kernel.git/drivers/gpu/drm/msm/dsi, branch linux-4.9.y

drm/msm/dsi: fix error checks and return values for DSI xmit functions

2022-06-14T14:52:31Z

[ Upstream commit f0e7e9ed379c012c4d6b09a09b868accc426223c ] As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code. This commits attempts to fix these issues both in TX and in RX paths. [1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/ Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Reported-by: Dan Carpenter Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Tested-by: Marijn Suijten Patchwork: https://patchwork.freedesktop.org/patch/480501/ Link: https://lore.kernel.org/r/20220401231104.967193-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/msm/dsi: fix off by one in dsi_bus_clk_enable error handling

2021-10-27T07:33:59Z

commit c8f01ffc83923a91e8087aaa077de13354a7aa59 upstream. This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52eba9e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by: Dan Carpenter Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20211001123409.GG2283@kili Signed-off-by: Dmitry Baryshkov Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman

drm/msm/dsi: Fix some reference counted resource leaks

2021-09-22T09:43:00Z

[ Upstream commit 6977cc89c87506ff17e6c05f0e37f46752256e82 ] 'of_find_device_by_node()' takes a reference that must be released when not needed anymore. This is expected to be done in 'dsi_destroy()'. However, there are 2 issues in 'dsi_get_phy()'. First, if 'of_find_device_by_node()' succeeds but 'platform_get_drvdata()' returns NULL, 'msm_dsi->phy_dev' will still be NULL, and the reference won't be released in 'dsi_destroy()'. Secondly, as 'of_find_device_by_node()' already takes a reference, there is no need for an additional 'get_device()'. Move the assignment to 'msm_dsi->phy_dev' a few lines above and remove the unneeded 'get_device()' to solve both issues. Fixes: ec31abf6684e ("drm/msm/dsi: Separate PHY to another platform device") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/f15bc57648a00e7c99f943903468a04639d50596.1628241097.git.christophe.jaillet@wanadoo.fr Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: Correct io_start for MSM8994 (20nm PHY)

2021-03-03T16:44:39Z

[ Upstream commit 33a7808ce1aea6e2edc1af25db25928137940c02 ] The previous registers were *almost* correct, but instead of PHYs, they were pointing at DSI PLLs, resulting in the PHY id autodetection failing miserably. Fixes: dcefc117cc19 ("drm/msm/dsi: Add support for msm8x94") Signed-off-by: Konrad Dybcio Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: save pll state before dsi host is powered off

2020-03-11T06:53:09Z

[ Upstream commit a1028dcfd0dd97884072288d0c8ed7f30399b528 ] Save pll state before dsi host is powered off. Without this change some register values gets resetted. Signed-off-by: Harigovindan P Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm: msm: Fix return type of dsi_mgr_connector_mode_valid for kCFI

2020-03-11T06:53:09Z

[ Upstream commit 7fd2dfc3694922eb7ace4801b7208cf9f62ebc7d ] I was hitting kCFI crashes when building with clang, and after some digging finally narrowed it down to the dsi_mgr_connector_mode_valid() function being implemented as returning an int, instead of an enum drm_mode_status. This patch fixes it, and appeases the opaque word of the kCFI gods (seriously, clang inlining everything makes the kCFI backtraces only really rough estimates of where things went wrong). Thanks as always to Sami for his help narrowing this down. Cc: Rob Clark Cc: Sean Paul Cc: Sami Tolvanen Cc: Todd Kjos Cc: Alistair Delva Cc: Amit Pundir Cc: Sumit Semwal Cc: freedreno@lists.freedesktop.org Cc: clang-built-linux@googlegroups.com Signed-off-by: John Stultz Reviewed-by: Nick Desaulniers Tested-by: Amit Pundir Signed-off-by: Rob Clark Signed-off-by: Sasha Levin

drm/msm/dsi: Implement reset correctly

2020-01-29T09:24:34Z

[ Upstream commit 78e31c42261779a01bc73472d0f65f15378e9de3 ] On msm8998, vblank timeouts are observed because the DSI controller is not reset properly, which ends up stalling the MDP. This is because the reset logic is not correct per the hardware documentation. The documentation states that after asserting reset, software should wait some time (no indication of how long), or poll the status register until it returns 0 before deasserting reset. wmb() is insufficient for this purpose since it just ensures ordering, not timing between writes. Since asserting and deasserting reset occurs on the same register, ordering is already guaranteed by the architecture, making the wmb extraneous. Since we would define a timeout for polling the status register to avoid a possible infinite loop, lets just use a static delay of 20 ms, since 16.666 ms is the time available to process one frame at 60 fps. Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Cc: Hai Li Cc: Rob Clark Signed-off-by: Jeffrey Hugo Reviewed-by: Sean Paul [seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS] Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.com Signed-off-by: Sasha Levin

drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks

2016-11-02T14:48:09Z

The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers. The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use. One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand. We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them. Cc: Stephen Boyd Signed-off-by: Archit Taneja Acked-by: Stephen Boyd Signed-off-by: Rob Clark

drm/msm/dsi: Queue HPD helper work in attach/detach callbacks

2016-11-02T14:48:09Z

The msm/dsi host drivers calls drm_helper_hpd_irq_event in the mipi_dsi_host attach/detatch callbacks. mipi_dsi_attach()/mipi_dsi_detach() from a panel/bridge driver could be called from a context where the drm_device's mode_config.mutex is already held, resulting in a deadlock. Queue it as work instead. Signed-off-by: Archit Taneja Signed-off-by: Rob Clark

drm/msm/dsi: Fix return value check in msm_dsi_host_set_display_mode()

2016-07-16T14:29:28Z

In case of error, the function drm_mode_duplicate() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun Reviewed-by: Archit Taneja Signed-off-by: Rob Clark