kernel.git/drivers/hid/hid-core.c, branch linux-6.3.y

Merge tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2023-03-09T18:17:23Z

Pull HID fixes from Benjamin Tissoires: - fix potential out of bound write of zeroes in HID core with a specially crafted uhid device (Lee Jones) - fix potential use-after-free in work function in intel-ish-hid (Reka Norman) - selftests config fixes (Benjamin Tissoires) - few device small fixes and support * tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded selftest: hid: fix hid_bpf not set in config HID: uhid: Over-ride the default maximum data buffer value with our own HID: core: Provide new max_buffer_size attribute to over-ride the default

Merge tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-02-24T20:58:55Z

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...

HID: core: Provide new max_buffer_size attribute to over-ride the default

2023-02-23T10:51:56Z

Presently, when a report is processed, its proposed size, provided by the user of the API (as Report Size * Report Count) is compared against the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some low-level HID drivers allocate a reduced amount of memory to their buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending this check inadequate in some cases. In these circumstances, if the received report ends up being smaller than the proposed report size, the remainder of the buffer is zeroed. That is, the space between sizeof(csize) (size of the current report) and the rsize (size proposed i.e. Report Size * Report Count), which can be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset() shoots straight past the end of the buffer boundary and starts zeroing out in-use values, often resulting in calamity. This patch introduces a new variable into 'struct hid_ll_driver' where individual low-level drivers can over-ride the default maximum value of HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the interface. Signed-off-by: Lee Jones Signed-off-by: Jiri Kosina

Merge branch 'for-6.3/hid-bpf' into for-linus

2023-02-22T09:44:31Z

Initial support of HID-BPF (Benjamin Tissoires) The history is a little long for this series, as it was intended to be sent for v6.2. However some last minute issues forced us to postpone it to v6.3. Conflicts: * drivers/hid/i2c-hid/Kconfig: commit bf7660dab30d ("HID: stop drivers from selecting CONFIG_HID") conflicts with commit 2afac81dd165 ("HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is") the resolution is simple enough: just drop the "default" and "select" lines as the new commit from Arnd is doing

Merge branch 'for-6.3/hid-core' into for-linus

2023-02-22T09:27:57Z

- constify hid_ll_driver (Thomas Weißschuh) - map standard Battery System Charging to upower (José Expósito) - couple of assorted fixes and new handling of HID usages (Jingyuan Liang & Ronald Tschalär)

HID: use standard debug APIs

2023-02-06T14:11:45Z

The custom "debug" module parameter is fairly inflexible. It can only manage debugging for all calls dbg_hid() at the same time. Furthermore it creates a mismatch between calls to hid_dbg() which can be managed by CONFIG_DYNAMIC_DEBUG and dbg_hid() which is managed by the module parameter. Furthermore the change to pr_debug() allows the debugging statements to be completely compiled-out if desired. Signed-off-by: Thomas Weißschuh Tested-by: Bastien Nocera Link: https://lore.kernel.org/r/20221223-hid-dbg-v1-1-5dcf8794f7f9@weissschuh.net Signed-off-by: Benjamin Tissoires

HID: core: Fix deadloop in hid_apply_multiplier.

2023-02-06T09:57:27Z

The initial value of hid->collection[].parent_idx if 0. When Report descriptor doesn't contain "HID Collection", the value remains as 0. In the meanwhile, when the Report descriptor fullfill all following conditions, it will trigger hid_apply_multiplier function call. 1. Usage page is Generic Desktop Ctrls (0x01) 2. Usage is RESOLUTION_MULTIPLIER (0x48) 3. Contain any FEATURE items The while loop in hid_apply_multiplier will search the top-most collection by searching parent_idx == -1. Because all parent_idx is 0. The loop will run forever. There is a Report Descriptor triggerring the deadloop 0x05, 0x01, // Usage Page (Generic Desktop Ctrls) 0x09, 0x48, // Usage (0x48) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0xB1, 0x01, // Feature Signed-off-by: Xin Zhao Link: https://lore.kernel.org/r/20230130212947.1315941-1-xnzhao@google.com Signed-off-by: Benjamin Tissoires

driver core: make struct bus_type.uevent() take a const *

2023-01-27T12:45:52Z

The uevent() callback in struct bus_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Acked-by: Rafael J. Wysocki Acked-by: Hans de Goede Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

HID: Recognize sensors with application collections

2023-01-18T08:53:12Z

According to HUTRR39 logical sensor devices may be nested inside physical collections or may be specified in multiple top-level application collections (see page 59, strategies 1 and 2). However, the current code was only recognizing those with physical collections. This issue turned up in the T2 MacBook Pros which define the ALS in a top-level application collection. Signed-off-by: Ronald Tschalär Signed-off-by: Aditya Garg Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina

HID: check empty report_list in hid_validate_values()

2023-01-17T12:09:59Z

Add a check for empty report_list in hid_validate_values(). The missing check causes a type confusion when issuing a list_entry() on an empty report_list. The problem is caused by the assumption that the device must have valid report_list. While this will be true for all normal HID devices, a suitably malicious device can violate the assumption. Fixes: 1b15d2e5b807 ("HID: core: fix validation of report id 0") Signed-off-by: Pietro Borrello Signed-off-by: Jiri Kosina