kernel.git/drivers/hwmon/Kconfig, branch linux-4.15.y

hwmon: (gpio-fan) Mandate OF_GPIO and cut pdata path

2017-10-30T01:36:03Z

We have no users of platform data, we made platform data driver-local, so cut all #ifdefs for the platform data case, and depend on the Kconfig CONFIG_OF_GPIO symbol. Signed-off-by: Linus Walleij Signed-off-by: Guenter Roeck

hwmon: (max6621) Add support for Maxim MAX6621 temperature sensor

2017-10-30T01:36:03Z

MAX6621 is a PECI-to-I2C translator provides an efficient, low-cost solution for PECI-to-SMBus/I2C protocol conversion. It allows reading the temperature from the PECI-compliant host directly from up to four PECI-enabled CPUs. Signed-off-by: Vadim Pasternak Signed-off-by: Guenter Roeck

hwmon: (ltq-cputemp) add cpu temp sensor driver

2017-09-01T14:24:14Z

Add the lantiq cpu temperature sensor support for xrx200. Signed-off-by: Florian Eckert Signed-off-by: Guenter Roeck

hwmon: (aspeed-pwm) add THERMAL dependency

2017-08-15T14:54:34Z

With CONFIG_THERMAL=m, a built-in aspeed pwm tacho driver causes a link error: drivers/hwmon/aspeed-pwm-tacho.o: In function `aspeed_pwm_tacho_probe': aspeed-pwm-tacho.c:(.text+0x7f0): undefined reference to `thermal_of_cooling_device_register' This adds a dependency similar to what other hwmon drivers use, ensuring that the aspeed driver cannot be built-in in this case but has to be a module. With THERMAL=n, we still allow building it. Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Arnd Bergmann Signed-off-by: Guenter Roeck

hwmon: (aspeed-pwm-tacho) Select REGMAP

2017-05-30T22:15:19Z

The driver uses regmap and thus has to select it to avoid build errors such as the following. drivers/hwmon/aspeed-pwm-tacho.c:337:21: error: variable 'aspeed_pwm_tacho_regmap_config' has initializer but incomplete type Reported-by: kbuild test robot Acked-by: Joel Stanley Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck

hwmon: (twl4030-madc) drop driver

2017-04-30T18:45:31Z

This driver is no longer needed: * It has no mainline users * It has no DT support and OMAP is DT only * iio-hwmon can be used for madc, which also works with DT Signed-off-by: Sebastian Reichel Acked-by: Guenter Roeck Signed-off-by: Guenter Roeck

drivers: hwmon: Support for ASPEED PWM/Fan tach

2017-04-10T20:12:18Z

The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports. The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer inputs. The device driver matches on the device tree node. The configuration values are read from the device tree and written to the respective registers. The driver provides a sysfs entries through which the user can configure the duty-cycle value (ranging from 0 to 100 percent) and read the fan tach rpm value. Signed-off-by: Jaghathiswari Rankappagounder Natarajan Signed-off-by: Guenter Roeck

hwmon: new driver for ST stts751 thermal sensor

2017-02-03T13:32:59Z

This patch adds a HWMON driver for ST Microelectronics STTS751 temperature sensors. Thanks-to: LABBE Corentin [for suggestions] Thanks-to: Guenter Roeck [for suggestion and discussions] Signed-off-by: Andrea Merello Cc: LABBE Corentin Signed-off-by: Guenter Roeck

hwmon: Add Texas Instruments TMP108 temperature sensor driver.

2016-12-10T05:54:25Z

Add support for the TI TMP108 temperature sensor with some device configuration parameters. Signed-off-by: John Muir [groeck: Initialize of_match_table] Signed-off-by: Guenter Roeck

hwmon: (lm90) Mention support for TI TMP451 in Kconfig description

2016-12-10T05:54:14Z

The lm90 driver also supports the Texas Instruments TMP451 sensor chip. Since the Kconfig description for the driver includes a list of all compatible chips, mention the TI TMP451 there as well. Signed-off-by: Tobias Klauser Signed-off-by: Guenter Roeck