kernel.git/drivers/hwmon/emc1403.c, branch linux-3.2.yHosts the 0x221E linux distro kernel.
https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-3.2.y2014-06-09T12:29:11Zhwmon: (emc1403) Support full range of known chip revision numbers2014-06-09T12:29:11ZJosef Gajdusek2014-05-12T11:48:26Zurn:sha1:66af111e424ad553c5f6823b53f45a9d2eb11d10
commit 3a18e1398fc2dc9c32bbdc50664da3a77959a8d1 upstream.
The datasheet for EMC1413/EMC1414, which is fully compatible to
EMC1403/1404 and uses the same chip identification, references revision
numbers 0x01, 0x03, and 0x04. Accept the full range of revision numbers
from 0x01 to 0x04 to make sure none are missed.
Signed-off-by: Josef Gajdusek <atx@atx.name>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (emc1403) fix inverted store_hyst()2014-06-09T12:29:11ZJosef Gajdusek2014-05-11T12:40:44Zurn:sha1:73b674fba353d3e37c1d26d5f5e5a34fa4104a9b
commit 17c048fc4bd95efea208a1920f169547d8588f1f upstream.
Attempts to set the hysteresis value to a temperature below the target
limit fails with "write error: Numerical result out of range" due to
an inverted comparison.
Signed-off-by: Josef Gajdusek <atx@atx.name>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
[Guenter Roeck: Updated headline and description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
hwmon: (emc1403) Fix I2C address range2011-02-09T21:45:52ZGuenter Roeck2011-02-09T19:51:29Zurn:sha1:bcf721d14d881da86a8defa96bdc9492abe191ae
I2C address range included 0x2a, which the chips do not support.
Replace with 0x29 which is supported but was missing.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
hwmon: (emc1403) Add EMC1423 support2011-01-12T20:55:12ZJekyll Lai2011-01-12T20:55:12Zurn:sha1:7a1b76f2a46016809c7bcacf81e89948cc306703
EMC1423 uses the similar register and adds a hardware shutdown pin to
protect exceed temperature. This function is set by resistor; it's not
necessary to do anything in the driver except add the emc1423 pid of 0x23.
Signed-off-by: Jekyll Lai <jekyll_lai@wistron.com>
[Updated Kconfig/comments and minor further changes asked for by the hwmon
maintainers]
Signed-off-by: Alan Cox <alan@linux.intel.com>
[Fixed checkpatch warning]
Signed-of--by: Jean Delvare <khali@linux-fr.org>
hwmon: (emc1403) Remove unnecessary hwmon_device_unregister2010-09-17T15:24:12ZYong Wang2010-09-17T15:24:12Zurn:sha1:f17c811d1433aa1966f9c5a744841427e9a97ecf
It is unnecessary and wrong to call hwmon_device_unregister in error
handling before hwmon_device_register is called.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
hwmon: (emc1403) Add power support2010-08-14T19:08:49ZAlan Cox2010-08-14T19:08:49Zurn:sha1:960f12f4d1eb5ba3c76dc6b57a909a65dd59e1c2
Add back the power interface we lost due to a slight misunderstanding of
the maintainers wishes.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
hwmon: EMC1403 thermal sensor support2010-05-27T17:58:56ZKalhan Trisal2010-05-27T17:58:56Zurn:sha1:dac6831e67e90d1cee430a66e7390e753c20d835
Provides support for the EMC1403 thermal sensor. Only reporting of values
is supported. The various Moorestown specific extras to do with thermal
alerts and the like are not in this version of the driver.
Considerably edited and tidied up by Alan Cox, plus fixes and detection
bits from Jean Delvare.
Signed-off-by: Kalhan Trisal <kalhan.trisal@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>