kernel.git/drivers/gpu/drm/sun4i/Makefile, branch linux-4.18.y

drm/sun4i: link in front-end code if needed

2018-07-09T07:54:33Z

When the base sun4i DRM driver is built-in but the back-end is a loadable module, we run into a link error: drivers/gpu/drm/sun4i/sun4i_drv.o: In function `sun4i_drv_probe': sun4i_drv.c:(.text+0x60c): undefined reference to `sun4i_frontend_of_table' The dependency is a bit tricky, the best workaround I have come up with is to use a Makefile hack to to interpret both CONFIG_DRM_SUN4I_BACKEND=m and CONFIG_DRM_SUN4I_BACKEND=y as a directive to build the front-end the same way as the main module. Fixes: dd0421f47505 ("drm/sun4i: Add a driver for the display frontend") Link: https://lore.kernel.org/lkml/20180301091908.zcptz3ezqr2c6ly5@flea/ Signed-off-by: Arnd Bergmann Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180706142847.2032381-1-arnd@arndb.de

drm/sun4i: Add Allwinner A31 MIPI-DSI controller support

2018-04-11T11:19:17Z

Most of the Allwinner SoCs since the A31 share the same MIPI-DSI controller. While that controller is mostly undocumented, the code is out there and has been cleaned up in order to be integrated into DRM. However, there's still some dark areas that are a bit unclear about how the block exactly operates. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/ad9e6224fced87c0889ddd2765d1942610061f72.1522835818.git-series.maxime.ripard@bootlin.com

drm/sun4i: Add support for H3 HDMI PHY variant

2018-03-02T07:45:49Z

While A83T HDMI PHY seems to be just customized Synopsys HDMI PHY, H3 HDMI PHY is completely custom PHY. However, they still have many things in common like clock and reset setup, setting sync polarity and more. Add support for H3 HDMI PHY variant. While documentation exists for this PHY variant, it doesn't go in great details. Because of that, almost all settings are copied from BSP linux 4.4. Interestingly, those settings are slightly different to those found in a older BSP with Linux 3.4. For now, no user visible difference was found between them. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-13-jernej.skrabec@siol.net

drm/sun4i: Implement A83T HDMI driver

2018-02-16T08:38:30Z

A83T has DW HDMI IP block with a custom PHY similar to Synopsys gen2 HDMI PHY. Only video output was tested, while HW also supports audio and CEC. Support for them will be added later. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-11-jernej.skrabec@siol.net

drm/sun4i: Add a driver for the display frontend

2018-01-22T14:15:38Z

The display frontend is an hardware block that can be used to implement some more advanced features like hardware scaling or colorspace conversions. It can also be used to implement the output format of the VPU. Let's create a minimal driver for it that will only enable the hardware scaling features. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/029cdc3478bf89d422f5e8d9e600baf5e48ce4db.1516613040.git-series.maxime.ripard@free-electrons.com

drm/sun4i: Add LVDS support

2018-01-04T19:37:17Z

The TCON supports the LVDS interface to output to a panel or a bridge. Let's add support for it. Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/7fbb85f33ee1d5009fde4f0d7d236e11ca58b114.1513854122.git-series.maxime.ripard@free-electrons.com

drm/sun4i: Add DE2 CSC library

2017-12-05T12:22:44Z

DE2 have many CSC units - channel input CSC, channel output CSC and mixer output CSC and maybe more. Fortunately, they have all same register layout, only base offsets differs. Add support only for channel output CSC for now. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-24-jernej.skrabec@siol.net

drm/sun4i: Add support for HW scaling to DE2

2017-12-05T12:22:44Z

Scaling is currently supported only for RGB framebuffers Coefficients and algorithm which coefficients to select are taken from BSP driver. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-22-jernej.skrabec@siol.net

drm/sun4i: Add support for DE2 VI planes

2017-12-05T12:22:43Z

This commit adds basic support for VI planes. They are meant for video overlay and because of that they support YUV formats too. However, using YUV format is not straightforward, so only RGB formats are supported for now. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-20-jernej.skrabec@siol.net

drm/sun4i: Reorganize UI layer code in DE2

2017-12-05T12:22:43Z

Till now, DE2 driver supported only UI planes. Before we add support for VI planes, lets split out UI layer specific code from common parts. This commit does the following: - renames sun8i_layer.c to sun8i_ui_layer.c - moves UI channel specific code to sun8i_ui_layer.c - moves common code from sun8i_layer.c to sun8i_mixer.c - renames function and structure names so it is apparent where they belong to No functional change is made. Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20171201060550.10392-19-jernej.skrabec@siol.net