kernel.git/drivers/gpu/drm/msm/dsi, branch linux-6.1.y

drm/msm/dsi/phy_7nm: Fix missing initial VCO rate

2025-12-06T21:12:21Z

[ Upstream commit 5ddcb0cb9d10e6e70a68e0cb8f0b8e3a7eb8ccaf ] Driver unconditionally saves current state on first init in dsi_pll_7nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_7nm_pll_restore_state(). Restoring calls dsi_pll_7nm_vco_set_rate() with pll_7nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657827/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-9-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/phy: Toggle back buffer resync after preparing PLL

2025-12-06T21:12:21Z

[ Upstream commit b63f008f395ca5f6bc89123db97440bdc19981c4 ] According to Hardware Programming Guide for DSI PHY, the retime buffer resync should be done after PLL clock users (byte_clk and intf_byte_clk) are enabled. Downstream also does it as part of configuring the PLL. Driver was only turning off the resync FIFO buffer, but never bringing it on again. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/657823/ Link: https://lore.kernel.org/r/20250610-b4-sm8750-display-v6-6-ee633e3ddbff@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi/dsi_phy_10nm: Fix missing initial VCO rate

2025-06-27T10:07:38Z

[ Upstream commit 8a48e35becb214743214f5504e726c3ec131cd6d ] Driver unconditionally saves current state on first init in dsi_pll_10nm_init(), but does not save the VCO rate, only some of the divider registers. The state is then restored during probe/enable via msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() -> dsi_10nm_pll_restore_state(). Restoring calls dsi_pll_10nm_vco_set_rate() with pll_10nm->vco_current_rate=0, which basically overwrites existing rate of VCO and messes with clock hierarchy, by setting frequency to 0 to clock tree. This makes anyway little sense - VCO rate was not saved, so should not be restored. If PLL was not configured configure it to minimum rate to avoid glitches and configuring entire in clock hierarchy to 0 Hz. Suggested-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/ Signed-off-by: Krzysztof Kozlowski Fixes: a4ccc37693a2 ("drm/msm/dsi_pll_10nm: restore VCO rate during Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/654796/ Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Set PHY usescase (and mode) before registering DSI host

2025-04-10T12:33:32Z

[ Upstream commit 660c396c98c061f9696bebacc178b74072e80054 ] Ordering issues here cause an uninitialized (default STANDALONE) usecase to be programmed (which appears to be a MUX) in some cases when msm_dsi_host_register() is called, leading to the slave PLL in bonded-DSI mode to source from a clock parent (dsi1vco) that is off. This should seemingly not be a problem as the actual dispcc clocks from DSI1 that are muxed in the clock tree of DSI0 are way further down, this bit still seems to have an effect on them somehow and causes the right side of the panel controlled by DSI1 to not function. In an ideal world this code is refactored to no longer have such error-prone calls "across subsystems", and instead model the "PLL src" register field as a regular mux so that changing the clock parents programmatically or in DTS via `assigned-clock-parents` has the desired effect. But for the avid reader, the clocks that we *are* muxing into DSI0's tree are way further down, so if this bit turns out to be a simple mux between dsiXvco and out_div, that shouldn't have any effect as this whole tree is off anyway. Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY") Reviewed-by: Abhinav Kumar Reviewed-by: Dmitry Baryshkov Signed-off-by: Marijn Suijten Patchwork: https://patchwork.freedesktop.org/patch/637650/ Link: https://lore.kernel.org/r/20250217-drm-msm-initial-dualpipe-dsc-fixes-v3-2-913100d6103f@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: fix 32-bit signed integer extension in pclk_rate calculation

2024-11-01T00:55:59Z

[ Upstream commit 358b762400bd94db2a14a72dfcef74c7da6bd845 ] When (mode->clock * 1000) is larger than (1<<31), int to unsigned long conversion will sign extend the int to 64 bits and the pclk_rate value will be incorrect. Fix this by making the result of the multiplication unsigned. Note that above (1<<32) would still be broken and require more changes, but its unlikely anyone will need that anytime soon. Fixes: c4d8cfe516dc ("drm/msm/dsi: add implementation for helper functions") Signed-off-by: Jonathan Marek Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/618434/ Link: https://lore.kernel.org/r/20241007050157.26855-2-jonathan@marek.ca Signed-off-by: Abhinav Kumar Signed-off-by: Sasha Levin

drm/msm/dsi: set VIDEO_COMPRESSION_MODE_CTRL_WC

2024-08-03T06:49:13Z

[ Upstream commit 9ecd0ddd223b68b4603e4766a1d51f6c6cda346e ] Video mode DSC won't work if this field is not set correctly. Set it to fix video mode DSC (for slice_per_pkt==1 cases at least). Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by: Jonathan Marek Reviewed-by: Dmitry Baryshkov Signed-off-by: Jun Nie Tested-by: Neil Armstrong # on SM8550-QRD Tested-by: Neil Armstrong # on SM8650-QRD Tested-by: Neil Armstrong # on SM8650-HDK Reviewed-by: Jessica Zhang Patchwork: https://patchwork.freedesktop.org/patch/596234/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-5-2ab1d334c657@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Print dual-DSI-adjusted pclk instead of original mode pclk

2024-06-12T09:03:45Z

[ Upstream commit f12e0e12524a34bf145f7b80122e653ffe3d130a ] When dual-DSI (bonded DSI) was added in commit ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") some DBG() prints were not updated, leading to print the original mode->clock rather than the adjusted (typically the mode clock divided by two, though more recently also adjusted for DSC compression) msm_host->pixel_clk_rate which is passed to clk_set_rate() just below. Fix that by printing the actual pixel_clk_rate that is being set. Fixes: ed9976a09b48 ("drm/msm/dsi: adjust dsi timing for dual dsi mode") Signed-off-by: Marijn Suijten Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/589896/ Link: https://lore.kernel.org/r/20240417-drm-msm-initial-dualpipe-dsc-fixes-v1-1-78ae3ee9a697@somainline.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: Enable runtime PM

2024-02-05T20:13:02Z

commit 6ab502bc1cf3147ea1d8540d04b83a7a4cb6d1f1 upstream. Some devices power the DSI PHY/PLL through a power rail that we model as a GENPD. Enable runtime PM to make it suspendable. Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/543352/ Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-2-a11a751f34f0@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks

2024-01-25T23:27:33Z

[ Upstream commit 3d07a411b4faaf2b498760ccf12888f8de529de0 ] This helper has been introduced to avoid programmer errors (missing _put calls leading to dangling refcnt) when using pm_runtime_get, use it. While at it, start checking the return value. Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Fixes: 5c8290284402 ("drm/msm/dsi: Split PHY drivers to separate files") Patchwork: https://patchwork.freedesktop.org/patch/543350/ Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-1-a11a751f34f0@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: free TX buffer in unbind

2023-11-20T10:52:01Z

[ Upstream commit 5e05be78264594634860087953649487f486ffcc ] If the drm/msm init code gets an error during output modeset initialisation, the kernel will report an error regarding DRM memory manager not being clean during shutdown. This is because msm_dsi_modeset_init() allocates a piece of GEM memory for the TX buffer, but destruction of the buffer happens only at msm_dsi_host_destroy(), which is called during DSI driver's remove() time, much later than the DRM MM shutdown. To solve this issue, move the TX buffer destruction to dsi_unbind(), so that the buffer is destructed at the correct time. Note, we also have to store a reference to the address space, because priv->kms->aspace is cleared before components are unbound. Reported-by: Bjorn Andersson Fixes: 8f59ee9a570c ("drm/msm/dsi: Adjust probe order") Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/562238/ Signed-off-by: Rob Clark Signed-off-by: Sasha Levin