kernel.git/drivers/gpu/drm/panel/panel-simple.c, branch linux-6.4.y

drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01

2023-09-13T07:48:15Z

[ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ] The connector type and pixel format are missing for this panel, add them to prevent various drivers from failing to determine either of those parameters. Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01") Signed-off-by: Marek Vasut Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs

2023-08-23T15:32:44Z

[ Upstream commit e8470c0a7bcaa82f78ad34282d662dd7bd9630c2 ] Commit 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909acd95a ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by: Luca Ceresoli Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com Signed-off-by: Sasha Levin

drm/panel: simple: Add Powertip PH800480T013 drm_display_mode flags

2023-07-23T11:53:36Z

[ Upstream commit 1c519980aced3da1fae37c1339cf43b24eccdee7 ] Add missing drm_display_mode DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC flags. Those are used by various bridges in the pipeline to correctly configure its sync signals polarity. Fixes: d69de69f2be1 ("drm/panel: simple: Add Powertip PH800480T013 panel") Signed-off-by: Marek Vasut Reviewed-by: Sam Ravnborg Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230615201602.565948-1-marex@denx.de Signed-off-by: Sasha Levin

drm/panel: simple: Add connector_type for innolux_at043tn24

2023-07-23T11:53:35Z

[ Upstream commit 2c56a751845ddfd3078ebe79981aaaa182629163 ] The innolux at043tn24 display is a parallel LCD. Pass the 'connector_type' information to avoid the following warning: panel-simple panel: Specify missing connector_type Signed-off-by: Fabio Estevam Fixes: 41bcceb4de9c ("drm/panel: simple: Add support for Innolux AT043TN24") Reviewed-by: Sam Ravnborg Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230620112202.654981-1-festevam@gmail.com Signed-off-by: Sasha Levin

drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01H

2023-07-19T14:35:52Z

[ Upstream commit f24b49550814fdee4a98b9552e35e243ccafd4a8 ] The previous setting was related to the overall dimension and not to the active display area. In the "PHYSICAL SPECIFICATIONS" section, the datasheet shows the following parameters: ---------------------------------------------------------- | Item | Specifications | unit | ---------------------------------------------------------- | Display area | 98.7 (W) x 57.5 (H) | mm | ---------------------------------------------------------- | Overall dimension | 105.5(W) x 67.2(H) x 4.96(D) | mm | ---------------------------------------------------------- Fixes: 966fea78adf2 ("drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H") Signed-off-by: Dario Binacchi Reviewed-by: Neil Armstrong [narmstrong: fixed Fixes commit id length] Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230516085039.3797303-1-dario.binacchi@amarulasolutions.com Signed-off-by: Sasha Levin

drm/panel-simple: Use ktime_get_boottime for delays

2022-11-29T22:24:22Z

ktime_get_boottime continues while the device is suspended. This change ensures that the resume path will not be delayed if the power off delay has already been met while the device is suspended Signed-off-by: Drew Davenport Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20221117133655.3.Iebd9f79aba0a62015fd2383fe6986c2d6fe12cfd@changeid

drm/panel: simple: set bpc field for logic technologies displays

2022-11-10T15:29:45Z

In case bpc is not set for a panel it then throws a WARN(). Add bpc to the panels logictechno_lt170410_2whc and logictechno_lt161010_2nh. Fixes: 5728fe7fa539 ("drm/panel: simple: add display timings for logic technologies displays") Signed-off-by: Aishwarya Kothari Signed-off-by: Francesco Dolcini Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20220831141622.39605-1-francesco.dolcini@toradex.com

