kernel.git/drivers/hwmon/k10temp.c, branch linux-3.14.y

hwmon: (k10temp) Add support for Kaveri CPUs

2014-01-15T05:36:54Z

Add new PCI ID to support new model "Kaveri" family. Signed-off-by: Philip Pokorny Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck

hwmon: remove DEFINE_PCI_DEVICE_TABLE macro

2014-01-15T05:36:30Z

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro is not preferred. Signed-off-by: Jingoo Han Acked-by: Jean Delvare Signed-off-by: Guenter Roeck

hwmon: (k10temp) remove unnecessary pci_set_drvdata()

2013-09-12T15:17:40Z

The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Acked-by: Clemens Ladisch Signed-off-by: Guenter Roeck

hwmon: (k10temp) Add support for Fam16h (Kabini)

2013-08-27T15:28:01Z

The temperature reporting interface stays the same, so we just add the PCI-ID to the list. Verified on AMD Olive Hill. Signed-off-by: Wei Hu Acked-by: Clemens Ladisch Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Guenter Roeck

hwmon: remove use of __devexit

2012-11-28T19:50:34Z

CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton Cc: Hans de Goede Cc: Jean Delvare Cc: Alistair John Strachan Cc: Fenghua Yu Cc: Juerg Haefliger Cc: Andreas Herrmann Cc: Clemens Ladisch Cc: Rudolf Marek Cc: Jim Cromie Cc: "Mark M. Hoffman" Cc: Roger Lucas Acked-by: Guenter Roeck Acked-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

hwmon: remove use of __devinit

2012-11-28T19:49:40Z

CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton Cc: Hans de Goede Cc: Jean Delvare Cc: Alistair John Strachan Cc: Fenghua Yu Cc: Juerg Haefliger Cc: Andreas Herrmann Cc: Clemens Ladisch Cc: Rudolf Marek Cc: Jim Cromie Cc: "Mark M. Hoffman" Cc: Roger Lucas Acked-by: Guenter Roeck Acked-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

hwmon: remove use of __devexit_p

2012-11-28T19:48:59Z

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton Cc: Hans de Goede Cc: Jean Delvare Cc: Alistair John Strachan Cc: Fenghua Yu Cc: Juerg Haefliger Cc: Andreas Herrmann Cc: Clemens Ladisch Cc: Rudolf Marek Cc: Jim Cromie Cc: "Mark M. Hoffman" Cc: Roger Lucas Acked-by: Guenter Roeck Acked-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

x86, amd_nb: Export model 0x10 and later PCI id

2012-06-07T10:43:41Z

Add the F3 PCI id of F15h, model 0x10 to pci_ids.h and to the amd_nb code which generates the list of northbridges on an AMD box. Shorten define name while at it so that it fits into pci_ids.h. Acked-by: Clemens Ladisch Cc: Bjorn Helgaas Acked-by: Andreas Herrmann Signed-off-by: Borislav Petkov

hwmon: use module_pci_driver

2012-05-21T02:41:48Z

This patch converts the drivers in drivers/hwmon/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin Cc: Andreas Herrmann Cc: Clemens Ladisch Cc: Rudolf Marek Signed-off-by: Guenter Roeck

hwmon: (k10temp) Add support for AMD Trinity CPUs

2012-04-01T17:25:56Z

The on-chip northbridge's temperature sensor of the upcoming AMD Trinity CPUs works the same as for the previous CPUs. Since it has a different PCI-ID, we just add the new one to the list supported by k10temp. This allows to use the k10temp driver on those CPUs. Signed-off-by: Andre Przywara Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck