Hosts the 0x221E linux distro kernel. https://git.0xinfinity.dev/distro/kernel.git/atom?h=linux-4.10.y 2016-07-16T01:23:50Z 2016-07-16T01:23:50Z Dave Airlie 2016-07-16T01:23:50Z urn:sha1:877fa9a42ddc087dc46a3a3aac18db8adde2bdf1 drm/tegra: Changes for v4.8-rc1 This set of changes contains a bunch of cleanups to the host1x driver as well as the addition of a pin controller for DPAUX, which is required by boards to configure the DPAUX pads in AUX mode (for DisplayPort) or I2C mode (for HDMI and DDC). Included is also a bit of rework of the SOR driver in preparation to add DisplayPort support as well as some refactoring and cleanup. Finally, all output drivers are converted to runtime PM, which greatly simplifies the handling of clocks and resets. * tag 'drm/tegra/for-4.8-rc1' of git://anongit.freedesktop.org/tegra/linux: (35 commits) drm/tegra: sor: Reject HDMI 2.0 modes drm/tegra: sor: Prepare for generic PM domain support drm/tegra: dsi: Prepare for generic PM domain support drm/tegra: sor: Make XBAR configurable per SoC drm/tegra: sor: Use sor1_src clock to set parent for HDMI dt-bindings: display: tegra: Add source clock for SOR drm/tegra: sor: Implement sor1_brick clock drm/tegra: sor: Implement runtime PM drm/tegra: hdmi: Implement runtime PM drm/tegra: dsi: Implement runtime PM drm/tegra: dc: Implement runtime PM drm/tegra: hdmi: Enable audio over HDMI drm/tegra: sor: Do not support deep color modes drm/tegra: sor: Extract tegra_sor_mode_set() drm/tegra: sor: Split out tegra_sor_apply_config() drm/tegra: sor: Rename tegra_sor_calc_config() drm/tegra: sor: Factor out tegra_sor_set_parent_clock() drm/tegra: dpaux: Add pinctrl support dt-bindings: Add bindings for Tegra DPAUX pinctrl driver drm/tegra: Prepare DPAUX for supporting generic PM domains ... 2016-07-04T09:38:11Z Thierry Reding 2015-08-07T14:00:43Z urn:sha1:5234549b93aa2ada9ee3d628b0e06bf291d97577 Use runtime PM to clock-(un)gate and (de)assert reset to the HDMI controller. This ties in nicely with atomic DPMS in that a runtime PM reference is taken before a pipe is enabled and dropped after it has been shut down. Signed-off-by: Thierry Reding <treding@nvidia.com> 2016-07-04T09:34:31Z Thierry Reding 2015-01-15T12:43:18Z urn:sha1:2ccb396e9dd4536cfb7e8c4fd892d215c7aec2b6 In order to use the HDA codec to forward audio data to the HDMI codec it needs the ELD that is parsed from the monitor's EDID. Also implement an interoperability mechanism between the HDA controller and the HDMI codec. This uses vendor-defined scratch registers to pass data from the HDMI codec driver to the HDMI driver (that implements the receiving end of the HDMI codec). A custom format is used to pass audio sample rate and channel count to the HDMI driver. Signed-off-by: Thierry Reding <treding@nvidia.com> 2016-06-10T15:24:48Z Boris Brezillon 2016-06-07T11:48:08Z urn:sha1:26b4ee34e74f230d4b1783b89b2418863d6eb6f2 All outputs have a 1:1 relationship between connectors and encoders and the driver is relying on the atomic helpers: we can drop the custom ->best_encoder() implementation and let the core call drm_atomic_helper_best_encoder() for us. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465300095-16971-14-git-send-email-boris.brezillon@free-electrons.com 2015-12-11T08:13:20Z Ville Syrjälä 2015-12-09T14:20:18Z urn:sha1:13a3d91f17a5f7ed2acd275d18b6acfdb131fb15 Done with coccinelle for the most part. However, it thinks '...' is part of the semantic patch, so I put an 'int DOTDOTDOT' placeholder in its place and got rid of it with sed afterwards. @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ) { ... } @@ identifier dev, encoder, funcs; @@ int drm_encoder_init(struct drm_device *dev, struct drm_encoder *encoder, const struct drm_encoder_funcs *funcs, int encoder_type + ,const char *name, int DOTDOTDOT ); @@ expression E1, E2, E3, E4; @@ drm_encoder_init(E1, E2, E3, E4 + ,NULL ) v2: Add ', or NULL...' to @name kernel doc (Jani) Annotate the function with __printf() attribute (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449670818-2966-1-git-send-email-ville.syrjala@linux.intel.com 2015-08-13T11:49:11Z Thierry Reding 2015-07-29T07:46:40Z urn:sha1:29871b21c48c7b13adbd056755d923394ff6110b In order to restore DPMS with atomic mode-setting, move all code from the ->mode_set() callback into ->enable(). At the same time, rename the ->prepare() callback to ->disable() to use the names preferred by atomic mode-setting. This simplifies the calling sequence and will allow DPMS code to use runtime PM in subsequent patches. Signed-off-by: Thierry Reding <treding@nvidia.com> 2015-08-13T11:47:43Z Thierry Reding 2015-08-05T14:39:55Z urn:sha1:472a6d1fd5f5d37a1c081e69f5c8ad5307ac358f Use an underscore to separate the prefix from the color size suffix. Signed-off-by: Thierry Reding <treding@nvidia.com> 2015-08-13T11:47:43Z Thierry Reding 2015-04-27T12:48:35Z urn:sha1:8fd3ffa902a0d9f282ffa80599970ff1c823b1a8 The horizontal pulse enable bits are named H_PULSE{0,1,2}_ENABLE in the TRM. Modify the driver to use the same naming for consistency. Signed-off-by: Thierry Reding <treding@nvidia.com> 2015-04-02T16:49:23Z Thierry Reding 2015-01-28T15:32:52Z urn:sha1:5c1c071a3667600d1b8426dba031b2d4a20a3efa Name the fields of the SOR_SEQ_CTL register consistently. Signed-off-by: Thierry Reding <treding@nvidia.com> 2015-04-02T16:49:22Z Thierry Reding 2015-01-28T15:14:26Z urn:sha1:375e118437716acdccda224abb3d464ecfe92884 Resets on Tegra are synchronous, so keep the clock enabled while asserting the reset. Signed-off-by: Thierry Reding <treding@nvidia.com>