kernel.git/drivers/hwmon/Kconfig, branch linux-3.15.y

hwmon: (ntc_thermistor) Fix dependencies

2014-05-25T15:23:08Z

In commit 9e8269de, support was added for ntc_thermistor devices being declared in the device tree and implemented on top of IIO. With that change, a dependency was added to the ntc_thermistor driver: depends on (!OF && !IIO) || (OF && IIO) This construct has the drawback that the driver can no longer be selected when OF is set and IIO isn't, nor when IIO is set and OF is not. This is a regression for the original users of the driver. As the new code depends on IIO and is useless without OF, include it only if both are enabled, and set the dependencies accordingly. This is clearer, more simple and more correct. Signed-off-by: Jean Delvare Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver Reviewed-by: Guenter Roeck Cc: Naveen Krishna Chatradhi Cc: Doug Anderson

Revert "powerpc/powernv: hwmon driver for power values, fan rpm and temperature"

2014-04-09T02:56:37Z

This reverts commit 0de7f8a917b5202014430e0055c0e1db0348bd62. This driver wasn't merged via the proper maintainers (my fault ... ooops !) and has serious issues so let's take it out for now and have a new better one be merged the right way Signed-off-by: Benjamin Herrenschmidt ---

hwmon: (k10temp) Add support for AMD F16 M30h processor

2014-04-03T05:09:14Z

Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify Kconfig and Doc files to reflect the support for newer processors Note: PCI ID for this processor will make it into pci_ids.h as part of this patch: http://marc.info/?l=linux-kernel&m=139291362126057&w=2 which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git- https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next) Signed-off-by: Aravind Gopalakrishnan Signed-off-by: Guenter Roeck

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2014-04-02T20:42:59Z

Pull main powerpc updates from Ben Herrenschmidt: "This time around, the powerpc merges are going to be a little bit more complicated than usual. This is the main pull request with most of the work for this merge window. I will describe it a bit more further down. There is some additional cpuidle driver work, however I haven't included it in this tree as it depends on some work in tip/timer-core which Thomas accidentally forgot to put in a topic branch. Since I didn't want to carry all of that tip timer stuff in powerpc -next, I setup a separate branch on top of Thomas tree with just that cpuidle driver in it, and Stephen has been carrying that in next separately for a while now. I'll send a separate pull request for it. Additionally, two new pieces in this tree add users for a sysfs API that Tejun and Greg have been deprecating in drivers-core-next. Thankfully Greg reverted the patch that removes the old API so this merge can happen cleanly, but once merged, I will send a patch adjusting our new code to the new API so that Greg can send you the removal patch. Now as for the content of this branch, we have a lot of perf work for power8 new counters including support for our new "nest" counters (also called 24x7) under pHyp (not natively yet). We have new functionality when running under the OPAL firmware (non-virtualized or KVM host), such as access to the firmware error logs and service processor dumps, system parameters and sensors, along with a hwmon driver for the latter. There's also a bunch of bug fixes accross the board, some LE fixes, and a nice set of selftests for validating our various types of copy loops. On the Freescale side, we see mostly new chip/board revisions, some clock updates, better support for machine checks and debug exceptions, etc..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits) powerpc/book3s: Fix CFAR clobbering issue in machine check handler. powerpc/compat: 32-bit little endian machine name is ppcle, not ppc powerpc/le: Big endian arguments for ppc_rtas() powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n) powerpc/defconfigs: Enable THP in pseries defconfig powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split powerpc: Rate-limit users spamming kernel log buffer powerpc/perf: Fix handling of L3 events with bank == 1 powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes powerpc/perf: Add kconfig option for hypervisor provided counters powerpc/perf: Add support for the hv 24x7 interface powerpc/perf: Add support for the hv gpci (get performance counter info) interface powerpc/perf: Add macros for defining event fields & formats powerpc/perf: Add a shared interface to get gpci version and capabilities powerpc/perf: Add 24x7 interface headers powerpc/perf: Add hv_gpci interface header powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info) sysfs: create bin_attributes under the requested group powerpc/perf: Enable BHRB access for EBB events powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB ...

powerpc/powernv: hwmon driver for power values, fan rpm and temperature

2014-03-23T22:48:22Z

This patch adds basic kernel enablement for reading power values, fan speed rpm and temperature values on powernv platforms which will be exported to user space through sysfs interface. Signed-off-by: Shivaprasad G Bhat Signed-off-by: Neelesh Gupta Signed-off-by: Benjamin Herrenschmidt

hwmon: Driver for TI ADC128D818

2014-03-03T16:01:04Z

ADC128D818 is a System Monitor with Temperature Sensor. It is similar to LM80 and LM96080, but has 16 bit wide sensor registers and no fan speed monitoring. Signed-off-by: Guenter Roeck

hwmon: Sort Kconfig entries alphabetically

2014-03-03T16:01:04Z

Entries have been added at more or less random positions over time, so it becomes difficult to find what you are looking for or figure out where to insert new entries. Signed-off-by: Jean Delvare Signed-off-by: Guenter Roeck

hwmon: (ltc4260) Fix trivial typo

2014-03-03T16:01:03Z

Signed-off-by: Axel Lin Signed-off-by: Guenter Roeck

hwmon: Driver for Linear Technologies LTC2945

2014-03-03T16:01:03Z

LTC2945 is a system monitor that measures current, voltage, and power. Signed-off-by: Guenter Roeck

hwmon: Driver for Linear Technologies LTC4260

2014-03-03T16:01:03Z

LTC4260 is a Positive Voltage Hot Swap Controller. The driver currently only supports voltage monitoring, not voltage control. Signed-off-by: Guenter Roeck