Merge tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm

2022-10-05T18:24:12Z

Pull drm updates from Dave Airlie: "Lots of stuff all over, some new AMD IP support and gang submit support. i915 has further DG2 and Meteorlake pieces, and a bunch of i915 display refactoring. msm has a shrinker rework. There are also a bunch of conversions to use kunit. This has two external pieces, some MEI changes needed for future Intel discrete GPUs. These should be acked by Greg. There is also a cross maintainer shared tree with some backlight rework from Hans in here. Core: - convert selftests to kunit - managed init for more objects - move to idr_init_base - rename fb and gem cma helpers to dma - hide unregistered connectors from getconnector ioctl - DSC passthrough aux support - backlight handling improvements - add dma_resv_assert_held to vmap/vunmap edid: - move luminance calculation to core fbdev: - fix aperture helper usage fourcc: - add more format helpers - add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx, DRM_FORMAT_Dxx - add packed AYUV8888, XYUV8888 - add some kunit tests ttm: - allow bos without backing store - rewrite placement to use intersect/compatible functions dma-buf: - docs update - improve signalling when debugging udmabuf: - fix failure path GPF dp: - drop dp/mst legacy code - atomic mst state support - audio infoframe packing panel: - Samsung LTL101AL01 - B120XAN01.0 - R140NWF5 RH - DMT028VGHMCMI-1A T - AUO B133UAN02.1 - IVO M133NW4J-R3 - Innolux N120ACA-EA1 amdgpu: - Gang submit support - Mode2 reset for RDNA2 - New IP support: DCN 3.1.4, 3.2 SMU 13.x NBIO 7.7 GC 11.x PSP 13.x SDMA 6.x GMC 11.x - DSC passthrough support - PSP fixes for TA support - vangogh GFXOFF stats - clang fixes - gang submit CS cleanup prep work - fix VRAM eviction issues amdkfd: - GC 10.3 IP ISA fixes - fix CRIU regression - CPU fault on COW mapping fixes i915: - align fw versioning with kernel practices - add display substruct to i915 private - add initial runtime info to driver info - split out HDCP and backlight registers - MEI XeHP SDV GSC support - add per-gt sysfs defaults - TLB invalidation improvements - Disable PCI BAR resize on 32-bit - GuC firmware updates and compat changes - GuC log timestamp translation - DG2 preemption workaround changes - DG2 improved HDMI pixel clocks support - PCI BAR sanity checks - Enable DC5 on DG2 - DG2 DMC fw bumped - ADL-S PCI ID added - Meteorlake enablement - Rename ggtt_view to gtt_view - host RPS fixes - release mmaps on rpm suspend on discrete - clocking and dpll refactoring - VBT definitions and parsing updates - SKL watermark code extracted to separate file - allow seamless M/N changes on eDP panels - BUG_ON removal and cleanups msm: - DPU: simplified VBIF configuration cleanup CTL interfaces - DSI: removed unused msm_display_dsc_config struct switch regulator calls to new API switched to PANEL_BRIDGE for direct attached panels - DSI_PHY: convert drivers to parent_hws - DP: cleanup pixel_rate handling - HDMI: turned hdmi-phy-8996 into OF clk provider - misc dt-bindings fixes - choose eDP as primary display if it's available - support getting interconnects from either the mdss or the mdp5/dpu device nodes - gem: Shrinker + LRU re-work: - adds a shared GEM LRU+shrinker helper and moves msm over to that - reduce lock contention between retire and submit by avoiding the need to acquire obj lock in retire path (and instead using resv seeing obj's busyness in the shrinker - fix reclaim vs submit issues - GEM fault injection for triggering userspace error paths - Map/unmap optimization - Improved robustness for a6xx GPU recovery virtio: - improve error and edge conditions handling - convert to use managed helpers - stop exposing LINEAR modifier mgag200: - split modeset handling per model udl: - suspend/disconnect handling improvements vc4: - rework HDMI power up - depend on PM - better unplugging support ast: - resolution handling improvements ingenic: - add JZ4760(B) support - avoid a modeset when sharpness property is unchanged - use the new PM ops it6505: - power seq and clock updates ssd130x: - regmap bulk write - use atomic helpers instead of simple helpers via: - rename via_drv to via_dri1, consolidate all code. radeon: - drop DP MST experimental support - delayed work flush fix - use time_after ti-sn65dsi86: - DP support mediatek: - MT8195 DP support - drop of_gpio header - remove unneeded result - small DP code improvements vkms: - RGB565, XRGB64 and ARGB64 support sun4i: - tv: convert to atomic rcar-du: - Synopsys DW HDMI bridge DT bindings update exynos: - use drm_display_info.is_hdmi - correct return of mixer_mode_valid and hdmi_mode_valid omap: - refcounting fix rockchip: - RK3568 support - RK3399 gamma support" * tag 'drm-next-2022-10-05' of git://anongit.freedesktop.org/drm/drm: (1374 commits) drm/amdkfd: Fix UBSAN shift-out-of-bounds warning drm/amdkfd: Track unified memory when switching xnack mode drm/amdgpu: Enable sram on vcn_4_0_2 drm/amdgpu: Enable VCN DPG for GC11_0_1 drm/msm: Fix build break with recent mm tree drm/panel: simple: Use dev_err_probe() to simplify code drm/panel: panel-edp: Use dev_err_probe() to simplify code drm/panel: simple: Add Multi-Inno Technology MI0800FT-9 dt-bindings: display: simple: Add Multi-Inno Technology MI0800FT-9 panel drm/amdgpu: correct the memcpy size for ip discovery firmware drm/amdgpu: Skip put_reset_domain if it doesn't exist drm/amdgpu: remove switch from amdgpu_gmc_noretry_set drm/amdgpu: Fix mc_umc_status used uninitialized warning drm/amd/display: Prevent OTG shutdown during PSR SU drm/amdgpu: add page retirement handling for CPU RAS drm/amdgpu: use RAS error address convert api in mca notifier drm/amdgpu: support to convert dedicated umc mca address drm/amdgpu: export umc error address convert interface drm/amdgpu: fix sdma v4 init microcode error drm/amd/display: fix array-bounds error in dc_stream_remove_writeback() ...

drm/panel: simple: Use dev_err_probe() to simplify code

2022-09-29T21:04:25Z

In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. Signed-off-by: Yuan Can Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-3-yuancan@huawei.com

drm/panel: simple: Add Multi-Inno Technology MI0800FT-9

2022-09-29T14:05:23Z

Add Multi-Inno Technology MI0800FT-9 8" 800x600 DPI panel support. Signed-off-by: Christoph Niedermaier Cc: Sam Ravnborg To: dri-devel@lists.freedesktop.org Signed-off-by: Marek Vasut Link: https://patchwork.freedesktop.org/patch/msgid/20220812114832.4946-1-cniedermaier@dh-electronics.com