kernel.git/drivers/hwmon/Kconfig, branch linux-3.19.y

hwmon: (i5500_temp) New driver for the Intel 5500/5520/X58 chipsets

2015-01-24T13:16:21Z

The Intel 5500, 5520 and X58 chipsets embed a digital thermal sensor. This new driver supports it. Note that on many boards the sensor seems to be disabled and reports the minimum value (36.5 degrees Celsius) all the time. Signed-off-by: Jean Delvare Tested-by: Romain Dolbeau Reviewed-by: Guenter Roeck

hwmon: (tmp401) Add support for TI TMP435

2014-12-04T18:59:42Z

Signed-off-by: Patrick Titiano [Bartosz Golaszewski: prepared for submission, code review fixes] Signed-off-by: Bartosz Golaszewski [Guenter Roeck: Merged two patches into one] Signed-off-by: Guenter Roeck

hwmon: (lm95234) Add support for LM95233

2014-12-02T14:11:53Z

LM95233 is similar to LM95234, but it only supports two instead of four external temperature sensors. Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck

hwmon: (lm95245) Add support for LM95235

2014-12-02T11:44:18Z

LM95235 is register compatible to LM95245. Also update link to LM95245 data sheet, and drop the link to the datasheet from the driver source to simplify code maintenance. Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck

hwmon: (nct6775) Add support for NCT6792D

2014-12-01T04:13:13Z

NCT6792D is similar to NCT6791D. Only beep control and temperature monitoring registers are different. Reviewed-by: Jean Delvare Signed-off-by: Guenter Roeck

hwmon: Driver for Nuvoton NCT7802Y

2014-12-01T04:13:13Z

NCT7802Y is an I2C based hardware monitoring chip from Nuvoton. Signed-off-by: Guenter Roeck

Merge tag 'mfd-hwmon-leds-watchdog-v3.18' into hwmon-next

2014-09-24T16:25:06Z

Immutable branch between MFD, HWMON, LEDs and Watchdog for v3.18

hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver

2014-09-24T14:36:33Z

Added driver to support the 14F021P00 BMC Hardware Monitoring. The BMC is a Board Management Controller including monitoring of the board voltages. Signed-off-by: Andreas Werner Reviewed-by: Guenter Roeck Signed-off-by: Lee Jones

hwmon: (ntc_thermistor) Add ntc thermistor to thermal subsystem as a sensor.

2014-09-22T18:14:52Z

To get more comprehensive and integrated thermal management, it adds ntc thermistor to thermal framework as a thermal sensor. It's governed thermal susbsystem only if it is described in DT node. Otherwise, it just notifies temperature to userspace via sysfs as it used to be. Signed-off-by: Jonghwa Lee Signed-off-by: Guenter Roeck

hwmon: (k10temp) Add support for F15h M60h

2014-09-22T18:14:52Z

This patch adds temperature monitoring support for F15h M60h processor. - Add new pci device id for the relevant processor - The functionality of REG_REPORTED_TEMPERATURE is moved to D0F0xBC_xD820_0CA4 [Reported Temperature Control] - So, use this to get CUR_TEMP value - Since we need an indirect register access, protect this with a mutex lock - Add Kconfig, Doc entries to indicate support for this processor. Signed-off-by: Aravind Gopalakrishnan Acked-by: Borislav Petkov Acked-by: Clemens Ladisch [Guenter Roeck: Declare new mutex and function static] Signed-off-by: Guenter Roeck