kernel.git/drivers/gpu/drm/omapdrm/dss, branch linux-4.19.y

drm/omap: fix possible object reference leak

2020-10-01T11:14:33Z

[ Upstream commit 47340e46f34a3b1d80e40b43ae3d7a8da34a3541 ] The call to of_find_matching_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function. Signed-off-by: Wen Yang Reviewed-by: Laurent Pinchart Reviewed-by: Mukesh Ojha Cc: Tomi Valkeinen Cc: David Airlie Cc: Daniel Vetter Cc: Sebastian Reichel Cc: Laurent Pinchart Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Cc: Markus Elfring Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Sasha Levin

drm/omap: fix max fclk divider for omap36xx

2019-10-11T16:21:01Z

commit e2c4ed148cf3ec8669a1d90dc66966028e5fad70 upstream. The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk (in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not correct, and using divider of 32 breaks DSS with a flood or underflows and sync losts. Dividers up to 31 seem to work fine. There is another patch to the DT files to limit the divider correctly, but as the DSS driver also needs to know the maximum divider to be able to iteratively find good rates, we also need to do the fix in the DSS driver. Signed-off-by: Tomi Valkeinen Cc: Adam Ford Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.com Tested-by: Adam Ford Reviewed-by: Jyri Sarha Signed-off-by: Greg Kroah-Hartman

drm/omap: dsi: Fix PM for display blank with paired dss_pll calls

2019-05-31T13:46:34Z

[ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ] Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves the DSS clocks enabled when the display is blanked wasting about extra 5mW of power while idle. The clock that is left on by not calling dss_pll_disable() is DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for DSI PLL. We can fix this issue by by making the current dsi_pll_uninit() into dsi_pll_disable(). This way we can just call dss_pll_disable() from dsi_display_uninit_dsi() and the code becomes a bit easier to follow. However, we need to also consider that DSI PLL can be muxed for DVI too as pointed out by Tomi Valkeinen . In the DVI case, we want to unconditionally disable the clocks. To get around this issue, we separate out the DSI lane handling from dsi_pll_enable() and dsi_pll_disable() as suggested by Tomi in an earlier experimental patch. So we must only toggle the DSI regulator based on the vdds_dsi_enabled flag from dsi_display_init_dsi() and dsi_display_uninit_dsi(). We need to make these two changes together to avoid breaking things for DVI when fixing the DSI clock handling. And this all causes a slight renumbering of the error path for dsi_display_init_dsi(). Suggested-by: Tomi Valkeinen Signed-off-by: Tony Lindgren Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin

drm/omap: hdmi4_cec: Fix CEC clock handling for PM

2019-05-10T15:54:07Z

[ Upstream commit 36a1da15b5df493241b0011d2185fdd724ac1ed1 ] If CONFIG_OMAP4_DSS_HDMI_CEC is enabled in .config, deeper SoC idle states are blocked because the CEC clock gets always enabled on init. Let's fix the issue by moving the CEC clock handling to happen later in hdmi_cec_adap_enable() as suggested by Hans Verkuil . This way the CEC clock gets only enabled when needed. This can be tested by doing cec-ctl --playback to enable the CEC, and doing cec-ctl --clear to disable it. Let's also fix the typo for "divider" in the comments while at it. Fixes: 8d7f934df8d8 ("omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support") Suggested-by: Hans Verkuil Cc: Hans Verkuil Cc: Jyri Sarha Cc: Laurent Pinchart Signed-off-by: Tony Lindgren Reviewed-by: Hans Verkuil Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20190326151438.32414-1-tony@atomide.com Signed-off-by: Sasha Levin

drm/omap: fix email address

2018-06-28T10:41:05Z

Change tomi.valkeinen@nokia.com to tomi.valkeinen@ti.com. Signed-off-by: Tomi Valkeinen

drm/omap: Implement workaround for DRA7 errata ID:i932

2018-06-28T10:41:05Z

Description of DRA7 Errata i932: In rare circumstances DPLL_VIDEO1 and DPLL_VIDEO2 PLL's may not lock on the first attempt during DSS initialization. When this occurs, a subsequent attempt to relock the PLL will result in PLL successfully locking. This patch does the following as per the errata recommendation: - retries locking the PLL upto 20 times. - The time to wait for a PLL lock set to 1000 REFCLK cycles. We use usleep_range to wait for 1000 REFCLK cycles in the us range. This tight constraint is imposed as a lock later than 1000 REFCLK cycles may have high jitter. - Criteria for PLL lock is extended from check on just the PLL_LOCK bit to check on 6 PLL_STATUS bits. Silicon Versions Impacted: DRA71, DRA72, DRA74, DRA76 - All silicon revisions AM57x - All silicon revisions OMAP4/5 are not impacted by this errata Signed-off-by: Venkateswara Rao Mandela [tomi.valkeinen@ti.com: ported to v4.14] Signed-off-by: Tomi Valkeinen

drm/omap: fix NULL deref crash with SDI displays

2018-05-24T16:14:46Z

Fix a NULL deref bug introduced in commit 24aac6011f70 ("drm: omapdrm: sdi: Allocate the sdi private data structure dynamically"). Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/2f803bfc-3ffe-332a-7b9a-d59a39db4630@ti.com Fixes: 24aac6011f70 ("drm: omapdrm: sdi: Allocate the sdi private data structure dynamically") Reported-by: Tony Lindgren Tested-by: Tony Lindgren Reviewed-by: Benoit Parrot

drm/omap: add missing linefeeds to prints

2018-05-07T14:19:12Z

A bunch of debug and error prints are missing linefeeds. Add those. Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-4-tomi.valkeinen@ti.com Reviewed-by: Benoit Parrot Reviewed-by: Peter Ujfalusi Signed-off-by: Sean Paul

drm/omap: handle error if scale coefs are not found

2018-05-07T14:19:12Z

If get_scale_coef functions fail, they return NULL, but we never check the return value and could do a NULL deref. This should not happen as we ought to validate the amount of scaling already earlier, but to be safe, add the necessary check. Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-3-tomi.valkeinen@ti.com Reviewed-by: Benoit Parrot Reviewed-by: Peter Ujfalusi Signed-off-by: Sean Paul

drm/omap: check return value from soc_device_match

2018-05-07T14:19:11Z

soc_device_match() can return NULL, so add a check and fail if soc_device_match() fails. Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-2-tomi.valkeinen@ti.com Reviewed-by: Benoit Parrot Reviewed-by: Peter Ujfalusi Signed-off-by: Sean Paul