kernel.git/drivers/gpu/drm/msm, branch linux-5.19.y

drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa()

2022-10-24T07:57:21Z

[ Upstream commit aa0bff10af1c4b92e6b56e3e1b7f81c660d3ba78 ] At current implementation there is an extra 0 at 1.62G link rate which cause no correct pixel_div selected for 1.62G link rate to calculate mvid and nvid. This patch delete the extra 0 to have mvid and nvid be calculated correctly. Changes in v2: -- fix Fixes tag's text Changes in v3: -- fix misspelling of "Reviewed-by" Fixes: 937f941ca06f ("drm/msm/dp: Use qmp phy for DP PLL and PHY") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/499328/ Link: https://lore.kernel.org/r/1661372150-3764-1-git-send-email-quic_khsieh@quicinc.com [DB: rewrapped commit message] Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx

2022-10-24T07:57:21Z

[ Upstream commit 7538f80ae0d98bf51eb89eee5344aec219902d42 ] Remove loops over hw_vbif. Instead always VBIF's idx as an index in the array. This fixes an error in dpu_kms_hw_init(), where we fill dpu_kms->hw_vbif[i], but check for an error pointer at dpu_kms->hw_vbif[vbif_idx]. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/489569/ Link: https://lore.kernel.org/r/20220615125703.24647-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: lookup the ICC paths in both mdp5/dpu and mdss devices

2022-10-24T07:57:21Z

[ Upstream commit 5ccdcecaf8f732f593e359ebfb65de96b11bae66 ] The commit 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components") changed the MDP5 driver to look for the interconnect paths in the MDSS device rather than in the MDP5 device itself. This was left unnoticed since on my testing devices the interconnects probably didn't reach the sync state. Rather than just using the MDP5 device for ICC path lookups for the MDP5 devices, introduce an additional helper to check both MDP5/DPU and MDSS nodes. This will be helpful for the MDP5->DPU conversion, since the driver will have to check both nodes. Fixes: 6874f48bb8b0 ("drm/msm: make mdp5/dpu devices master components") Reported-by: Marijn Suijten Reported-by: Yassine Oudjana Signed-off-by: Dmitry Baryshkov Tested-by: Marijn Suijten # On sdm630 Tested-by: Yassine Oudjana # msm8996 Patchwork: https://patchwork.freedesktop.org/patch/496488/ Link: https://lore.kernel.org/r/20220805115630.506391-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm: Make .remove and .shutdown HW shutdown consistent

2022-10-24T07:57:18Z

[ Upstream commit 0a58d2ae572adaec8d046f8d35b40c2c32ac7468 ] Drivers' .remove and .shutdown callbacks are executed on different code paths. The former is called when a device is removed from the bus, while the latter is called at system shutdown time to quiesce the device. This means that some overlap exists between the two, because both have to take care of properly shutting down the hardware. But currently the logic used in these two callbacks isn't consistent in msm drivers, which could lead to kernel panic. For example, on .remove the component is deleted and its .unbind callback leads to the hardware being shutdown but only if the DRM device has been marked as registered. That check doesn't exist in the .shutdown logic and this can lead to the driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't been properly initialized. A situation like this can happen if drivers for expected sub-devices fail to probe, since the .bind callback will never be executed. If that is the case, drm_atomic_helper_shutdown() will attempt to take mutexes that are only initialized if drm_mode_config_init() is called during a device bind. This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix shutdown hook in case GPU components failed to bind"), but unfortunately it still happens in some cases as the one mentioned above, i.e: systemd-shutdown[1]: Powering off. kvm: exiting hardware virtualization platform wifi-firmware.0: Removing from iommu group 12 platform video-firmware.0: Removing from iommu group 10 ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0 ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0 lr : drm_modeset_lock_all_ctx+0x48/0x3d0 sp : ffff80000805bb80 x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030 x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800 x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0 Call trace: drm_modeset_lock_all_ctx+0x3c4/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 ---[ end trace 0000000000000000 ]--- Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000 [0000000000000018] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Hardware name: Google CoachZ (rev3+) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : ww_mutex_lock+0x28/0x32c lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0 sp : ffff80000805bb50 x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000018 x23: ffff80000805bc10 x22: ffff327c039c5ad8 x21: ffff327c039c5800 x20: ffff80000805bbe8 x19: 0000000000000018 x18: 0000000000000034 x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000 x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff327c00128000 x1 : 0000000000000000 x0 : 0000000000000018 Call trace: ww_mutex_lock+0x28/0x32c drm_modeset_lock_all_ctx+0x1b0/0x3d0 drm_atomic_helper_shutdown+0x70/0x134 msm_drv_shutdown+0x30/0x40 platform_shutdown+0x28/0x40 device_shutdown+0x148/0x350 kernel_power_off+0x38/0x80 __do_sys_reboot+0x288/0x2c0 __arm64_sys_reboot+0x28/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x44/0xec do_el0_svc+0x2c/0xc0 el0_svc+0x2c/0x84 el0t_64_sync_handler+0x11c/0x150 el0t_64_sync+0x18c/0x190 Code: aa0103f4 d503201f d2800001 aa0103e3 (c8e37c02) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Kernel Offset: 0x495d77c00000 from 0xffff800008000000 PHYS_OFFSET: 0xffffcd8500000000 CPU features: 0x800,00c2a015,19801c82 Memory Limit: none ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]--- Fixes: 9d5cbf5fe46e ("drm/msm: add shutdown support for display platform_driver") Signed-off-by: Javier Martinez Canillas Reviewed-by: Abhinav Kumar Link: https://patchwork.freedesktop.org/patch/msgid/20220816134612.916527-1-javierm@redhat.com Signed-off-by: Sasha Levin

drm/msm/rd: Fix FIFO-full deadlock

2022-09-20T10:43:46Z

[ Upstream commit 174974d8463b77c2b4065e98513adb204e64de7d ] If the previous thing cat'ing $debugfs/rd left the FIFO full, then subsequent open could deadlock in rd_write() (because open is blocked, not giving a chance for read() to consume any data in the FIFO). Also it is generally a good idea to clear out old data from the FIFO. Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/496706/ Link: https://lore.kernel.org/r/20220807160901.2353471-2-robdclark@gmail.com Signed-off-by: Sasha Levin

drm/msm/gpu: Drop qos request if devm_devfreq_add_device() fails

2022-09-08T09:23:57Z

[ Upstream commit 02b9f2636209beb843ca501d47f7fddc8792b2d7 ] In the event that devm_devfreq_add_device() fails the device's qos freq list is left referencing df->idle_freq and df->boost_freq. Attempting to initialize devfreq again after a probe deferral will then cause invalid memory accesses in dev_pm_qos_add_request(). Fix this by dropping the requests in the error path. Fixes: 7c0ffcd40b16 ("drm/msm/gpu: Respect PM QoS constraints") Signed-off-by: Bjorn Andersson Reviewed-by: Rob Clark Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/493001/ Link: https://lore.kernel.org/r/20220708162632.3529864-1-bjorn.andersson@linaro.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: Fix number of regulators for SDM660

2022-09-08T09:23:57Z

[ Upstream commit a1653a75987749ba6dba94fa2e62f0f36b387d1a ] 1 regulator is listed but the number 2 is specified. This presumably means we try to get a regulator with no name. Fix it. Fixes: 462f7017a691 ("drm/msm/dsi: Fix DSI and DSI PHY regulator config from SDM660") Signed-off-by: Douglas Anderson Reviewed-by: Dmitry Baryshkov Reviewed-by: Marijn Suijten Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/496323/ Link: https://lore.kernel.org/r/20220804073608.v4.2.I94b3c3e412b7c208061349f05659e126483171b1@changeid Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg

2022-09-08T09:23:57Z

[ Upstream commit 1e00d6ac8a3422765bae37aeac2002dfd3c0bda6 ] 3 regulators are listed but the number 2 is specified. Fix it. Fixes: 3a3ff88a0fc1 ("drm/msm/dsi: Add 8x96 info in dsi_cfg") Signed-off-by: Douglas Anderson Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/496318/ Link: https://lore.kernel.org/r/20220804073608.v4.1.I1056ee3f77f71287f333279efe4c85f88d403f65@changeid Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4

2022-09-08T09:23:57Z

[ Upstream commit 032d57960176ac01cc5adff5bcc5eb51317f8781 ] Data Symbols scrambled is required for tps4 at link training 2. Therefore SCRAMBLING_DISABLE bit should not be set for tps4 to work. RECOVERED_CLOCK_OUT_EN is for enable simple EYE test for jitter measurement with minimal equipment for embedded applications purpose and is not required to be set during normal operation. Current implementation always have RECOVERED_CLOCK_OUT_EN bit set which cause SCRAMBLING_DISABLE bit wrongly set at tps4 which prevent tps4 from working. This patch delete setting RECOVERED_CLOCK_OUT_EN to fix SCRAMBLING_DISABLE be wrongly set at tps4. Changes in v2: -- fix Fixes tag Changes in v3: -- revise commit text Changes in v4: -- fix commit text newline Changes in v5: -- fix commit text line over 75 chars Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Kuogee Hsieh Reviewed-by: Abhinav Kumar Reviewed-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/497194/ Link: https://lore.kernel.org/r/1660258670-4200-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dpu: populate wb or intf before reset_intf_cfg

2022-09-08T09:23:57Z

[ Upstream commit ef3ac3ae147c6ab370875727791e9b3eaf176cea ] dpu_encoder_helper_phys_cleanup() was not populating neither wb or intf to the intf_cfg before calling the reset_intf_cfg(). This causes the reset of the active bits of wb/intf to be skipped which is incorrect. Fix this by populating the relevant wb or intf indices correctly. Fixes: ae4d721ce100 ("drm/msm/dpu: add an API to reset the encoder related hw blocks") Signed-off-by: Abhinav Kumar Reviewed-by: Jessica Zhang Tested-by: Jessica Zhang # Trogdor (SC8170) Patchwork: https://patchwork.freedesktop.org/patch/494298/ Link: https://lore.kernel.org/r/1657912468-17254-1-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Sasha Levin