kernel.git/drivers/hwmon/pmbus, branch linux-5.4.y

hwmon: (pmbus) Initialise page count in pmbus_identify()

2025-03-13T11:43:29Z

[ Upstream commit 6b6e2e8fd0de3fa7c6f4f8fe6841b01770b2e7bc ] The `pmbus_identify()` function fails to correctly determine the number of supported pages on PMBus devices. This occurs because `info->pages` is implicitly zero-initialised, and `pmbus_set_page()` does not perform writes to the page register if `info->pages` is not yet initialised. Without this patch, `info->pages` is always set to the maximum after scanning. This patch initialises `info->pages` to `PMBUS_PAGES` before the probing loop, enabling `pmbus_set_page()` writes to make it out onto the bus correctly identifying the number of pages. `PMBUS_PAGES` seemed like a reasonable non-zero number because that's the current result of the identification process. Testing was done with a PMBus device in QEMU. Signed-off-by: Titus Rwantare Fixes: 442aba78728e7 ("hwmon: PMBus device driver") Link: https://lore.kernel.org/r/20250227222455.2583468-1-titusr@google.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus) Add Vin unit off handling

2022-04-15T12:18:05Z

[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ] If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well. Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults. If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear. Signed-off-by: Brandon Wyman Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus) Add mutex to regulator ops

2022-04-15T12:18:04Z

[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ] On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register. Tested on Infineon xdpe11280 while a separate thread polls for sensor data. Signed-off-by: Patrick Rudolph Signed-off-by: Marcello Sylvester Bauer Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeff

2021-11-17T08:48:37Z

[ Upstream commit b7931a7b0e0df4d2a25fedd895ad32c746b77bc1 ] Maintaining this manually is error prone (there are currently only five chips supported, not six); gcc can do it for us automatically. Signed-off-by: Zev Weiss Fixes: 666c14906b49 ("hwmon: (pmbus/lm25066) Drop support for LM25063") Link: https://lore.kernel.org/r/20210928092242.30036-5-zev@bewilderbeest.net Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus/lm25066) Add offset coefficients

2021-11-17T08:48:22Z

commit ae59dc455a78fb73034dd1fbb337d7e59c27cbd8 upstream. With the exception of the lm5066i, all the devices handled by this driver had been missing their offset ('b') coefficients for direct format readings. Cc: stable@vger.kernel.org Fixes: 58615a94f6a1 ("hwmon: (pmbus/lm25066) Add support for LM25056") Fixes: e53e6497fc9f ("hwmon: (pmbus/lm25066) Refactor device specific coefficients") Signed-off-by: Zev Weiss Link: https://lore.kernel.org/r/20210928092242.30036-2-zev@bewilderbeest.net Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/max34440) Fix status register reads for MAX344{51,60,61}

2020-10-29T08:57:32Z

[ Upstream commit 6c094b31ea2ad773824362ba0fccb88d36f8d32d ] Starting with MAX34451, the chips of this series support STATUS_IOUT and STATUS_TEMPERATURE commands, and no longer report over-current and over-temperature status with STATUS_MFR_SPECIFIC. Fixes: 7a001dbab4ade ("hwmon: (pmbus/max34440) Add support for MAX34451.") Fixes: 50115ac9b6f35 ("hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461") Reported-by: Steve Foreman Cc: Steve Foreman Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (adm1275) Make sure we are reading enough data for different chips

2020-07-29T08:18:38Z

[ Upstream commit 6d1d41c075a1a54ba03370e268171fec20e06563 ] Issue: When PEC is enabled, binding adm1272 to the adm1275 would fail due to PEC error. See below: adm1275: probe of xxxx failed with error -74 Diagnosis: Per the datasheet of adm1272, adm1278, adm1293 and amd1294, PMON_CONFIG (0xd4) is 16bits wide. On the other hand, PMON_CONFIG (0xd4) for adm1275 is 8bits wide. The driver should not assume everything is 8bits wide and read only 8bits from it. Solution: If it is adm1272, adm1278, adm1293 and adm1294, use i2c_read_word. Else, use i2c_read_byte Testing: Binding adm1272 to the driver. The change is only tested on adm1272. Signed-off-by: Chu Lin Link: https://lore.kernel.org/r/20200709040612.3977094-1-linchuyuan@google.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (pmbus/ltc2978) Fix PMBus polling of MFR_COMMON definitions.

2020-02-19T18:53:07Z

commit cf2b012c90e74e85d8aea7d67e48868069cfee0c upstream. Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to bits 6/5. This fixs a LTC297X family bug where polling always returns not busy even when the part is busy. This fixes a LTC388X and LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was not polled, which can lead to NACKing of commands. LTC388X and LTM467X modules now poll BUSY and PEND, increasing reliability by eliminating NACKing of commands. Signed-off-by: Mike Jones Link: https://lore.kernel.org/r/1580234400-2829-2-git-send-email-michael-a1.jones@analog.com Fixes: e04d1ce9bbb49 ("hwmon: (ltc2978) Add polling for chips requiring it") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/ibm-cffps) Fix LED blink behavior

2020-01-23T07:23:01Z

commit 92b39ad440968bab38eb6577d63c12994601ed94 upstream. The LED blink_set function incorrectly did not tell the PSU LED to blink if brightness was LED_OFF. Fix this, and also correct the LED_OFF command data, which should give control of the LED back to the PSU firmware. Also prevent I2C failures from getting the driver LED state out of sync and add some dev_dbg statements. Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20191106200106.29519-3-eajames@linux.ibm.com Fixes: ef9e1cdf419a3 ("hwmon: (pmbus/cffps) Add led class device for power supply fault led") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call

2020-01-23T07:23:00Z

commit 9861ff954c7e83e2f738ce16fbe15f8a1e121771 upstream. Since i2c_smbus functions can sleep, the brightness setting function for this driver must be the blocking version to avoid scheduling while atomic. Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20191106200106.29519-2-eajames@linux.ibm.com Fixes: ef9e1cdf419a3 ("hwmon: (pmbus/cffps) Add led class device for power supply fault led") Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman