906858@bhairav-test.ee.iitb.ac.in Signed-off-by: Guenter Roeck Stable-dep-of: b7497b5a99f5 ("hwmon: (aht10) Fix initialization commands for AHT20") Signed-off-by: Sasha Levin

hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race

2026-03-13T16:20:30Z

[ Upstream commit 007be4327e443d79c9dd9e56dc16c36f6395d208 ] Simply copying shared data to a local variable cannot prevent data races. The compiler is allowed to optimize away the local copy and re-read the shared memory, causing a Time-of-Check Time-of-Use (TOCTOU) issue if the data changes between the check and the usage. To enforce the use of the local variable, use READ_ONCE() when reading the shared data and WRITE_ONCE() when updating it. Apply these macros to the three identified locations (curr_sense, adc, and fault) where local variables are used for error validation, ensuring the value remains consistent. Reported-by: Ben Hutchings Closes: https://lore.kernel.org/all/6fe17868327207e8b850cf9f88b7dc58b2021f73.camel@decadent.org.uk/ Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles") Fixes: b8d5acdcf525 ("hwmon: (max16065) Use local variable to avoid TOCTOU") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han Link: https://lore.kernel.org/r/20260203121443.5482-1-hanguidong02@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (f71882fg) Add F81968 support

2026-03-04T12:21:08Z

[ Upstream commit e4a3d6f79c9933fece64368168c46d6cf5fc2e52 ] Add hardware monitoring support for the Fintek F81968 Super I/O chip. It is fully compatible with F81866. Several products share compatibility with the F81866. To better distinguish between them, ensure that the Product ID is displayed when the device is probed. Signed-off-by: Ji-Ze Hong (Peter Hong) Link: https://lore.kernel.org/r/20251223051040.10227-1-peter_hong@fintek.com.tw Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (nct6775) Add ASUS Pro WS WRX90E-SAGE SE

2026-03-04T12:21:08Z

[ Upstream commit 246167b17c14e8a5142368ac6457e81622055e0a ] Boards Pro WS WRX90E-SAGE SE has got a nct6775 chip, but by default there's no use of it because of resource conflict with WMI method. Add the board to the WMI monitoring list. Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807 Signed-off-by: Denis Pauk Tested-by: Marcus Link: https://lore.kernel.org/r/20251231155316.2048-1-pauk.denis@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (dell-smm) Add support for Dell OptiPlex 7080

2026-03-04T12:21:08Z

[ Upstream commit 46c3e87a79179454f741f797c274dd25f5c6125e ] The Dell OptiPlex 7080 supports the legacy SMM interface for reading sensors and performing fan control. Whitelist this machine so that this driver loads automatically. Closes: https://github.com/Wer-Wolf/i8kutils/issues/16 Signed-off-by: Armin Wolf Acked-by: Pali Rohár Link: https://lore.kernel.org/r/20260104000654.6406-1-W_Armin@gmx.de Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification

2026-03-04T12:19:58Z

[ Upstream commit 9e33c1dba22431bea9b2bf48adf56859e52fc7ec ] When MPQ8785 reports VOUT_MODE as VID mode, mpq8785_identify() configures the driver for direct mode. The subsequent pmbus_identify_common() check then fails due to a mismatch between the reported mode and the configured mode, causing device initialization to fail. Override the reported VOUT_MODE to direct mode to keep the driver configuration consistent with the reported mode and allow successful device initialization. This does not change how voltages are interpreted, but avoids a false identification failure caused by mismatched mode handling. Fixes: f20b4a931130c ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter") Signed-off-by: Carl Lee Link: https://lore.kernel.org/r/20260210-dt-bindings-hwmon-pmbus-mpq8785-add-mpq8786-support-v3-1-84636ccfe76f@amd.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin