kernel.git/drivers/gpu/drm/panel/Makefile, branch linux-5.13.y

drm/panel: Move OMAP's DSI command mode panel driver

2020-12-15T14:08:25Z

The panel driver is no longer using any OMAP specific APIs, so let's move it into the generic panel directory. Signed-off-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Cc: Thierry Reding Cc: Sam Ravnborg Acked-by: Sam Ravnborg Acked-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20201215104657.802264-40-tomi.valkeinen@ti.com

drm: panel: add Khadas TS050 panel driver

2020-12-07T13:57:40Z

This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. The init values was taken from the vendor source tree, comments were added to the know values but most of the init table is undocumented. Signed-off-by: Neil Armstrong Reviewed-by: Sam Ravnborg [narmstrong: call drm_panel_remove if mipi_dsi_attach fails] Link: https://patchwork.freedesktop.org/patch/msgid/20201204081949.38418-3-narmstrong@baylibre.com

drm/panel: Add ABT Y030XX067A 3.0" 320x480 panel

2020-11-17T13:59:56Z

Add support for the ShenZhen Asia Better Technology Ltd. Y030XX067A 3.0" 320x480 IPS panel. This panel can be found in the YLM RG-280M, RG-300 and RG-99 handheld gaming consoles. While being 320x480, it is actually a horizontal 4:3 panel with non-square pixels. Signed-off-by: Paul Cercueil Signed-off-by: Christophe Branchereau Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201101093150.8071-5-paul@crapouillou.net

drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices

2020-11-14T19:54:52Z

The OnePlus 6/T devices use different panels however they are functionally identical with the only differences being the resolution. The panels also don't seem to be used by any other devices, just combine them into one driver. The panels are: samsung,sofef00 and samsung,s6e3fc2x01 Signed-off-by: Caleb Connolly Signed-off-by: Sam Ravnborg [fixed checkpatch warnings] Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-2-caleb@connolly.tech

drm: panel: add TDO tl070wsh30 panel driver

2020-10-19T08:08:02Z

This adds support for the TDO TL070WSH30 TFT-LCD panel module. The panel has a 1024×600 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. Signed-off-by: Neil Armstrong Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200915121912.4347-5-narmstrong@baylibre.com

drm: panel: Add novatek nt36672a panel driver

2020-10-15T04:59:26Z

Novatek NT36672a is a generic DSI IC that drives command and video mode panels. Add the driver for it. Right now adding support for some Poco F1 phones that have an LCD panel from Tianma connected with this IC, with a resolution of 1080x2246 that operates in DSI video mode. During testing, Benni Steini helped us fix the reset sequence timing (from 10ms to 20ms), to get the bootanimation to work on Android. With current AOSP, we need to increase it to 200ms - this seems to be a safe high value to avoid a white screen occasionally. Signed-off-by: Sumit Semwal Cc: Benni Steini Reviewed-by: Bjorn Andersson Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200902064407.30712-3-sumit.semwal@linaro.org

drm/panel: s6e63m0: Add DSI transport

2020-09-04T23:23:45Z

This makes it possible to use the s6e63m0 panel with a DSI host, such as in the Samsung GT-I8190 (Golden) mobile phone. Signed-off-by: Linus Walleij Tested-by: Stephan Gerhold Cc: Stephan Gerhold Cc: Paweł Chmiel Acked-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/msgid/20200809215104.1830206-3-linus.walleij@linaro.org

drm/panel: s6e63m0: Break out SPI transport

2020-09-04T23:21:48Z

This panel can be accessed using both SPI and DSI. To make it possible to probe and use the device also from a DSI bus, first break out the SPI support to its own file. Since all the panel driver does is write DCS commands to the panel, we pass a DCS write function to probe() from each subdriver. We make the Kconfig entry for SPI mode default so all current users will continue to work. Signed-off-by: Linus Walleij Tested-by: Stephan Gerhold Cc: Paweł Chmiel Acked-by: Paul Cercueil Link: https://patchwork.freedesktop.org/patch/384873/

drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel

2020-08-18T16:37:23Z

The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. Signed-off-by: Guido Günther Reviewed-by: Sam Ravnborg Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/118c6e03dd0ff6e86e495579102cbf7d0cfca6f4.1597652012.git.agx@sigxcpu.org

drm/panel: rocktech-jh057n00900: Rename the driver to st7703

2020-07-01T17:22:49Z

This rename is done so that the driver matches the name of the display controller and in preparation for adding support for more panels to the driver. This is just a basic file rename, with no code changes. Signed-off-by: Ondrej Jirman Reviewed-by: Linus Walleij Tested-by: Guido Günther Reviewed-by: Guido Günther Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200701162928.1638874-5-megous@megous.com