kernel.git/drivers/hwmon/Kconfig, branch linux-5.4.y

hwmon: (ltq-cputemp) restrict it to SOC_XWAY

2022-05-18T07:47:25Z

[ Upstream commit 151d6dcbed836270c6c240932da66f147950cbdb ] Building with SENSORS_LTQ_CPUTEMP=y with SOC_FALCON=y causes build errors since FALCON does not support the same features as XWAY. Change this symbol to depend on SOC_XWAY since that provides the necessary interfaces. Repairs these build errors: ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_enable': ../drivers/hwmon/ltq-cputemp.c:23:9: error: implicit declaration of function 'ltq_cgu_w32'; did you mean 'ltq_ebu_w32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c:23:21: error: implicit declaration of function 'ltq_cgu_r32'; did you mean 'ltq_ebu_r32'? [-Werror=implicit-function-declaration] 23 | ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ../drivers/hwmon/ltq-cputemp.c: In function 'ltq_cputemp_probe': ../drivers/hwmon/ltq-cputemp.c:92:31: error: 'SOC_TYPE_VR9_2' undeclared (first use in this function) 92 | if (ltq_soc_type() != SOC_TYPE_VR9_2) Fixes: 7074d0a92758 ("hwmon: (ltq-cputemp) add cpu temp sensor driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Florian Eckert Cc: Guenter Roeck Cc: Jean Delvare Cc: linux-hwmon@vger.kernel.org Link: https://lore.kernel.org/r/20220509234740.26841-1-rdunlap@infradead.org Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (lm90) Add basic support for TI TMP461

2021-12-29T11:23:35Z

[ Upstream commit f8344f7693a25d9025a59d164450b50c6f5aa3c0 ] TMP461 is almost identical to TMP451 and was actually detected as TMP451 with the existing lm90 driver if its I2C address is 0x4c. Add support for it to the lm90 driver. At the same time, improve the chip detection function to at least try to distinguish between TMP451 and TMP461. As a side effect, this fixes commit 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations"). TMP461 does not support word operations on temperature registers, which causes bad temperature readings with the tmp401 driver. The lm90 driver does not perform word operations on temperature registers and thus does not have this problem. Support is listed as basic because TMP461 supports a sensor resolution of 0.0625 degrees C, while the lm90 driver assumes a resolution of 0.125 degrees C. Also, the TMP461 supports negative temperatures with its default temperature range, which is not the case for similar chips supported by the lm90 and the tmp401 drivers. Those limitations will be addressed with follow-up patches. Fixes: 24333ac26d01 ("hwmon: (tmp401) use smb word operations instead of 2 smb byte operations") Reported-by: David T. Wilson Cc: David T. Wilson Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (lm90) Add max6654 support to lm90 driver

2021-12-29T11:23:35Z

[ Upstream commit 229d495d8189ae785dacee72e5633a58edc25ddf ] Add support for the Maxim MAX6654 to the lm90 driver. The MAX6654 is a temperature sensor, similar to the others, but with some differences regarding the configuration register, and the sampling rate at which extended resolution becomes possible. Signed-off-by: Josh Lehan Link: https://lore.kernel.org/r/20200513184248.145765-1-krellan@google.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2019-09-22T16:30:30Z

Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...

hwmon: (shtc1) add support for the SHTC3 sensor

2019-09-10T18:42:56Z

Add support for the Sensirion SHTC3 humidity and temperature sensor to the shtc1 module. Signed-off-by: Dan Robertson Link: https://lore.kernel.org/r/20190905014554.21658-2-dan@dlrobertson.com Signed-off-by: Guenter Roeck

hwmon: Add Synaptics AS370 PVT sensor driver

2019-09-03T19:47:17Z

Add a new driver for Synaptics AS370 PVT sensors. Currently, only temperature is supported. Signed-off-by: Jisheng Zhang Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20190827113259.4fb64a17@xhacker.debian Signed-off-by: Guenter Roeck

hwmon: w83795: Fan control option isn't that dangerous

2019-09-03T19:47:17Z

I have been using SENSORS_W83795_FANCTRL for several years and never had any problem. When the driver was added, I had not tested that part of the driver yet so I wanted to be super cautious, but time has shown that it works just fine. In the long run I even believe that we should drop the option and enable the feature unconditionally. It doesn't do anything until the user explicitly starts twiddling with sysfs attributes anyway. Signed-off-by: Jean Delvare Link: https://lore.kernel.org/r/20190806102123.3118bcc5@endymion Signed-off-by: Guenter Roeck

hwmon: Remove ads1015 driver

2019-09-03T19:47:17Z

A driver for ADS1015 with more functionality is available in the iio subsystem. Remove the hwmon driver as duplicate. If the chip is used for hardware monitoring, the iio->hwmon bridge should be used. Cc: Dirk Eibach Link: https://lore.kernel.org/r/1562004758-13025-1-git-send-email-linux@roeck-us.net Acked-by: Jonathan Cameron Acked-by: Rob Herring Signed-off-by: Guenter Roeck

hwmon: Drop obsolete JZ4740 driver

2019-07-30T17:41:54Z

The JZ4740 boards now use the iio-hwmon driver. Signed-off-by: Paul Cercueil Tested-by: Artur Rojek Acked-by: Guenter Roeck Signed-off-by: Paul Burton

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman