kernel.git/drivers/gpu/drm/msm, branch linux-5.16.y

drm/msm/dsi: Remove spurious IRQF_ONESHOT flag

2022-04-13T18:03:02Z

[ Upstream commit 24b176d8827d167ac3b379317f60c0985f6e95aa ] Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts which need to keep the irq line disabled until the threaded handler has been run.". When applied to an interrupt that doesn't request a threaded irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect, which it to disable the forced threading of irqs (and for "normal" kernels it is a nop). In this case I can find no evidence that suppressing forced threading is intentional. Had it been intentional then a driver must adopt the raw_spinlock API in order to avoid deadlocks on PREEMPT_RT kernels (and avoid calling any kernel API that uses regular spinlocks). Fix this by removing the spurious additional flag. This change is required for my Snapdragon 7cx Gen2 tablet to boot-to-GUI with PREEMPT_RT enabled. Signed-off-by: Daniel Thompson Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220201174734.196718-2-daniel.thompson@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/a6xx: Fix missing ARRAY_SIZE() check

2022-04-08T12:06:14Z

[ Upstream commit cca96584b35765bf9eb5f38ca55a144ea2ba0de4 ] Fixes: f6d62d091cfd ("drm/msm/a6xx: add support for Adreno 660 GPU") Signed-off-by: Rob Clark Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220305173405.914989-1-robdclark@gmail.com Signed-off-by: Sasha Levin

drm/msm/dpu: fix dp audio condition

2022-04-08T12:06:08Z

[ Upstream commit 1e0505a5a7a2fea243f8e6d7e13fcde65f9e41bc ] DP audio enablement code which is comparing intf_type, DRM_MODE_ENCODER_TMDS (= 2) with DRM_MODE_CONNECTOR_DisplayPort (= 10). Which would never succeed. Fix it to check for DRM_MODE_ENCODER_TMDS. Fixes: d13e36d7d222 ("drm/msm/dp: add audio support for Display Port on MSM") Reviewed-by: Abhinav Kumar Reviewed-by: Bjorn Andersson Reviewed-by: Stephen Boyd Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220217035358.465904-2-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dpu: add DSPP blocks teardown

2022-04-08T12:06:08Z

[ Upstream commit d5c5e78f217172e87d8fb2c3418dd8b58b4adfcb ] Add missing calls to dpu_hw_dspp_destroy() to free resources allocated for DSPP hardware blocks. Fixes: e47616df008b ("drm/msm/dpu: add support for color processing blocks in dpu driver") Signed-off-by: Dmitry Baryshkov Reviewed-by: Stephen Boyd Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20220121210618.3482550-3-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy: fix 7nm v4.0 settings for C-PHY mode

2022-04-08T12:06:08Z

[ Upstream commit bb07af2ed2a47dc6c4d0681f275bb27d4f845465 ] The dsi_7nm_phy_enable() disagrees with downstream for glbl_str_swi_cal_sel_ctrl and glbl_hstx_str_ctrl_0 values. Update programmed settings to match downstream driver. To remove the possibility for such errors in future drop less_than_1500_mhz assignment and specify settings explicitly. Fixes: 5ac178381d26 ("drm/msm/dsi: support CPHY mode for 7nm pll/phy") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Link: https://lore.kernel.org/r/20220217000837.435340-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent

2022-04-08T12:06:08Z

[ Upstream commit 3a3ee71bd8e14c5e852c71f317eebfda8f88dff0 ] All DSI PHY/PLL drivers were referencing their VCO parent clock by a global name, most of which don't exist or have been renamed. These clock drivers seem to function fine without that except the 14nm driver for sdm6xx [1]. At the same time all DTs provide a "ref" clock as per the requirements of dsi-phy-common.yaml, but the clock is never used. This patchset puts that clock to use without relying on a global clock name, so that all dependencies are explicitly defined in DT (the firmware) in the end. Note that this patch intentionally breaks older firmware (DT) that relies on the clock to be found globally instead. The only affected platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is left in place to accommodate a more graceful transition period. All other platforms had the "ref" clock added to their phy node since its inception, or in a followup patch some time after. These patches wrongly assumed that the "ref" clock was actively used and have hence been listed as "Fixes:" below. Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of 27MHz pxo clock, which has been addressed in [3]. It is expected that both [2] and [3] are applied to the tree well in advance of this patch such that any actual breakage is extremely unlikely, but might still occur if kernel upgrades are performed without the DT to match. After some time the fallback for msm8974 can be removed again as well. [1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@somainline.org/ [2]: https://lore.kernel.org/linux-arm-msm/20210830175739.143401-1-marijn.suijten@somainline.org/ [3]: https://lore.kernel.org/linux-arm-msm/20210829203027.276143-2-marijn.suijten@somainline.org/ Fixes: 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY") Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY") Fixes: 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs") Signed-off-by: Marijn Suijten Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210911131922.387964-2-marijn.suijten@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: always add fail-safe mode into connector mode list

2022-04-08T12:06:08Z

[ Upstream commit d4aca422539c441a7f3fec749287b36de37d9b6b ] Some of DP link compliant test expects to return fail-safe mode if prefer detailed timing mode can not be supported by mainlink's lane and rate after link training. Therefore add fail-safe mode into connector mode list as backup mode. This patch fixes test case 4.2.2.1. Changes in v2: -- add Fixes text string Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1643066274-25814-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: stop link training after link training 2 failed

2022-04-08T12:06:08Z

[ Upstream commit 9051d629dbf7a998a40f7eac65a9512b01bc3bb8 ] Each DP link training contains link training 1 followed by link training 2. There is maximum of 5 retries of DP link training before declared link training failed. It is required to stop link training at end of link training 2 if it is failed so that next link training 1 can start freshly. This patch fixes link compliance test case 4.3.1.13 (Source Device Link Training EQ Fallback Test). Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready") Signed-off-by: Kuogee Hsieh Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1642531648-8448-5-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dp: populate connector of struct dp_panel

2022-04-08T12:06:08Z

[ Upstream commit 5e602f5156910c7b19661699896cb6e3fb94fab9 ] DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose and expect DP source return correct checksum. During drm edid read, correct edid checksum is calculated and stored at connector::real_edid_checksum. The problem is struct dp_panel::connector never be assigned, instead the connector is stored in struct msm_dp::connector. When we run compliance testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid edid set in struct dp_panel::edid so we'll try to use the connectors real_edid_checksum and hit a NULL pointer dereference error because the connector pointer is never assigned. Changes in V2: -- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps() Changes in V3: -- remove unhelpful kernel crash trace commit text -- remove renaming dp_display parameter to dp Changes in V4: -- add more details to commit text Changes in v10: -- group into one series Changes in v11: -- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read Fixes: 7948fe12d47 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read") Signee-off-by: Kuogee Hsieh Reviewed-by: Bjorn Andersson Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/1642531648-8448-3-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/a6xx: Add missing suspend_count increment

2022-02-01T16:29:17Z

[ Upstream commit 860a7b2a87b7c743154824d0597b6c3eb3b53154 ] Reported-by: Danylo Piliaiev Fixes: 3ab1c5cc3939 ("drm/msm: Add param for userspace to query suspend count") Signed-off-by: Rob Clark Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220113163215.215367-1-robdclark@gmail.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin