kernel.git/drivers/hwmon/Kconfig, branch linux-4.8.y

hwmon: Add driver for FTS BMC chip "Teutates"

2016-07-20T13:29:54Z

This driver implements hardware monitoring and watchdog support for the FTS BMC Chip "Teutates". Signed-off-by: Thilo Cestonaro [groeck: Updated subject and description; fixed dependencies] Signed-off-by: Guenter Roeck

hwmon: (tmp102) Convert to use regmap, and drop local cache

2016-07-12T21:24:14Z

By converting the driver to regmap, we can use regmap to cache non-volatile registers. Stop caching the temperature register; while potentially reading it more often can result in reading it more often than necessary, this is offset by the gain due to not re-reading the limit registers. A positive side effect of this change is that limit registers can now be read and updated before the first temperature conversion is complete. Acked-by: Nishanth Menon Signed-off-by: Guenter Roeck

hwmon: (lm75) Convert to use regmap

2016-07-09T15:33:47Z

Convert to use regmap. Leave caching to regmap and drop the register update function. While this can result in additional read operations if the temperature register is read continuously, it avoids re-reading the limit registers and thus overall reduces complexity. Signed-off-by: Guenter Roeck

hwmon: (jc42) Add support for Microchip MCP9808 temperature sensor

2016-06-28T01:58:04Z

MCP9808 is not officially compliant to JC-42, similar to MCP9804, but its registers are compatible to JC-42. Signed-off-by: Alison Schofield Cc: Daniel Baluta Signed-off-by: Guenter Roeck

hwmon: Add support for INA3221 Triple Current/Voltage Monitors

2016-06-28T01:58:03Z

Add support for the the INA3221 26v capable, Triple channel, Bi-Directional, Zero-Drift, Low-/High-Side, Current/Voltage Monitor with I2C interface. Signed-off-by: Andrew F. Davis Signed-off-by: Guenter Roeck

hwmon: (tmp401) Add support for TI TMP461

2016-06-28T01:58:03Z

Signed-off-by: Andrew F. Davis Signed-off-by: Guenter Roeck

hwmon: add support for Sensirion SHT3x sensors

2016-06-28T01:58:03Z

This driver implements support for the Sensirion SHT3x-DIS chip, a humidity and temperature sensor. Temperature is measured in degrees celsius, relative humidity is expressed as a percentage. In the sysfs interface, all values are scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500. Signed-off-by: Pascal Sachs [groeck: Fixed 'Variable length array is used' gcc warning] Signed-off-by: Guenter Roeck

hwmon: (it87) Add support for IT8628E

2016-04-19T13:32:38Z

IT8628E is functionally identical to IT8620E. Tested-by: Martin Blumenstingl Signed-off-by: Guenter Roeck

hwmon: (fam15h_power) Add CPU_SUP_AMD as the dependence

2016-04-19T13:32:34Z

This patch adds CONFIG_CPU_SUP_AMD as the dependence of fam15h_power driver. Because the following patch will use the interface from x86/kernel/cpu/amd.c. Otherwise, the below error might be encountered: All errors (new ones prefixed by >>): drivers/built-in.o: In function `fam15h_power_probe': >> fam15h_power.c:(.text+0x26e3a3): undefined reference to >> `amd_get_cores_per_cu' fam15h_power.c:(.text+0x26e41e): undefined reference to `amd_get_cores_per_cu' Reported-by: build test robot Acked-by: Borislav Petkov Signed-off-by: Huang Rui Signed-off-by: Guenter Roeck

hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors

2016-04-19T13:32:34Z

Add basic support for the Maxim Integrated MAX31722/MAX31723 SPI temperature sensors / thermostats. Includes: - ACPI support; - raw temperature readings; - power management Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf Signed-off-by: Tiberiu Breana Signed-off-by: Guenter Roeck