kernel.git/drivers/hwmon/Makefile, branch linux-6.4.y

hwmon: (sfctemp) Add StarFive JH71x0 temperature sensor

2023-04-19T14:08:39Z

Add driver for the StarFive JH71x0 temperature sensor. You can enable/disable it and read temperature in milli Celcius through sysfs. Signed-off-by: Emil Renner Berthing Co-developed-by: Samin Guo Signed-off-by: Samin Guo Signed-off-by: Hal Feng Link: https://lore.kernel.org/r/20230321022644.107027-3-hal.feng@starfivetech.com Signed-off-by: Guenter Roeck

hwmon: fix typo in Makefile

2023-04-19T14:08:39Z

Fix the spelling of "ACPI" in Makefile. Signed-off-by: James Seo Link: https://lore.kernel.org/r/20230405073056.53466-3-james@equiv.tech Signed-off-by: Guenter Roeck

Merge tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2023-02-22T19:31:09Z

Pull hwmon updates from Guenter Roeck: "New drivers: - Infineon TDA38640 Voltage Regulator - NXP MC34VR500 PMIC - GXP fan controller - MPQ7932 Power Management IC New chip or board support added to existing drivers: - it87: IT87952E; also other cleanup/improvements - intel-m10-bmc-hwmon: N6000 - pmbus/max16601: MAX16600 - aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer Poweradjust 3, Aquacomputer Aquaero - nct6775: Support for B650/B660/X670 ASUS boards - oxp-sensors: AYANEO AIR and AIR Pro Other notable changes: - Various kernel documentation fixes - Various devicetree bindings fixes - Explicitly deprecated [devm_]hwmon_device_register_with_groups - ftsteutates: Support for fanX_fault and other cleanup - ltc2945: Support for setting shunt resistor and other cleanup/fixes - coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify platform device handling ... and various other minor cleanups and fixes" * tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits) hwmon: Deprecate [devm_]hwmon_device_register_with_groups hwmon: (mlxreg-fan) Return zero speed for broken fan hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource() hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3 hwmon: (iio_hwmon) use dev_err_probe hwmon: intel-m10-bmc-hwmon: Add N6000 sensors Docs/hwmon/index: Add missing SPDX License Identifier hwmon: (it87) Updated documentation for recent updates to it87 hwmon: (it87) Add new chipset IT87952E hwmon: (it87) Allow multiple chip IDs for force_id hwmon: (it87) Add chip_id in some info message hwmon: (it87) List full chip model name hwmon: (it87) Disable configuration exit for certain chips hwmon: (it87) Allow disabling exiting of configuration mode Documentation: hwmon: correct spelling hwmon: (pmbus/max16601) Add support for MAX16600 hwmon: (ltc2945) Allow setting shunt resistor hwmon: (ltc2945) Handle error case in ltc2945_value_store hwmon: (ltc2945) Add devicetree match table ...

hwmon: add initial NXP MC34VR500 PMIC monitoring support

2023-02-03T15:30:10Z

Add initial monitoring support for the MC34VR500 PMIC. In its current state, input voltage and temperature alarms are reported to hwmon. Datasheet: - https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf Signed-off-by: Mario Kicherer Link: https://lore.kernel.org/r/20230118123019.3041303-4-dev@kicherer.org [groeck: Silence stray compiler warning, terminate struct of_device_id] Signed-off-by: Guenter Roeck

hwmon: (gxp-fan-ctrl) Add GXP fan controller

2023-02-03T15:30:09Z

The GXP SoC can support up to 16 fans through the interface provided by the CPLD. The current support is limited to 8 fans. The fans speeds are controlled via 8 different PWMs which can vary in value from 0-255. The fans are also capable of reporting if they have failed to the CPLD which in turn reports the status to the GXP SoC. Signed-off-by: Nick Hawkins Link: https://lore.kernel.org/r/20230103203654.59322-2-nick.hawkins@hpe.com [groeck: Improved alignment of defined, added missing include linux/bits.h] Signed-off-by: Guenter Roeck

hwmon: remove s3c driver

2023-01-16T08:26:05Z

The s3c adc driver was removed along with the s3c24xx platform, so the hwmon driver is orphaned and can be removed. Acked-by: Guenter Roeck Signed-off-by: Arnd Bergmann

hwmon: add OneXPlayer mini AMD sensors driver

2022-12-05T00:45:02Z

Sensors driver for OXP Handhelds from One-Netbook that expose fan reading and control via hwmon sysfs. As far as I could gather all OXP boards have the same DMI strings and they can be told appart only by the boot cpu vendor (Intel/AMD). Currently only AMD boards are supported since Intel have different EC registers and values to read/write. Fan control is provided via pwm interface in the range [0-255]. AMD boards have [0-100] as range in the EC, the written value is scaled to accommodate for that. Signed-off-by: Joaquín Ignacio Aramendía Link: https://lore.kernel.org/r/20221104140659.593608-1-samsagax@gmail.com [groeck: Removed misleading comment about module_platform_driver()] Signed-off-by: Guenter Roeck

hwmon: Add Ampere's Altra smpro-hwmon driver

2022-12-05T00:45:02Z

This commit adds support for Ampere SMpro hwmon driver. This driver supports accessing various CPU sensors provided by the SMpro co-processor including temperature, power, voltages, and current. Signed-off-by: Quan Nguyen Link: https://lore.kernel.org/r/20220929094321.770125-2-quan@os.amperecomputing.com Signed-off-by: Guenter Roeck

drivers: hwmon: Add max31760 fan speed controller driver

2022-09-20T14:10:58Z

MAX31760 is a precision fan speed controller with nonvolatile lookup table. Device has one internal and one external temperature sensor support. Controls two fans and measures their speeds. Generates hardware alerts when programmable max and critical temperatures are exceeded. Signed-off-by: Ibrahim Tilki Reviewed-by: Nurettin Bolucu Link: https://lore.kernel.org/r/20220910171945.48088-2-Ibrahim.Tilki@analog.com Signed-off-by: Guenter Roeck

hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.

2022-09-19T13:17:06Z

Add driver for Microchip EMC2301/2/3/5 RPM-based PWM Fan Speed Controller. Modify Makefile and Kconfig to support Microchip EMC2305 RPM-based PWM Fan Speed Controller. Signed-off-by: Michael Shych Reviewed-by: Vadim Pasternak Link: https://lore.kernel.org/r/20220810171552.56417-3-michaelsh@nvidia.com [groeck: Drop unnecessary () around DIV_ROUND_CLOSEST()] Signed-off-by: Guenter Roeck