kernel.git/drivers/hwmon/Kconfig, branch linux-5.5.y

Merge tag 'hwmon-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2019-11-27T17:58:49Z

Pull hwmon updates from Guenter Roeck: - Add support for Texas Instruments TMP512/513 - Add support for LTC2947 - Add support for BEL PFE1100 and PFE3000 - Various minor improvements and fixes * tag 'hwmon-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: dell-smm-hwmon: Add documentation hwmon: (dell-smm) Add support for disabling automatic BIOS fan control hwmon: Add driver for Texas Instruments TMP512/513 sensor chips. dt-bindings: hwmon: Add TMP512/513 docs: hwmon: Document bel-pfe pmbus driver hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000 dt-bindings: hwmon: Add ltc2947 documentation hwmon: Add support for ltc2947 hwmon: (ina3221) Add summation feature support hwmon: (tmp421) Allow reading at 2Hz instead of 0.5Hz hwmon: (w83793d) remove redundant assignment to variable res hwmon: (pmbus/ibm-cffps) Add version detection capability dt-bindings: hwmon: Document ibm,cffps compatible string hwmon: abituguru: make array probe_order static, makes object smaller hwmon: (applesmc) switch to using input device polling mode hwmon: (aspeed-pwm-tacho) Use devm_platform_ioremap_resource() in aspeed_pwm_tacho_probe() hwmon: (pmbus/ibm-cffps) Fix LED blink behavior hwmon: (pmbus/ibm-cffps) Switch LEDs to blocking brightness call

hwmon: Add driver for Texas Instruments TMP512/513 sensor chips.

2019-11-22T05:26:40Z

TI's TMP512/513 are I2C/SMBus system monitor chips. These chips monitor the supply voltage, supply current, power consumption and provide one local and up to three (TMP513) remote temperature sensors. It has been tested using a TI TMP513 development kit (TMP513EVM) Signed-off-by: Eric Tremblay Link: https://lore.kernel.org/r/20191112223001.20844-3-etremblay@distech-controls.com Signed-off-by: Guenter Roeck

hwmon: Add support for ltc2947

2019-11-06T22:37:19Z

The ltc2947 is a high precision power and energy monitor with an internal sense resistor supporting up to +/- 30A. Three internal no Latency ADCs ensure accurate measurement of voltage and current, while high-bandwidth analog multiplication of voltage and current provides accurate power measurement in a wide range of applications. Internal or external clocking options enable precise charge and energy measurements. Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20191021154115.319073-1-nuno.sa@analog.com [groeck: Removed unnecessary checks when reading temperature and energy; PAGE{0,1} -> LTC2947_PAGE_{0,1}] Signed-off-by: Guenter Roeck

hwmon: (applesmc) switch to using input device polling mode

2019-11-06T22:37:18Z

Now that instances of input_dev support polling mode natively, we no longer need to create input_polled_dev instance. Signed-off-by: Dmitry Torokhov Link: https://lore.kernel.org/r/20191002214345.GA108728@dtor-ws Signed-off-by: Guenter Roeck

hwmon: ab8500: Convert to IIO ADC

2019-10-18T18:37:08Z

This switches the AB8500 hardware monitor driver to using the standard IIO ADC channel lookup and conversion routines. Acked-by: Guenter Roeck Acked-by: Jonathan Cameron Signed-off-by: Linus Walleij Signed-off-by: Jonathan Cameron

Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-09-22T16:30:30Z

Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...

hwmon: (shtc1) add support for the SHTC3 sensor

2019-09-10T18:42:56Z

Add support for the Sensirion SHTC3 humidity and temperature sensor to the shtc1 module. Signed-off-by: Dan Robertson Link: https://lore.kernel.org/r/20190905014554.21658-2-dan@dlrobertson.com Signed-off-by: Guenter Roeck

hwmon: Add Synaptics AS370 PVT sensor driver

2019-09-03T19:47:17Z

Add a new driver for Synaptics AS370 PVT sensors. Currently, only temperature is supported. Signed-off-by: Jisheng Zhang Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190827113259.4fb64a17@xhacker.debian Signed-off-by: Guenter Roeck

hwmon: w83795: Fan control option isn't that dangerous

2019-09-03T19:47:17Z

I have been using SENSORS_W83795_FANCTRL for several years and never had any problem. When the driver was added, I had not tested that part of the driver yet so I wanted to be super cautious, but time has shown that it works just fine. In the long run I even believe that we should drop the option and enable the feature unconditionally. It doesn't do anything until the user explicitly starts twiddling with sysfs attributes anyway. Signed-off-by: Jean Delvare Link: https://lore.kernel.org/r/20190806102123.3118bcc5@endymion Signed-off-by: Guenter Roeck

hwmon: Remove ads1015 driver

2019-09-03T19:47:17Z

A driver for ADS1015 with more functionality is available in the iio subsystem. Remove the hwmon driver as duplicate. If the chip is used for hardware monitoring, the iio->hwmon bridge should be used. Cc: Dirk Eibach Link: https://lore.kernel.org/r/1562004758-13025-1-git-send-email-linux@roeck-us.net Acked-by: Jonathan Cameron Acked-by: Rob Herring Signed-off-by: Guenter Roeck