kernel.git/drivers/gpu/drm/tegra/fb.c, branch linux-4.13.y

Merge tag 'drm/tegra/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2017-05-05T01:47:01Z

drm/tegra: Changes for v4.12-rc1 This contains various fixes to the host1x driver as well as a plug for a leak of kernel pointers to userspace. A fairly big addition this time around is the Video Image Composer (VIC) support that can be used to accelerate some 2D and image compositing operations. Furthermore the driver now supports FB modifiers, so we no longer rely on a custom IOCTL to set those. Finally this contains a few preparatory patches for Tegra186 support which unfortunately didn't quite make it this time, but will hopefully be ready for v4.13. * tag 'drm/tegra/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux: gpu: host1x: Fix host1x driver shutdown gpu: host1x: Support module reset gpu: host1x: Sort includes alphabetically drm/tegra: Add VIC support dt-bindings: Add bindings for the Tegra VIC drm/tegra: Add falcon helper library drm/tegra: Add Tegra DRM allocation API drm/tegra: Add tiling FB modifiers drm/tegra: Don't leak kernel pointer to userspace drm/tegra: Protect IOMMU operations by mutex drm/tegra: Enable IOVA API when IOMMU support is enabled gpu: host1x: Add IOMMU support gpu: host1x: Fix potential out-of-bounds access iommu/iova: Fix compile error with CONFIG_IOMMU_IOVA=m iommu: Add dummy implementations for !IOMMU_IOVA MAINTAINERS: Add related headers to IOMMU section iommu/iova: Consolidate code for adding new node to iovad domain rbtree

drm/tegra: Add tiling FB modifiers

2017-04-05T16:11:46Z

Add FB modifiers to allow user-space to specify that a surface is in one of the two tiling formats supported by Tegra chips, and add support in the tegradrm driver to handle them properly. This is necessary for the display controller to directly display buffers generated by the GPU. This feature is intended to replace the dedicated IOCTL enabled by TEGRA_STAGING and to provide a non-staging alternative to that solution. Signed-off-by: Alexandre Courbot Acked-by: Daniel Vetter Signed-off-by: Thierry Reding

drm/fb-helper: Automatically clean up fb_info

2017-02-07T20:36:28Z

Noticed that everyone duplicates the same logic here and we could safe a few lines per driver. Yay for lots of drivers to make such tiny refactors worth-while! v2: Forgot to git add everything :( v3: Actually remove release_fbi (Sean, Emil, Chris) ... Cc: Chris Wilson Cc: Sean Paul Cc: Noralf Trønnes Cc: Emil Velikov Reviewed-by: Sean Paul Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170207161603.17611-1-daniel.vetter@ffwll.ch

drm: Rely on mode_config data for fb_helper initialization

2017-02-02T18:12:00Z

Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter Signed-off-by: Gabriel Krisman Bertazi Reviewed-by: Eric Anholt Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk

drm/tegra: Stop using drm_framebuffer_unregister_private

2017-01-12T15:37:44Z

This is the deprecated function for when you embedded the framebuffer somewhere else (which breaks refcounting). But Tegra is using drm_framebuffer_remove and a free-standing FB, so this is redundant. One caveat here is that the failure path in the init code still manually cleaned up the fb. I presume that was an oversight and changed it over to drm_framebuffer_remove too. Cc: Thierry Reding Reviewed-by: Archit Taneja Acked-by: Thierry Reding Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-5-git-send-email-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/1482835765-12044-2-git-send-email-daniel.vetter@ffwll.ch

drm: Nuke fb->depth

2016-12-15T12:55:33Z

Replace uses of fb->depth with fb->format->depth. Less duplicate information is a good thing. @@ struct drm_framebuffer *fb; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - fb->depth = E; ... } @@ struct nouveau_framebuffer *fb; @@ - fb->base.depth + fb->base.format->depth @@ struct drm_framebuffer fb; @@ - fb.depth + fb.format->depth @@ struct drm_framebuffer *fb; @@ - fb->depth + fb->format->depth @@ struct drm_framebuffer fb; @@ - (fb.format->depth) + fb.format->depth @@ struct drm_framebuffer *fb; @@ - (fb->format->depth) + fb->format->depth @@ @@ struct drm_framebuffer { ... - unsigned int depth; ... }; v2: Drop the vmw stuff (Daniel) Rerun spatch due to code changes Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Reviewed-by: Alex Deucher Reviewed-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1481751095-18249-1-git-send-email-ville.syrjala@linux.intel.com

drm: Replace drm_format_num_planes() with fb->format->num_planes

2016-12-15T12:55:31Z

Replace drm_format_num_planes(fb->pixel_format) with just fb->format->num_planes. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - drm_format_num_planes(a->pixel_format) + a->format->num_planes | - drm_format_num_planes(b.pixel_format) + b.format->num_planes ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - drm_format_num_planes(a->fb->pixel_format) + a->fb->format->num_planes | - drm_format_num_planes(b.fb->pixel_format) + b.fb->format->num_planes ) @@ struct drm_framebuffer *a; identifier T; @@ T = a->pixel_format <+... - drm_format_num_planes(T) + a->format->num_planes ...+> @@ struct drm_framebuffer b; identifier T; @@ T = b.pixel_format <+... - drm_format_num_planes(T) + b.format->num_planes ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart Suggested-by: Laurent Pinchart Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com

drm: Pass 'dev' to drm_helper_mode_fill_fb_struct()

2016-12-15T12:03:30Z

Pass the drm_device to drm_helper_mode_fill_fb_struct() so that we can populate fb->dev early. Will make it easier to use the fb before we register it. @@ identifier fb, mode_cmd; @@ void drm_helper_mode_fill_fb_struct( + struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_mode_fb_cmd2 *mode_cmd ); @@ identifier fb, mode_cmd; @@ void drm_helper_mode_fill_fb_struct( + struct drm_device *dev, struct drm_framebuffer *fb, const struct drm_mode_fb_cmd2 *mode_cmd ) { ... } @@ function func; identifier dev; expression E1, E2; @@ func(struct drm_device *dev, ...) { ... drm_helper_mode_fill_fb_struct( + dev, E1, E2); ... } @@ expression E1, E2; @@ drm_helper_mode_fill_fb_struct( + dev, E1, E2); v2: Rerun spatch due to code changes Signed-off-by: Ville Syrjälä Reviewed-by: Laurent Pinchart Reviewed-by: Alex Deucher Link: http://patchwork.freedesktop.org/patch/msgid/1481748539-18283-1-git-send-email-ville.syrjala@linux.intel.com

drm/tegra: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops

2016-11-14T06:56:58Z

Cc: Thierry Reding Signed-off-by: Stefan Christ Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1479078208-25221-13-git-send-email-contact@stefanchrist.eu

drm/tegra: Delete an unnecessary check before the function call "vunmap"

2016-07-18T07:11:30Z

The vunmap() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/b3fbdcaf-1bda-7ce9-935b-2d716727ec39@users.sourceforge.net